[linux-dvb] dvb-apps testing conditional interface

[linux-dvb] dvb-apps testing conditional interface

[Simon Baxter]

Hi

I'm having a problem with the s2-liplianin drivers (and vdr-1.7.15) and my 
TT-1500/TT-2300 cards.   I've also tried the bundled dvb drivers in Fedora 
13 2.6.32 kernel with the same results.

Problem is, when I tune to any channel in VDR I get 2-3 seconds of live TV 
and then vdr reports the TS thread ended and "SetPlayMode: 0".

When I run vdr-1.6.0 and v4l-dvb drivers, I have no problems.

Can someone please tell me how to test this outside of VDR?  How do I zap 
and receive a channel, which has to go through the CAM?


My CI logs look like this:

SetPlayMode: 1
Slot 2: ==> Date Time (4)
     2: --> 01 01 A0 10 01 90 02 00 04 9F 84 41 07 D8 70 07 24 57 00 02
Slot 2: receive data 1/1
     2: --> 01 01 81 01 01
     2: <-- 01 01 A0 07 01 91 04 00 40 00 41 80 02 01 00
            .  .  .  .  .  .  .  .  @  .  A  .  .  .  .
Slot 2: open session 00400041
Slot 2: new MMI (session id 5)
     2: --> 01 01 A0 0A 01 92 07 00 00 40 00 41 00 05
Slot 2: receive data 1/1
     2: --> 01 01 81 01 01
     2: <-- 01 01 A0 82 00 0B 01 90 02 00 05 9F 88 01 02 01 01 80 02 01 00
            .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Slot 2: <== Display Control (5)
Slot 2: ==> Display Reply (5)
     2: --> 01 01 A0 0B 01 90 02 00 05 9F 88 02 02 01 01
Slot 2: receive data 1/1
     2: --> 01 01 81 01 01
     2: <-- 01 01 A0 82 00 61 01 90 02 00 05 9F 88 0C 58 02 9F 88 03 0B 97
41 6C 70 68 61 43 72 79 70 74 9F 88 03 01 20 9F 88 03 08 50 72 65 73 73 20
4F 4B 9F 88 03 14 59 6F 75 20 61 72 65 20 6E 6F 74 20 65 6E 74 69 74 6C 65
64 9F 88 03 1B 74 6F 20 72 65 63 65 69 76 65 20 74 68 69 73 20 70 72 6F 67
72 61 6D 6D 65 20 21 80 02 01 00
            .  .  .  .  .  a  .  .  .  .  .  .  .  .  X  .  .  .  .  .  .  A
l  p  h  a  C  r  y  p  t  .  .  .  .     .  .  .  .  P  r  e  s  s     O  K
.  .  .  .  Y  o  u     a  r  e     n  o  t     e  n  t  i  t  l  e  d  .  .
.  .  t  o     r  e  c  e  i  v  e     t  h  i  s     p  r  o  g  r  a  m  m
e     !  .  .  .  .
Slot 2: <== Menu Last (5)
Slot 2: <== Text Last (5) 'AlphaCrypt'
Slot 2: <== Text Last (5) ''
Slot 2: <== Text Last (5) 'Press OK'
Slot 2: <== Text Last (5) 'You are not entitled'
Slot 2: <== Text Last (5) 'to receive this programme !'
SetPlayMode: 0


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] dvb-apps testing conditional interface

[Simon Baxter]

> I'm having a problem with the s2-liplianin drivers (and vdr-1.7.15) and my 
> TT-1500/TT-2300 cards.   I've also tried the bundled dvb drivers in Fedora 
> 13 2.6.32 kernel with the same results.


> Can someone please tell me how to test this outside of VDR?  How do I zap 
> and receive a channel, which has to go through the CAM?

Thought it might be an option, but I can't get Kaffeine to work with my 
CI/CAM.

It scans all the channels but won't give a liveTV picture.  All channels are 
scrambled - I thought this worked in Kaffeine now? 

TeVii S470 periodically fails to tune/lock - needs poweroff

[O&M Ugarcina]

Hello Guys,

I have been using my TeVii S470 DVBS2 card for about one month . I am 
using it with mythtv on fedora 12 using latest kernel , and compiled the 
latest v4l drivers . The sensitivity and picture is very good both on 
dvbs and dvbs2 transponders , very happy with that . However several 
times already when trying to watch live tv on myth the channel failed to 
tune . Usually happens in the morning after box was running 24x7 for a 
few days . The only way to restore functionality is to do a power off 
and wait a couple of mins . If I just do a reboot , this does not help . 
Strange thing is that I see nothing in the mythtv logs or dmesg or 
messages log . When the card is in this no-lock state , it will not tune 
into any channel even when I run scandvb . After power off everything 
works again for a few more days . Any info welcome .

Best Regards

Milorad

[linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)

[Hamza Ferrag]

Hi all,

I am trying to install a 'Tevii S470' card  from TeVii technology as 
described  here http://linuxtv.org/wiki/index.php/TeVii_S470.

My configuration is :

- intel x86 platform
- Kernel 2.6.27-21
- tevii_ds3000.tar.gz (firmware archive from 
http://tevii.com/tevii_ds3000.tar.gz ),
- s2-liplianin  mercurial sources ( from 
http://mercurial.intuxication.org/hg/s2-liplianin)last changes at 
05/29/2010,

All work fine i.e drivers/firmware installation after madprobe a right 
modules.

# lsmod
Module                  Size  Used by    Not tainted
cx23885                82416  0
tveeprom                9348  1 cx23885
btcx_risc               1928  1 cx23885
cx2341x                 7748  1 cx23885
ir_common              23936  1 cx23885
videobuf_dma_sg         5060  1 cx23885
ir_core                 3596  2 cx23885,ir_common
v4l2_common             8896  2 cx23885,cx2341x
videodev               25376  2 cx23885,v4l2_common
videobuf_dvb            2820  1 cx23885
videobuf_core           8388  3 cx23885,videobuf_dma_sg,videobuf_dvb
lnbp21                  1024  0
dvb_core               54832  2 cx23885,videobuf_dvb
ds3000                  9668  1


# dmesg
Linux video capture interface: v2.00
cx23885 driver version 0.0.2 loaded
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 
[card=15,autodetected]
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0, mmio: 
0xdf800000
cx23885 0000:03:00.0: setting latency timer to 64
tun: Universal TUN/TAP device driver, 1.6



A problem appear when tunning card using szap-s2 :

# szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh

reading channels from file '/root/channels.conf'
zapping to 1 'MyCh':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff 0.35
vpid 0x0286, apid 0x1fff, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
firmware: requesting dvb-fe-ds3000.fw
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
ds3000_firmware_ondemand: No firmware uploaded (timeout or file not found?)
ds3000_tune: Unable initialise the firmware

Apparently it can't locate a firmware file,  yet :

# ls -l  /lib/firmware/
-rwxr-xr-x    1 root     root         8192 May  3 07:09 dvb-fe-ds3000.fw


Any ideas why this happens?

Thanks and best regards,

Hamza Ferrag


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)

[Hans Houwaard]

I don't really know why, but it happens sometimes on my machine with the 
same card as well. When I have problems, I power off the computer and 
then restart it again. The card will not properly load or function 
untill I do. There is probably some hardware lock that needs to be reset 
by powering off the card.

The loading of the firmware sometimes takes a couple of seconds in my 
machine, it's not very fast. Besides check if the card, which is on a 
PCI-1x slot, doesn't share an IRQ with the onboard soundcard. That will 
seriously effect the performance of both the card and the sound.

Good luck,

Hans

Op 13-07-10 20:28, Hamza Ferrag schreef:
> Hi all,
>
> I am trying to install a 'Tevii S470' card  from TeVii technology as 
> described  here http://linuxtv.org/wiki/index.php/TeVii_S470.
>
> My configuration is :
>
> - intel x86 platform
> - Kernel 2.6.27-21
> - tevii_ds3000.tar.gz (firmware archive from 
> http://tevii.com/tevii_ds3000.tar.gz ),
> - s2-liplianin  mercurial sources ( from 
> http://mercurial.intuxication.org/hg/s2-liplianin)last changes at 
> 05/29/2010,
>
> All work fine i.e drivers/firmware installation after madprobe a right 
> modules.
>
> # lsmod
> Module                  Size  Used by    Not tainted
> cx23885                82416  0
> tveeprom                9348  1 cx23885
> btcx_risc               1928  1 cx23885
> cx2341x                 7748  1 cx23885
> ir_common              23936  1 cx23885
> videobuf_dma_sg         5060  1 cx23885
> ir_core                 3596  2 cx23885,ir_common
> v4l2_common             8896  2 cx23885,cx2341x
> videodev               25376  2 cx23885,v4l2_common
> videobuf_dvb            2820  1 cx23885
> videobuf_core           8388  3 cx23885,videobuf_dma_sg,videobuf_dvb
> lnbp21                  1024  0
> dvb_core               54832  2 cx23885,videobuf_dvb
> ds3000                  9668  1
>
>
> # dmesg
> Linux video capture interface: v2.00
> cx23885 driver version 0.0.2 loaded
> CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 
> [card=15,autodetected]
> cx23885_dvb_register() allocating 1 frontend(s)
> cx23885[0]: cx23885 based dvb card
> DS3000 chip version: 0.192 attached.
> DVB: registering new adapter (cx23885[0])
> DVB: registering adapter 0 frontend 0 (Montage Technology 
> DS3000/TS2020)...
> cx23885_dev_checkrevision() Hardware revision = 0xb0
> cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0, 
> mmio: 0xdf800000
> cx23885 0000:03:00.0: setting latency timer to 64
> tun: Universal TUN/TAP device driver, 1.6
>
>
>
> A problem appear when tunning card using szap-s2 :
>
> # szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
>
> reading channels from file '/root/channels.conf'
> zapping to 1 'MyCh':
> delivery DVB-S2, modulation 8PSK
> sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff 
> 0.35
> vpid 0x0286, apid 0x1fff, sid 0x0000
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> ds3000_firmware_ondemand: Waiting for firmware upload 
> (dvb-fe-ds3000.fw)...
> firmware: requesting dvb-fe-ds3000.fw
> ds3000_firmware_ondemand: Waiting for firmware upload(2)...
> ds3000_firmware_ondemand: No firmware uploaded (timeout or file not 
> found?)
> ds3000_tune: Unable initialise the firmware
>
> Apparently it can't locate a firmware file,  yet :
>
> # ls -l  /lib/firmware/
> -rwxr-xr-x    1 root     root         8192 May  3 07:09 dvb-fe-ds3000.fw
>
>
> Any ideas why this happens?
>
> Thanks and best regards,
>
> Hamza Ferrag
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)

[ferrag hamza]

[-- Attachment #1.1: Type: text/plain, Size: 4027 bytes --]

Hi Hans,



On Tue, Jul 13, 2010 at 8:57 PM, Hans Houwaard <hans@ginder.xs4all.nl>wrote:

> I don't really know why, but it happens sometimes on my machine with the
> same card as well. When I have problems, I power off the computer and then
> restart it again. The card will not properly load or function untill I do.
> There is probably some hardware lock that needs to be reset by powering off
> the card.
>
> The loading of the firmware sometimes takes a couple of seconds in my
> machine, it's not very fast. Besides check if the card, which is on a PCI-1x
> slot, doesn't share an IRQ with the onboard soundcard. That will seriously
> effect the performance of both the card and the sound.
>
> Good luck,
>
> Hans
>
> Op 13-07-10 20:28, Hamza Ferrag schreef:
>
>> Hi all,
>>
>> I am trying to install a 'Tevii S470' card  from TeVii technology as
>> described  here http://linuxtv.org/wiki/index.php/TeVii_S470.
>>
>> My configuration is :
>>
>> - intel x86 platform
>> - Kernel 2.6.27-21
>> - tevii_ds3000.tar.gz (firmware archive from
>> http://tevii.com/tevii_ds3000.tar.gz ),
>> - s2-liplianin  mercurial sources ( from
>> http://mercurial.intuxication.org/hg/s2-liplianin)last<http://mercurial.intuxication.org/hg/s2-liplianin%29last>changes at 05/29/2010,
>>
>> All work fine i.e drivers/firmware installation after madprobe a right
>> modules.
>>
>> # lsmod
>> Module                  Size  Used by    Not tainted
>> cx23885                82416  0
>> tveeprom                9348  1 cx23885
>> btcx_risc               1928  1 cx23885
>> cx2341x                 7748  1 cx23885
>> ir_common              23936  1 cx23885
>> videobuf_dma_sg         5060  1 cx23885
>> ir_core                 3596  2 cx23885,ir_common
>> v4l2_common             8896  2 cx23885,cx2341x
>> videodev               25376  2 cx23885,v4l2_common
>> videobuf_dvb            2820  1 cx23885
>> videobuf_core           8388  3 cx23885,videobuf_dma_sg,videobuf_dvb
>> lnbp21                  1024  0
>> dvb_core               54832  2 cx23885,videobuf_dvb
>> ds3000                  9668  1
>>
>>
>> # dmesg
>> Linux video capture interface: v2.00
>> cx23885 driver version 0.0.2 loaded
>> CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
>> [card=15,autodetected]
>> cx23885_dvb_register() allocating 1 frontend(s)
>> cx23885[0]: cx23885 based dvb card
>> DS3000 chip version: 0.192 attached.
>> DVB: registering new adapter (cx23885[0])
>> DVB: registering adapter 0 frontend 0 (Montage Technology
>> DS3000/TS2020)...
>> cx23885_dev_checkrevision() Hardware revision = 0xb0
>> cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0, mmio:
>> 0xdf800000
>> cx23885 0000:03:00.0: setting latency timer to 64
>> tun: Universal TUN/TAP device driver, 1.6
>>
>>
>>
>> A problem appear when tunning card using szap-s2 :
>>
>> # szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
>>
>> reading channels from file '/root/channels.conf'
>> zapping to 1 'MyCh':
>> delivery DVB-S2, modulation 8PSK
>> sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff
>> 0.35
>> vpid 0x0286, apid 0x1fff, sid 0x0000
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> ds3000_firmware_ondemand: Waiting for firmware upload
>> (dvb-fe-ds3000.fw)...
>> firmware: requesting dvb-fe-ds3000.fw
>> ds3000_firmware_ondemand: Waiting for firmware upload(2)...
>> ds3000_firmware_ondemand: No firmware uploaded (timeout or file not
>> found?)
>> ds3000_tune: Unable initialise the firmware
>>
>> Apparently it can't locate a firmware file,  yet :
>>
>> # ls -l  /lib/firmware/
>> -rwxr-xr-x    1 root     root         8192 May  3 07:09 dvb-fe-ds3000.fw
>>
>>
>> Any ideas why this happens?
>>
>> Thanks and best regards,
>>
>> Hamza Ferrag
>>
>>
>> _______________________________________________
>> linux-dvb users mailing list
>> For V4L/DVB development, please use instead linux-media@vger.kernel.org
>> linux-dvb@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>

[-- Attachment #1.2: Type: text/html, Size: 5091 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)

[ferrag hamza]

[-- Attachment #1.1: Type: text/plain, Size: 4336 bytes --]

Hi Hans,

Thanks for your quick feedback.

Any other suggestions guys ? .


Thanks in advance.

Hamza Ferrag.

On Wed, Jul 14, 2010 at 2:34 PM, ferrag hamza <hferraggreat@gmail.com>wrote:

> Hi Hans,
>
>
>
> On Tue, Jul 13, 2010 at 8:57 PM, Hans Houwaard <hans@ginder.xs4all.nl>wrote:
>
>> I don't really know why, but it happens sometimes on my machine with the
>> same card as well. When I have problems, I power off the computer and then
>> restart it again. The card will not properly load or function untill I do.
>> There is probably some hardware lock that needs to be reset by powering off
>> the card.
>>
>> The loading of the firmware sometimes takes a couple of seconds in my
>> machine, it's not very fast. Besides check if the card, which is on a PCI-1x
>> slot, doesn't share an IRQ with the onboard soundcard. That will seriously
>> effect the performance of both the card and the sound.
>>
>> Good luck,
>>
>> Hans
>>
>> Op 13-07-10 20:28, Hamza Ferrag schreef:
>>
>>> Hi all,
>>>
>>> I am trying to install a 'Tevii S470' card  from TeVii technology as
>>> described  here http://linuxtv.org/wiki/index.php/TeVii_S470.
>>>
>>> My configuration is :
>>>
>>> - intel x86 platform
>>> - Kernel 2.6.27-21
>>> - tevii_ds3000.tar.gz (firmware archive from
>>> http://tevii.com/tevii_ds3000.tar.gz ),
>>> - s2-liplianin  mercurial sources ( from
>>> http://mercurial.intuxication.org/hg/s2-liplianin)last<http://mercurial.intuxication.org/hg/s2-liplianin%29last>changes at 05/29/2010,
>>>
>>> All work fine i.e drivers/firmware installation after madprobe a right
>>> modules.
>>>
>>> # lsmod
>>> Module                  Size  Used by    Not tainted
>>> cx23885                82416  0
>>> tveeprom                9348  1 cx23885
>>> btcx_risc               1928  1 cx23885
>>> cx2341x                 7748  1 cx23885
>>> ir_common              23936  1 cx23885
>>> videobuf_dma_sg         5060  1 cx23885
>>> ir_core                 3596  2 cx23885,ir_common
>>> v4l2_common             8896  2 cx23885,cx2341x
>>> videodev               25376  2 cx23885,v4l2_common
>>> videobuf_dvb            2820  1 cx23885
>>> videobuf_core           8388  3 cx23885,videobuf_dma_sg,videobuf_dvb
>>> lnbp21                  1024  0
>>> dvb_core               54832  2 cx23885,videobuf_dvb
>>> ds3000                  9668  1
>>>
>>>
>>> # dmesg
>>> Linux video capture interface: v2.00
>>> cx23885 driver version 0.0.2 loaded
>>> CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
>>> [card=15,autodetected]
>>> cx23885_dvb_register() allocating 1 frontend(s)
>>> cx23885[0]: cx23885 based dvb card
>>> DS3000 chip version: 0.192 attached.
>>> DVB: registering new adapter (cx23885[0])
>>> DVB: registering adapter 0 frontend 0 (Montage Technology
>>> DS3000/TS2020)...
>>> cx23885_dev_checkrevision() Hardware revision = 0xb0
>>> cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0, mmio:
>>> 0xdf800000
>>> cx23885 0000:03:00.0: setting latency timer to 64
>>> tun: Universal TUN/TAP device driver, 1.6
>>>
>>>
>>>
>>> A problem appear when tunning card using szap-s2 :
>>>
>>> # szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
>>>
>>> reading channels from file '/root/channels.conf'
>>> zapping to 1 'MyCh':
>>> delivery DVB-S2, modulation 8PSK
>>> sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff
>>> 0.35
>>> vpid 0x0286, apid 0x1fff, sid 0x0000
>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> ds3000_firmware_ondemand: Waiting for firmware upload
>>> (dvb-fe-ds3000.fw)...
>>> firmware: requesting dvb-fe-ds3000.fw
>>> ds3000_firmware_ondemand: Waiting for firmware upload(2)...
>>> ds3000_firmware_ondemand: No firmware uploaded (timeout or file not
>>> found?)
>>> ds3000_tune: Unable initialise the firmware
>>>
>>> Apparently it can't locate a firmware file,  yet :
>>>
>>> # ls -l  /lib/firmware/
>>> -rwxr-xr-x    1 root     root         8192 May  3 07:09 dvb-fe-ds3000.fw
>>>
>>>
>>> Any ideas why this happens?
>>>
>>> Thanks and best regards,
>>>
>>> Hamza Ferrag
>>>
>>>
>>> _______________________________________________
>>> linux-dvb users mailing list
>>> For V4L/DVB development, please use instead linux-media@vger.kernel.org
>>> linux-dvb@linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>
>>
>

[-- Attachment #1.2: Type: text/html, Size: 5647 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

TeVii S470 periodically fails to tune/lock - needs poweroff

[O&M Ugarcina]

  Hello Guys,

I have been using my TeVii S470 DVBS2 card for about one month . I am 
using it with mythtv on fedora 12 using latest kernel , and compiled the 
latest v4l drivers . The sensitivity and picture is very good both on 
dvbs and dvbs2 transponders , very happy with that . However several 
times already when trying to watch live tv on myth the channel failed to 
tune . Usually happens in the morning after box was running 24x7 for a 
few days . The only way to restore functionality is to do a power off 
and wait a couple of mins then power on . If I just do a reboot , this 
does not help . Strange thing is that I see nothing unusual in the 
mythtv logs or dmesg/messages log . When the card is in this no-lock 
state , it will not tune into any transponder even when I run scandvb . 
After power reset everything works again for a few more days . Any info 
welcome .


Best Regards

Milorad