From: Antti Palosaari <crope@iki.fi>
To: Paul Gover <pmw.gover@yahoo.co.uk>
Cc: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!"
Date: Wed, 06 Oct 2010 22:41:39 +0300 [thread overview]
Message-ID: <4CACD0F3.6030203@iki.fi> (raw)
In-Reply-To: <201010061456.19573.pmw.gover@yahoo.co.uk>
It is QT1010 tuner driver issue. None is working for that currently or
in near future. Feel free to fix :]
Antti
On 10/06/2010 04:56 PM, Paul Gover wrote:
> I've a cheap USB DVB key that won't work with Kaffeine.
> It identifies itself as KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
> It shows up on Kaffeine's "Configure Television" dialog,
> but scanning for channels finds nothing,
> and tuning using an old channel list gives "Sorry - no available device found"
>
> I had Kaffeine working OK with a different USB TV key.
>
> dvbscan produces "WARNING:>>> tuning failed!!!" messages.
>
> The key works on XP using KWorld's HyperMedia Center.
> Rebooting from there to Linux with warm USB key shows it contains 4.95.0
> firmware.
> At one point, such a warm reboot enabled Kaffeine to show TV.
> That was with one of the early KDE4 Kaffeine candidates,
> and an older linux kernel (sorry, I forget which).
>
> Now using kernel modules in Linux version 2.6.34-gentoo-r6.
> Kaffeine 1.0, KDE 4.4.5. linuxtv-dvb-apps 1.1.1.20080317
> on an ASUS EeePC 1000HE (Intel Atom processor).
>
> Diagnostic stuff
>
> lsusb -v :
>
> Bus 001 Device 023: ID 1b80:e396 Afatech
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1b80 Afatech
> idProduct 0xe396
> bcdDevice 2.00
> iManufacturer 1 Afatech
> iProduct 2 DVB-T 2
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> lsmod :
>
> Module Size Used by
> ppp_deflate 3156 0
> zlib_deflate 17980 1 ppp_deflate
> zlib_inflate 14197 1 ppp_deflate
> bsd_comp 4568 0
> ppp_async 6283 1
> crc_ccitt 1023 1 ppp_async
> ppp_generic 14958 7 ppp_deflate,bsd_comp,ppp_async
> slhc 4431 1 ppp_generic
> sr_mod 10825 0
> cdrom 29800 1 sr_mod
> option 18224 1
> usbserial 24352 4 option
> snd_seq_oss 23625 0
> snd_seq_midi_event 4280 1 snd_seq_oss
> snd_seq 39723 4 snd_seq_oss,snd_seq_midi_event
> snd_seq_device 4109 2 snd_seq_oss,snd_seq
> snd_pcm_oss 30331 0
> snd_mixer_oss 12481 1 snd_pcm_oss
> snd_hda_codec_realtek 187652 1
> qt1010 4461 1
> snd_hda_intel 16732 2
> af9013 17817 1
> snd_hda_codec 42659 2 snd_hda_codec_realtek,snd_hda_intel
> snd_pcm 50564 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
> dvb_usb_af9015 24963 0
> snd_timer 14785 2 snd_seq,snd_pcm
> snd 39369 14
> snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
> dvb_usb 15353 1 dvb_usb_af9015
> dvb_core 72670 1 dvb_usb
> snd_page_alloc 5445 2 snd_hda_intel,snd_pcm
>
> Syslog when connecting cold device (debug level 3) :
>
> usb 1-3: new high speed USB device using ehci_hcd and address 22
> af9015_usb_probe: interface:0
> af9015_eeprom_hash: eeprom sum=37ec4ddf
> af9015_read_config: IR mode:4
> af9015_read_config: TS mode:0
> af9015_read_config: [0] xtal:2 set adc_clock:28000
> af9015_read_config: [0] IF1:36125
> af9015_read_config: [0] MT2060 IF1:5888
> af9015_read_config: [0] tuner id:134
> af9015_identify_state: reply:01
> af9015_download_firmware:
> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state,
> will try to load a firmware
> usb 1-3: firmware: requesting dvb-usb-af9015.fw
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
> af9013: firmware version:4.95.0
> af9015_af9013_frontend_attach: init I2C
> af9015_i2c_init:
> Quantek QT1010 successfully identified.
> input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input12
> dvb-usb: schedule remote query interval to 150 msecs.
> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized
> and connected.
> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
> af9015_tuner_attach:
> af9015_init:
> af9015_init_endpoint: USB speed:3
> af9015_download_ir_table:
>
> and on disconnection:
>
> usb 1-3: USB disconnect, address 22
> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully
> deinitialized and disconnected.
> af9015_usb_device_exit:
> af9015_i2c_exit:
> input device has been disconnected
>
> ls -l /dev/dvb/adapter0/ :
>
> total 0
> crw-rw---- 1 root video 212, 4 Oct 6 12:43 demux0
> crw-rw---- 1 root video 212, 5 Oct 6 12:43 dvr0
> crw-rw---- 1 root video 212, 3 Oct 6 12:43 frontend0
> crw-rw---- 1 root video 212, 7 Oct 6 12:43 net0
>
> dvbscan -uvvt1 /usr/share/dvb/dvb-t/uk-Rowridge :
>
> scanning /usr/share/dvb/dvb-t/uk-Rowridge
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 489833000 0 3 9 1 0 0 0
> initial transponder 530000000 0 2 9 3 0 0 0
> initial transponder 545833000 0 2 9 3 0 0 0
> initial transponder 562167000 0 3 9 1 0 0 0
> initial transponder 513833000 0 3 9 1 0 0 0
> initial transponder 570167000 0 3 9 1 0 0 0
>>>> tune to:
> 489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
> WARNING:>>> tuning failed!!!
>>>> tune to:
> 489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
> (tuning failed)
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
> WARNING:>>> tuning failed!!!
>
> ... repeated for each frequency
>
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> Thanks for any help.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
http://palosaari.fi/
next prev parent reply other threads:[~2010-10-06 19:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-06 13:56 [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!" Paul Gover
2010-10-06 19:41 ` Antti Palosaari [this message]
2010-10-06 20:36 ` dave cunningham
2010-10-06 21:29 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CACD0F3.6030203@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=pmw.gover@yahoo.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox