From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: lirc-list@lists.sourceforge.net,
Jarod Wilson <jarod@wilsonet.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH 4/9] IR: add helper functions for ir input devices that send ir timing data in small chunks, and alternation between pulses and spaces isn't guaranteed.
Date: Wed, 28 Jul 2010 13:09:21 -0300 [thread overview]
Message-ID: <4C505631.7020609@redhat.com> (raw)
In-Reply-To: <1280330051-27732-5-git-send-email-maximlevitsky@gmail.com>
Em 28-07-2010 12:14, Maxim Levitsky escreveu:
Please provide a smaller subject. Feel free to add a more detailed description, but
subjects longer then 74 bytes end by causing some troubles when using git commands.
It would be nice to have a good description on this patch, as it provides a method
for working around troubles found on problematic devices.
> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
> ---
> drivers/media/IR/ir-core-priv.h | 1 +
> drivers/media/IR/ir-keytable.c | 2 +-
> drivers/media/IR/ir-raw-event.c | 86 +++++++++++++++++++++++++++++++++++++++
> include/media/ir-core.h | 24 +++++++++-
> 4 files changed, 109 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
> index 8ce80e4..3eafdb7 100644
> --- a/drivers/media/IR/ir-core-priv.h
> +++ b/drivers/media/IR/ir-core-priv.h
> @@ -36,6 +36,7 @@ struct ir_raw_event_ctrl {
> struct kfifo kfifo; /* fifo for the pulse/space durations */
> ktime_t last_event; /* when last event occurred */
> enum raw_event_type last_type; /* last event type */
> + struct ir_raw_event current_sample; /* sample that is not yet pushed to fifo */
> struct input_dev *input_dev; /* pointer to the parent input_dev */
> u64 enabled_protocols; /* enabled raw protocol decoders */
>
> diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
> index 94a8577..34b9c07 100644
> --- a/drivers/media/IR/ir-keytable.c
> +++ b/drivers/media/IR/ir-keytable.c
> @@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
> */
> int __ir_input_register(struct input_dev *input_dev,
> const struct ir_scancode_table *rc_tab,
> - const struct ir_dev_props *props,
> + struct ir_dev_props *props,
> const char *driver_name)
> {
> struct ir_input_dev *ir_dev;
Hmm... why are you removing "const" from ir_dev_props? This change seems unrelated
with the patch description.
> diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
> index c6a80b3..bdf2ed8 100644
> --- a/drivers/media/IR/ir-raw-event.c
> +++ b/drivers/media/IR/ir-raw-event.c
> @@ -129,6 +129,92 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
> EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
>
> /**
> + * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
> + * @input_dev: the struct input_dev device descriptor
> + * @type: the type of the event that has occurred
> + *
> + * This routine (which may be called from an interrupt context) is used to
> + * store the beginning of an ir pulse or space (or the start/end of ir
> + * reception) for the raw ir decoding state machines.\
> + * This routine is intended for devices with limited internal buffer
> + * It automerges samples of same type, and handles timeouts
> + */
> +int ir_raw_event_store_with_filter(struct input_dev *input_dev,
> + struct ir_raw_event *ev)
> +{
> + struct ir_input_dev *ir = input_get_drvdata(input_dev);
> + struct ir_raw_event_ctrl *raw = ir->raw;
> +
> + if (!ir->raw || !ir->props)
> + return -EINVAL;
> +
> + /* Ignore spaces in idle mode */
> + if (ir->idle && !ev->pulse)
> + return 0;
> + else if (ir->idle)
> + ir_raw_event_set_idle(input_dev, 0);
> +
> + if (!raw->current_sample.duration) {
> + raw->current_sample = *ev;
> + } else if (ev->pulse == raw->current_sample.pulse) {
> + raw->current_sample.duration += ev->duration;
> + } else {
> + ir_raw_event_store(input_dev, &raw->current_sample);
> + raw->current_sample = *ev;
> + }
> +
> + /* Enter idle mode if nessesary */
> + if (!ev->pulse && ir->props->timeout &&
> + raw->current_sample.duration >= ir->props->timeout)
> + ir_raw_event_set_idle(input_dev, 1);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
> +
> +
> +void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
> +{
> + struct ir_input_dev *ir = input_get_drvdata(input_dev);
> + struct ir_raw_event_ctrl *raw = ir->raw;
> + ktime_t now;
> + u64 delta;
> +
> + if (!ir->props)
> + return;
> +
> + if (!ir->raw)
> + goto out;
> +
> + if (idle) {
> + IR_dprintk(2, "enter idle mode\n");
> + raw->last_event = ktime_get();
> + } else {
> + IR_dprintk(2, "exit idle mode\n");
> +
> + now = ktime_get();
> + delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
> +
> + WARN_ON(raw->current_sample.pulse);
> +
> + raw->current_sample.duration =
> + min(raw->current_sample.duration + delta,
> + (u64)IR_MAX_DURATION);
> +
> + ir_raw_event_store(input_dev, &raw->current_sample);
> +
> + if (raw->current_sample.duration == IR_MAX_DURATION)
> + ir_raw_event_reset(input_dev);
> +
> + raw->current_sample.duration = 0;
> + }
> +out:
> + if (ir->props->s_idle)
> + ir->props->s_idle(ir->props->priv, idle);
> + ir->idle = idle;
> +}
> +EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
> +
> +/**
> * ir_raw_event_handle() - schedules the decoding of stored ir data
> * @input_dev: the struct input_dev device descriptor
> *
> diff --git a/include/media/ir-core.h b/include/media/ir-core.h
> index 513e60d..53ce966 100644
> --- a/include/media/ir-core.h
> +++ b/include/media/ir-core.h
> @@ -41,6 +41,9 @@ enum rc_driver_type {
> * anything with it. Yet, as the same keycode table can be used with other
> * devices, a mask is provided to allow its usage. Drivers should generally
> * leave this field in blank
> + * @timeout: optional time after which device stops sending data
> + * @min_timeout: minimum timeout supported by device
> + * @max_timeout: maximum timeout supported by device
> * @priv: driver-specific data, to be used on the callbacks
> * @change_protocol: allow changing the protocol used on hardware decoders
> * @open: callback to allow drivers to enable polling/irq when IR input device
> @@ -50,11 +53,19 @@ enum rc_driver_type {
> * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
> * @s_tx_carrier: set transmit carrier frequency
> * @tx_ir: transmit IR
> + * @s_idle: optional: enable/disable hardware idle mode, upon which,
> + device doesn't interrupt host untill it sees IR data
> */
> struct ir_dev_props {
> enum rc_driver_type driver_type;
> unsigned long allowed_protos;
> u32 scanmask;
> +
> + u64 timeout;
> + u64 min_timeout;
> + u64 max_timeout;
> +
> +
> void *priv;
> int (*change_protocol)(void *priv, u64 ir_type);
> int (*open)(void *priv);
> @@ -62,6 +73,7 @@ struct ir_dev_props {
> int (*s_tx_mask)(void *priv, u32 mask);
> int (*s_tx_carrier)(void *priv, u32 carrier);
> int (*tx_ir)(void *priv, int *txbuf, u32 n);
> + void (*s_idle) (void *priv, int enable);
> };
>
> struct ir_input_dev {
> @@ -69,9 +81,10 @@ struct ir_input_dev {
> char *driver_name; /* Name of the driver module */
> struct ir_scancode_table rc_tab; /* scan/key table */
> unsigned long devno; /* device number */
> - const struct ir_dev_props *props; /* Device properties */
> + struct ir_dev_props *props; /* Device properties */
> struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
> struct input_dev *input_dev; /* the input device associated with this device */
> + int idle;
>
> /* key info - needed by IR keycode handlers */
> spinlock_t keylock; /* protects the below members */
> @@ -95,12 +108,12 @@ enum raw_event_type {
> /* From ir-keytable.c */
> int __ir_input_register(struct input_dev *dev,
> const struct ir_scancode_table *ir_codes,
> - const struct ir_dev_props *props,
> + struct ir_dev_props *props,
> const char *driver_name);
>
> static inline int ir_input_register(struct input_dev *dev,
> const char *map_name,
> - const struct ir_dev_props *props,
> + struct ir_dev_props *props,
> const char *driver_name) {
> struct ir_scancode_table *ir_codes;
> struct ir_input_dev *ir_dev;
> @@ -144,6 +157,11 @@ struct ir_raw_event {
> void ir_raw_event_handle(struct input_dev *input_dev);
> int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
> int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
> +int ir_raw_event_store_with_filter(struct input_dev *input_dev,
> + struct ir_raw_event *ev);
> +
> +void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
> +
> static inline void ir_raw_event_reset(struct input_dev *input_dev)
> {
> struct ir_raw_event ev = { .pulse = false, .duration = 0 };
next prev parent reply other threads:[~2010-07-28 16:09 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-28 15:14 [PATCH 0/9 v1] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-28 15:14 ` [PATCH 1/9] IR: Kconfig fixes Maxim Levitsky
2010-07-28 17:36 ` Randy Dunlap
2010-07-28 20:31 ` Maxim Levitsky
2010-07-28 15:14 ` [PATCH 2/9] IR: minor fixes: Maxim Levitsky
2010-07-28 16:01 ` Mauro Carvalho Chehab
2010-07-28 16:38 ` Maxim Levitsky
2010-07-28 17:59 ` Mauro Carvalho Chehab
2010-07-28 17:23 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 3/9] IR: replace spinlock with mutex Maxim Levitsky
2010-07-28 16:03 ` Mauro Carvalho Chehab
2010-07-28 16:32 ` Maxim Levitsky
2010-07-28 17:43 ` Jarod Wilson
2010-07-28 18:37 ` Mauro Carvalho Chehab
2010-07-28 15:14 ` [PATCH 4/9] IR: add helper functions for ir input devices that send ir timing data in small chunks, and alternation between pulses and spaces isn't guaranteed Maxim Levitsky
2010-07-28 16:09 ` Mauro Carvalho Chehab [this message]
2010-07-28 16:29 ` Maxim Levitsky
2010-07-28 17:46 ` Jarod Wilson
2010-07-28 20:57 ` Jarod Wilson
2010-07-28 21:16 ` Maxim Levitsky
2010-07-28 15:14 ` [PATCH 5/9] IR: extend interfaces to support more device settings Maxim Levitsky
2010-07-28 17:00 ` Mauro Carvalho Chehab
2010-07-28 20:47 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 6/9] IR: actually allow not to compile keymaps in Maxim Levitsky
2010-07-28 17:58 ` Jarod Wilson
2010-07-28 15:14 ` [PATCH 7/9] IR: actualy report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-28 15:14 ` [PATCH 8/9] IR: Add ENE input driver Maxim Levitsky
2010-07-28 17:10 ` Mauro Carvalho Chehab
2010-07-28 17:13 ` Maxim Levitsky
2010-07-28 17:17 ` Jarod Wilson
2010-07-28 18:13 ` Mauro Carvalho Chehab
2010-07-28 15:14 ` [PATCH 9/9] STAGING: remove ENE driver Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C505631.7020609@redhat.com \
--to=mchehab@redhat.com \
--cc=jarod@wilsonet.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lirc-list@lists.sourceforge.net \
--cc=maximlevitsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox