From: Rohan Carly <se456@rohan.id.au>
To: linux-media@vger.kernel.org
Subject: please update V4L-DVB wiki concerning Compro DVD-T300 support
Date: Fri, 11 Jun 2010 10:20:34 +0800 [thread overview]
Message-ID: <4C119D72.6010802@rohan.id.au> (raw)
Hi, I had success with some TV tuner hardware that wasn't listed on the
linuxtv.org V4L-DVB wiki. Could you please update it?
The relevant section is here:
http://www.linuxtv.org/wiki/index.php/DVB-T_PCI_Cards#Compro
My device is a Compro DVD-T300 (purchased in Australia):
lime:~# lspci | grep -i "saa"
01:06.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video
Broadcast Decoder (rev 01)
I use Debian 5 (lenny) and it seemed to be detected fine when I installed the
AMD64 kernel/system.
When I installed the 32-bit x86 kernel/system (using a 64bit cpu) detection
didn't seem to be automatic anymore.
Symptom: after modprobe saa7134 , /dev/video0 was created, but not /dev/dvb
Solution...
After reading this website:
http://en.gentoo-wiki.com/wiki/Saa7134
I discovered that I had to do instead
modprobe saa7134 card=70
zcat
/usr/share/doc/linux-doc-2.6.26/Documentation/video4linux/CARDLIST.saa7134.gz
| grep -i "compro"
19 -> Compro VideoMate TV [185b:c100]
40 -> Compro VideoMate TV PVR/FM [185b:c100]
41 -> Compro VideoMate TV Gold+ [185b:c100]
49 -> Compro VideoMate Gold+ Pal [185b:c200]
62 -> Compro VideoMate TV Gold+II
70 -> Compro Videomate DVB-T300 [185b:c900]
71 -> Compro Videomate DVB-T200 [185b:c901]
103 -> Compro Videomate DVB-T200A
139 -> Compro VideoMate T750 [185b:c900]
Hope this helps some people,
Rohan Carly.
next reply other threads:[~2010-06-11 2:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-11 2:20 Rohan Carly [this message]
2010-06-11 2:26 ` please update V4L-DVB wiki concerning Compro DVD-T300 support Devin Heitmueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C119D72.6010802@rohan.id.au \
--to=se456@rohan.id.au \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox