* [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!"
@ 2010-10-06 13:56 Paul Gover
2010-10-06 19:41 ` Antti Palosaari
0 siblings, 1 reply; 4+ messages in thread
From: Paul Gover @ 2010-10-06 13:56 UTC (permalink / raw)
To: linux-media
I've a cheap USB DVB key that won't work with Kaffeine.
It identifies itself as KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
It shows up on Kaffeine's "Configure Television" dialog,
but scanning for channels finds nothing,
and tuning using an old channel list gives "Sorry - no available device found"
I had Kaffeine working OK with a different USB TV key.
dvbscan produces "WARNING:>>> tuning failed!!!" messages.
The key works on XP using KWorld's HyperMedia Center.
Rebooting from there to Linux with warm USB key shows it contains 4.95.0
firmware.
At one point, such a warm reboot enabled Kaffeine to show TV.
That was with one of the early KDE4 Kaffeine candidates,
and an older linux kernel (sorry, I forget which).
Now using kernel modules in Linux version 2.6.34-gentoo-r6.
Kaffeine 1.0, KDE 4.4.5. linuxtv-dvb-apps 1.1.1.20080317
on an ASUS EeePC 1000HE (Intel Atom processor).
Diagnostic stuff
lsusb -v :
Bus 001 Device 023: ID 1b80:e396 Afatech
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1b80 Afatech
idProduct 0xe396
bcdDevice 2.00
iManufacturer 1 Afatech
iProduct 2 DVB-T 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
lsmod :
Module Size Used by
ppp_deflate 3156 0
zlib_deflate 17980 1 ppp_deflate
zlib_inflate 14197 1 ppp_deflate
bsd_comp 4568 0
ppp_async 6283 1
crc_ccitt 1023 1 ppp_async
ppp_generic 14958 7 ppp_deflate,bsd_comp,ppp_async
slhc 4431 1 ppp_generic
sr_mod 10825 0
cdrom 29800 1 sr_mod
option 18224 1
usbserial 24352 4 option
snd_seq_oss 23625 0
snd_seq_midi_event 4280 1 snd_seq_oss
snd_seq 39723 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 4109 2 snd_seq_oss,snd_seq
snd_pcm_oss 30331 0
snd_mixer_oss 12481 1 snd_pcm_oss
snd_hda_codec_realtek 187652 1
qt1010 4461 1
snd_hda_intel 16732 2
af9013 17817 1
snd_hda_codec 42659 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm 50564 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
dvb_usb_af9015 24963 0
snd_timer 14785 2 snd_seq,snd_pcm
snd 39369 14
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
dvb_usb 15353 1 dvb_usb_af9015
dvb_core 72670 1 dvb_usb
snd_page_alloc 5445 2 snd_hda_intel,snd_pcm
Syslog when connecting cold device (debug level 3) :
usb 1-3: new high speed USB device using ehci_hcd and address 22
af9015_usb_probe: interface:0
af9015_eeprom_hash: eeprom sum=37ec4ddf
af9015_read_config: IR mode:4
af9015_read_config: TS mode:0
af9015_read_config: [0] xtal:2 set adc_clock:28000
af9015_read_config: [0] IF1:36125
af9015_read_config: [0] MT2060 IF1:5888
af9015_read_config: [0] tuner id:134
af9015_identify_state: reply:01
af9015_download_firmware:
dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state,
will try to load a firmware
usb 1-3: firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
af9013: firmware version:4.95.0
af9015_af9013_frontend_attach: init I2C
af9015_i2c_init:
Quantek QT1010 successfully identified.
input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input12
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized
and connected.
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015_tuner_attach:
af9015_init:
af9015_init_endpoint: USB speed:3
af9015_download_ir_table:
and on disconnection:
usb 1-3: USB disconnect, address 22
dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully
deinitialized and disconnected.
af9015_usb_device_exit:
af9015_i2c_exit:
input device has been disconnected
ls -l /dev/dvb/adapter0/ :
total 0
crw-rw---- 1 root video 212, 4 Oct 6 12:43 demux0
crw-rw---- 1 root video 212, 5 Oct 6 12:43 dvr0
crw-rw---- 1 root video 212, 3 Oct 6 12:43 frontend0
crw-rw---- 1 root video 212, 7 Oct 6 12:43 net0
dvbscan -uvvt1 /usr/share/dvb/dvb-t/uk-Rowridge :
scanning /usr/share/dvb/dvb-t/uk-Rowridge
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 489833000 0 3 9 1 0 0 0
initial transponder 530000000 0 2 9 3 0 0 0
initial transponder 545833000 0 2 9 3 0 0 0
initial transponder 562167000 0 3 9 1 0 0 0
initial transponder 513833000 0 3 9 1 0 0 0
initial transponder 570167000 0 3 9 1 0 0 0
>>> tune to:
489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
WARNING: >>> tuning failed!!!
>>> tune to:
489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
(tuning failed)
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
WARNING: >>> tuning failed!!!
... repeated for each frequency
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Thanks for any help.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!"
2010-10-06 13:56 [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!" Paul Gover
@ 2010-10-06 19:41 ` Antti Palosaari
2010-10-06 20:36 ` dave cunningham
0 siblings, 1 reply; 4+ messages in thread
From: Antti Palosaari @ 2010-10-06 19:41 UTC (permalink / raw)
To: Paul Gover; +Cc: linux-media
It is QT1010 tuner driver issue. None is working for that currently or
in near future. Feel free to fix :]
Antti
On 10/06/2010 04:56 PM, Paul Gover wrote:
> I've a cheap USB DVB key that won't work with Kaffeine.
> It identifies itself as KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
> It shows up on Kaffeine's "Configure Television" dialog,
> but scanning for channels finds nothing,
> and tuning using an old channel list gives "Sorry - no available device found"
>
> I had Kaffeine working OK with a different USB TV key.
>
> dvbscan produces "WARNING:>>> tuning failed!!!" messages.
>
> The key works on XP using KWorld's HyperMedia Center.
> Rebooting from there to Linux with warm USB key shows it contains 4.95.0
> firmware.
> At one point, such a warm reboot enabled Kaffeine to show TV.
> That was with one of the early KDE4 Kaffeine candidates,
> and an older linux kernel (sorry, I forget which).
>
> Now using kernel modules in Linux version 2.6.34-gentoo-r6.
> Kaffeine 1.0, KDE 4.4.5. linuxtv-dvb-apps 1.1.1.20080317
> on an ASUS EeePC 1000HE (Intel Atom processor).
>
> Diagnostic stuff
>
> lsusb -v :
>
> Bus 001 Device 023: ID 1b80:e396 Afatech
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1b80 Afatech
> idProduct 0xe396
> bcdDevice 2.00
> iManufacturer 1 Afatech
> iProduct 2 DVB-T 2
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> lsmod :
>
> Module Size Used by
> ppp_deflate 3156 0
> zlib_deflate 17980 1 ppp_deflate
> zlib_inflate 14197 1 ppp_deflate
> bsd_comp 4568 0
> ppp_async 6283 1
> crc_ccitt 1023 1 ppp_async
> ppp_generic 14958 7 ppp_deflate,bsd_comp,ppp_async
> slhc 4431 1 ppp_generic
> sr_mod 10825 0
> cdrom 29800 1 sr_mod
> option 18224 1
> usbserial 24352 4 option
> snd_seq_oss 23625 0
> snd_seq_midi_event 4280 1 snd_seq_oss
> snd_seq 39723 4 snd_seq_oss,snd_seq_midi_event
> snd_seq_device 4109 2 snd_seq_oss,snd_seq
> snd_pcm_oss 30331 0
> snd_mixer_oss 12481 1 snd_pcm_oss
> snd_hda_codec_realtek 187652 1
> qt1010 4461 1
> snd_hda_intel 16732 2
> af9013 17817 1
> snd_hda_codec 42659 2 snd_hda_codec_realtek,snd_hda_intel
> snd_pcm 50564 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
> dvb_usb_af9015 24963 0
> snd_timer 14785 2 snd_seq,snd_pcm
> snd 39369 14
> snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
> dvb_usb 15353 1 dvb_usb_af9015
> dvb_core 72670 1 dvb_usb
> snd_page_alloc 5445 2 snd_hda_intel,snd_pcm
>
> Syslog when connecting cold device (debug level 3) :
>
> usb 1-3: new high speed USB device using ehci_hcd and address 22
> af9015_usb_probe: interface:0
> af9015_eeprom_hash: eeprom sum=37ec4ddf
> af9015_read_config: IR mode:4
> af9015_read_config: TS mode:0
> af9015_read_config: [0] xtal:2 set adc_clock:28000
> af9015_read_config: [0] IF1:36125
> af9015_read_config: [0] MT2060 IF1:5888
> af9015_read_config: [0] tuner id:134
> af9015_identify_state: reply:01
> af9015_download_firmware:
> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state,
> will try to load a firmware
> usb 1-3: firmware: requesting dvb-usb-af9015.fw
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
> af9013: firmware version:4.95.0
> af9015_af9013_frontend_attach: init I2C
> af9015_i2c_init:
> Quantek QT1010 successfully identified.
> input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input12
> dvb-usb: schedule remote query interval to 150 msecs.
> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized
> and connected.
> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
> af9015_tuner_attach:
> af9015_init:
> af9015_init_endpoint: USB speed:3
> af9015_download_ir_table:
>
> and on disconnection:
>
> usb 1-3: USB disconnect, address 22
> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully
> deinitialized and disconnected.
> af9015_usb_device_exit:
> af9015_i2c_exit:
> input device has been disconnected
>
> ls -l /dev/dvb/adapter0/ :
>
> total 0
> crw-rw---- 1 root video 212, 4 Oct 6 12:43 demux0
> crw-rw---- 1 root video 212, 5 Oct 6 12:43 dvr0
> crw-rw---- 1 root video 212, 3 Oct 6 12:43 frontend0
> crw-rw---- 1 root video 212, 7 Oct 6 12:43 net0
>
> dvbscan -uvvt1 /usr/share/dvb/dvb-t/uk-Rowridge :
>
> scanning /usr/share/dvb/dvb-t/uk-Rowridge
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 489833000 0 3 9 1 0 0 0
> initial transponder 530000000 0 2 9 3 0 0 0
> initial transponder 545833000 0 2 9 3 0 0 0
> initial transponder 562167000 0 3 9 1 0 0 0
> initial transponder 513833000 0 3 9 1 0 0 0
> initial transponder 570167000 0 3 9 1 0 0 0
>>>> tune to:
> 489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
> WARNING:>>> tuning failed!!!
>>>> tune to:
> 489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
> (tuning failed)
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
>>>> tuning status == 0x03
> WARNING:>>> tuning failed!!!
>
> ... repeated for each frequency
>
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> Thanks for any help.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!"
2010-10-06 19:41 ` Antti Palosaari
@ 2010-10-06 20:36 ` dave cunningham
2010-10-06 21:29 ` Antti Palosaari
0 siblings, 1 reply; 4+ messages in thread
From: dave cunningham @ 2010-10-06 20:36 UTC (permalink / raw)
To: linux-media
In message <4CACD0F3.6030203@iki.fi>, Antti Palosaari wrote
>It is QT1010 tuner driver issue. None is working for that currently or
>in near future. Feel free to fix :]
>
The wiki appears to show this stick as working.
<http://linuxtv.org/wiki/index.php/Afatech_AF9015>.
Is this information incorrect or is it hit and miss depending on the
host system?
Thanks,
David
>Antti
>
>On 10/06/2010 04:56 PM, Paul Gover wrote:
>> I've a cheap USB DVB key that won't work with Kaffeine.
>> It identifies itself as KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
>> It shows up on Kaffeine's "Configure Television" dialog,
>> but scanning for channels finds nothing,
>> and tuning using an old channel list gives "Sorry - no available
>>device found"
>>
>> I had Kaffeine working OK with a different USB TV key.
>>
>> dvbscan produces "WARNING:>>> tuning failed!!!" messages.
>>
>> The key works on XP using KWorld's HyperMedia Center.
>> Rebooting from there to Linux with warm USB key shows it contains 4.95.0
>> firmware.
>> At one point, such a warm reboot enabled Kaffeine to show TV.
>> That was with one of the early KDE4 Kaffeine candidates,
>> and an older linux kernel (sorry, I forget which).
>>
>> Now using kernel modules in Linux version 2.6.34-gentoo-r6.
>> Kaffeine 1.0, KDE 4.4.5. linuxtv-dvb-apps 1.1.1.20080317
>> on an ASUS EeePC 1000HE (Intel Atom processor).
>>
>> Diagnostic stuff
>>
>> lsusb -v :
>>
>> Bus 001 Device 023: ID 1b80:e396 Afatech
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> idVendor 0x1b80 Afatech
>> idProduct 0xe396
>> bcdDevice 2.00
>> iManufacturer 1 Afatech
>> iProduct 2 DVB-T 2
>> iSerial 0
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 46
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0x80
>> (Bus Powered)
>> MaxPower 500mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 4
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 0
>> bInterfaceProtocol 0
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x02 EP 2 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x84 EP 4 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Device Qualifier (for other device speed):
>> bLength 10
>> bDescriptorType 6
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> bNumConfigurations 1
>> Device Status: 0x0000
>> (Bus Powered)
>>
>> lsmod :
>>
>> Module Size Used by
>> ppp_deflate 3156 0
>> zlib_deflate 17980 1 ppp_deflate
>> zlib_inflate 14197 1 ppp_deflate
>> bsd_comp 4568 0
>> ppp_async 6283 1
>> crc_ccitt 1023 1 ppp_async
>> ppp_generic 14958 7 ppp_deflate,bsd_comp,ppp_async
>> slhc 4431 1 ppp_generic
>> sr_mod 10825 0
>> cdrom 29800 1 sr_mod
>> option 18224 1
>> usbserial 24352 4 option
>> snd_seq_oss 23625 0
>> snd_seq_midi_event 4280 1 snd_seq_oss
>> snd_seq 39723 4 snd_seq_oss,snd_seq_midi_event
>> snd_seq_device 4109 2 snd_seq_oss,snd_seq
>> snd_pcm_oss 30331 0
>> snd_mixer_oss 12481 1 snd_pcm_oss
>> snd_hda_codec_realtek 187652 1
>> qt1010 4461 1
>> snd_hda_intel 16732 2
>> af9013 17817 1
>> snd_hda_codec 42659 2 snd_hda_codec_realtek,snd_hda_intel
>> snd_pcm 50564 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
>> dvb_usb_af9015 24963 0
>> snd_timer 14785 2 snd_seq,snd_pcm
>> snd 39369 14
>>
>>snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_co
>>dec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
>> dvb_usb 15353 1 dvb_usb_af9015
>> dvb_core 72670 1 dvb_usb
>> snd_page_alloc 5445 2 snd_hda_intel,snd_pcm
>>
>> Syslog when connecting cold device (debug level 3) :
>>
>> usb 1-3: new high speed USB device using ehci_hcd and address 22
>> af9015_usb_probe: interface:0
>> af9015_eeprom_hash: eeprom sum=37ec4ddf
>> af9015_read_config: IR mode:4
>> af9015_read_config: TS mode:0
>> af9015_read_config: [0] xtal:2 set adc_clock:28000
>> af9015_read_config: [0] IF1:36125
>> af9015_read_config: [0] MT2060 IF1:5888
>> af9015_read_config: [0] tuner id:134
>> af9015_identify_state: reply:01
>> af9015_download_firmware:
>> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in
>>cold state,
>> will try to load a firmware
>> usb 1-3: firmware: requesting dvb-usb-af9015.fw
>> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
>> dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in
>>warm state.
>> dvb-usb: will pass the complete MPEG2 transport stream to the software
>> demuxer.
>> DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
>> af9013: firmware version:4.95.0
>> af9015_af9013_frontend_attach: init I2C
>> af9015_i2c_init:
>> Quantek QT1010 successfully identified.
>> input: IR-receiver inside an USB DVB receiver as
>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input12
>> dvb-usb: schedule remote query interval to 150 msecs.
>> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully
>>initialized
>> and connected.
>> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
>> af9015_tuner_attach:
>> af9015_init:
>> af9015_init_endpoint: USB speed:3
>> af9015_download_ir_table:
>>
>> and on disconnection:
>>
>> usb 1-3: USB disconnect, address 22
>> dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully
>> deinitialized and disconnected.
>> af9015_usb_device_exit:
>> af9015_i2c_exit:
>> input device has been disconnected
>>
>> ls -l /dev/dvb/adapter0/ :
>>
>> total 0
>> crw-rw---- 1 root video 212, 4 Oct 6 12:43 demux0
>> crw-rw---- 1 root video 212, 5 Oct 6 12:43 dvr0
>> crw-rw---- 1 root video 212, 3 Oct 6 12:43 frontend0
>> crw-rw---- 1 root video 212, 7 Oct 6 12:43 net0
>>
>> dvbscan -uvvt1 /usr/share/dvb/dvb-t/uk-Rowridge :
>>
>> scanning /usr/share/dvb/dvb-t/uk-Rowridge
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> initial transponder 489833000 0 3 9 1 0 0 0
>> initial transponder 530000000 0 2 9 3 0 0 0
>> initial transponder 545833000 0 2 9 3 0 0 0
>> initial transponder 562167000 0 3 9 1 0 0 0
>> initial transponder 513833000 0 3 9 1 0 0 0
>> initial transponder 570167000 0 3 9 1 0 0 0
>>>>> tune to:
>>
>>489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSM
>>ISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>> WARNING:>>> tuning failed!!!
>>>>> tune to:
>>
>>489833000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSM
>>ISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>> (tuning failed)
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>>>>> tuning status == 0x03
>> WARNING:>>> tuning failed!!!
>>
>> ... repeated for each frequency
>>
>> ERROR: initial tuning failed
>> dumping lists (0 services)
>> Done.
>>
>> Thanks for any help.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Dave Cunningham dave at upsilon org uk
PGP KEY ID: 0xA78636DC
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!"
2010-10-06 20:36 ` dave cunningham
@ 2010-10-06 21:29 ` Antti Palosaari
0 siblings, 0 replies; 4+ messages in thread
From: Antti Palosaari @ 2010-10-06 21:29 UTC (permalink / raw)
To: dave cunningham; +Cc: linux-media
On 10/06/2010 11:36 PM, dave cunningham wrote:
> In message <4CACD0F3.6030203@iki.fi>, Antti Palosaari wrote
>
>> It is QT1010 tuner driver issue. None is working for that currently or
>> in near future. Feel free to fix :]
>>
>
> The wiki appears to show this stick as working.
> <http://linuxtv.org/wiki/index.php/Afatech_AF9015>.
>
> Is this information incorrect or is it hit and miss depending on the
> host system?
It "works" but performance is poor. Usually it locks when RF signal is
weak. If you fix bug around line 381 in qt1010.c it will work much
better. But if you fix that it will break devices zl10353+qt1010 since
zl10353 driver misses AGC configuration.
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-10-06 21:29 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-06 13:56 [linux-dvb] [bug] AF9015 message "WARNING: >>> tuning failed!!!" Paul Gover
2010-10-06 19:41 ` Antti Palosaari
2010-10-06 20:36 ` dave cunningham
2010-10-06 21:29 ` Antti Palosaari
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox