From: Christian Iversen <chrivers@iversen-net.dk>
To: linux-media@vger.kernel.org
Subject: Re: Unknown CX23885 device
Date: Tue, 27 Jul 2010 22:50:55 +0200 [thread overview]
Message-ID: <4C4F46AF.8040804@iversen-net.dk> (raw)
In-Reply-To: <4C4F3D09.2060405@kernellabs.com>
On 2010-07-27 22:09, Steven Toth wrote:
> On 7/27/10 3:21 PM, Christian Iversen wrote:
>> (please CC, I'm not subscribed yet)
>>
>> Hey Linux-DVB people
>>
>> I'm trying to make an as-of-yet unsupported CX23885 device work in Linux.
>
> http://kernellabs.com/hg/~stoth/cx23885-mpx/
>
> Try this and if necessary module option card=29.
Without card=29, nothing was found. This is with card=29, but still
no /dev/dvb nodes.
[ 6287.278003] ---- 2010-07-27 22:38:24 ----
[ 6288.248799] Linux video capture interface: v2.00
[ 6288.268106] cx23885 driver version 0.0.2 loaded
[ 6288.268273] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6288.268276] cx23885[0]: cx23885_dev_setup() Memory configured for PCIe bridge type 885
[ 6288.268396] CORE cx23885[0]: subsystem: 1461:c139, board: MPX-885 [card=29,insmod option]
[ 6288.268398] cx23885[0]: cx23885_pci_quirks()
[ 6288.268402] cx23885[0]: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
[ 6288.268404] cx23885[0]: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
[ 6288.268405] cx23885[0]: cx23885_reset()
[ 6288.368410] cx23885[0]: cx23885_sram_channel_setup() Configuring channel [VID A]
[ 6288.368421] cx23885[0]: cx23885_sram_channel_setup() Erasing channel [ch2]
[ 6288.368423] cx23885[0]: cx23885_sram_channel_setup() Configuring channel [TS1 B]
[ 6288.368436] cx23885[0]: cx23885_sram_channel_setup() Erasing channel [ch4]
[ 6288.368437] cx23885[0]: cx23885_sram_channel_setup() Erasing channel [ch5]
[ 6288.368439] cx23885[0]: cx23885_sram_channel_setup() Configuring channel [TS2 C]
[ 6288.368452] cx23885[0]: cx23885_sram_channel_setup() Configuring channel [TV Audio]
[ 6288.368467] cx23885[0]: cx23885_sram_channel_setup() Erasing channel [ch8]
[ 6288.368469] cx23885[0]: cx23885_sram_channel_setup() Erasing channel [ch9]
[ 6288.399900] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 6288.404410] cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw
[ 6289.042011] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 6289.054227] cx23885[0]: registered device video0 [v4l2]
[ 6289.054244] cx23885[0]: registered device vbi0
[ 6289.054320] cx23885[0]: registered ALSA audio device
[ 6289.068837] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 6289.068845] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xd7a00000
[ 6289.068855] cx23885 0000:02:00.0: setting latency timer to 64
[ 6289.068859] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
What's the preferred method of pulling the source, btw?
I just downloaded a .tar.gz. It works, but updating is not pleasant :)
--
Med venlig hilsen
Christian Iversen
prev parent reply other threads:[~2010-07-27 20:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-27 19:21 Unknown CX23885 device Christian Iversen
2010-07-27 19:37 ` Alex Deucher
2010-07-27 19:43 ` Christian Iversen
2010-07-27 20:09 ` Steven Toth
2010-07-27 20:50 ` Christian Iversen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C4F46AF.8040804@iversen-net.dk \
--to=chrivers@iversen-net.dk \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox