From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ns2.embit.ro ([77.81.44.3]:43779 "EHLO pa-mx-2.embit.ro" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750803Ab0GUMyY (ORCPT ); Wed, 21 Jul 2010 08:54:24 -0400 Received: from [77.81.44.130] (snake.embit.ro [77.81.44.130]) by pa-mx-2.embit.ro (Postfix) with ESMTPSA id 7093D1080B9 for ; Wed, 21 Jul 2010 15:54:21 +0300 (EEST) Message-ID: <4C46EDF5.6060102@embit.ro> Date: Wed, 21 Jul 2010 15:54:13 +0300 From: Timofte Bogdan MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Re: [linux-dvb] CAM Support for Terratec Cinergy S2 HD or Technisat SkyStar HD2 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello Try: http://mercurial.intuxication.org/hg/s2-liplianin/summary CI works for me with SkyStar HD 2. On 20.07.2010 12:17, code unknown wrote: > Hi, > > I am using a Terratec Cinergy S2 HD with Mantis driver and so far the > card runs without problems. > > The only thing is that CAM seems not to be supported - it is defined > out from the source code: > > #if 0 > err = mantis_ca_init(mantis); > if (err< 0) { > dprintk(MANTIS_ERROR, 1, "ERROR: Mantis CA initialization > failed<%d>", err); > } > #endif > > > My questions are: > > 1. Is anybody currently working on CAM support? Will it be supported soon? > > 2. Is there another DVB-S2 HD card which has CAM supported? > > > Thanks, > > rinf > > _______________________________________________ > linux-dvb users mailing list > For V4L/DVB development, please use instead linux-media@vger.kernel.org > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >