linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hamza Ferrag <hferraggreat@gmail.com>
To: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)
Date: Thu, 15 Jul 2010 13:17:20 +0200	[thread overview]
Message-ID: <4C3EEE40.4010407@gmail.com> (raw)
In-Reply-To: <4C3CB704.1040908@ginder.xs4all.nl>

Hi Hans,

Thanks for your quick feedback.

Any other suggestions guys ? .


Thanks in advance.

Hamza Ferrag.


On 13/07/2010 20:57, Hans Houwaard wrote:
> I don't really know why, but it happens sometimes on my machine with the
> same card as well. When I have problems, I power off the computer and
> then restart it again. The card will not properly load or function
> untill I do. There is probably some hardware lock that needs to be reset
> by powering off the card.
>
> The loading of the firmware sometimes takes a couple of seconds in my
> machine, it's not very fast. Besides check if the card, which is on a
> PCI-1x slot, doesn't share an IRQ with the onboard soundcard. That will
> seriously effect the performance of both the card and the sound.
>
> Good luck,
>
> Hans
>
> Op 13-07-10 20:28, Hamza Ferrag schreef:
>> Hi all,
>>
>> I am trying to install a 'Tevii S470' card from TeVii technology as
>> described here http://linuxtv.org/wiki/index.php/TeVii_S470.
>>
>> My configuration is :
>>
>> - intel x86 platform
>> - Kernel 2.6.27-21
>> - tevii_ds3000.tar.gz (firmware archive from
>> http://tevii.com/tevii_ds3000.tar.gz ),
>> - s2-liplianin mercurial sources ( from
>> http://mercurial.intuxication.org/hg/s2-liplianin)last changes at
>> 05/29/2010,
>>
>> All work fine i.e drivers/firmware installation after madprobe a right
>> modules.
>>
>> # lsmod
>> Module Size Used by Not tainted
>> cx23885 82416 0
>> tveeprom 9348 1 cx23885
>> btcx_risc 1928 1 cx23885
>> cx2341x 7748 1 cx23885
>> ir_common 23936 1 cx23885
>> videobuf_dma_sg 5060 1 cx23885
>> ir_core 3596 2 cx23885,ir_common
>> v4l2_common 8896 2 cx23885,cx2341x
>> videodev 25376 2 cx23885,v4l2_common
>> videobuf_dvb 2820 1 cx23885
>> videobuf_core 8388 3 cx23885,videobuf_dma_sg,videobuf_dvb
>> lnbp21 1024 0
>> dvb_core 54832 2 cx23885,videobuf_dvb
>> ds3000 9668 1
>>
>>
>> # dmesg
>> Linux video capture interface: v2.00
>> cx23885 driver version 0.0.2 loaded
>> CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
>> [card=15,autodetected]
>> cx23885_dvb_register() allocating 1 frontend(s)
>> cx23885[0]: cx23885 based dvb card
>> DS3000 chip version: 0.192 attached.
>> DVB: registering new adapter (cx23885[0])
>> DVB: registering adapter 0 frontend 0 (Montage Technology
>> DS3000/TS2020)...
>> cx23885_dev_checkrevision() Hardware revision = 0xb0
>> cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0,
>> mmio: 0xdf800000
>> cx23885 0000:03:00.0: setting latency timer to 64
>> tun: Universal TUN/TAP device driver, 1.6
>>
>>
>>
>> A problem appear when tunning card using szap-s2 :
>>
>> # szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
>>
>> reading channels from file '/root/channels.conf'
>> zapping to 1 'MyCh':
>> delivery DVB-S2, modulation 8PSK
>> sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff
>> 0.35
>> vpid 0x0286, apid 0x1fff, sid 0x0000
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> ds3000_firmware_ondemand: Waiting for firmware upload
>> (dvb-fe-ds3000.fw)...
>> firmware: requesting dvb-fe-ds3000.fw
>> ds3000_firmware_ondemand: Waiting for firmware upload(2)...
>> ds3000_firmware_ondemand: No firmware uploaded (timeout or file not
>> found?)
>> ds3000_tune: Unable initialise the firmware
>>
>> Apparently it can't locate a firmware file, yet :
>>
>> # ls -l /lib/firmware/
>> -rwxr-xr-x 1 root root 8192 May 3 07:09 dvb-fe-ds3000.fw
>>
>>
>> Any ideas why this happens?
>>
>> Thanks and best regards,
>>
>> Hamza Ferrag
>>
>>
>> _______________________________________________
>> linux-dvb users mailing list
>> For V4L/DVB development, please use instead linux-media@vger.kernel.org
>> linux-dvb@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>


      parent reply	other threads:[~2010-07-15 11:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-13 18:28 [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21) Hamza Ferrag
2010-07-13 18:57 ` Hans Houwaard
2010-07-14 12:34   ` ferrag hamza
2010-07-14 12:36     ` ferrag hamza
2010-09-03  8:42       ` TeVii S470 periodically fails to tune/lock - needs poweroff O&M Ugarcina
2010-09-03  8:46         ` [linux-dvb] TeVii S470 periodically fails to tune/lock - needspoweroff Karsten Siebert
2010-09-08  2:03           ` OM Ugarcina
2010-07-15 11:17   ` Hamza Ferrag [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C3EEE40.4010407@gmail.com \
    --to=hferraggreat@gmail.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).