Re: rtl2831-r2 still not working for Compro VideoMate U80

[Jan Hoogenraad <jan-conceptronic@hoogenraad.net>]

Could you try:

http://linuxtv.org/hg/~anttip/qt1010/

Previous users of Compro VideoMate U80 has a qt1010 tuner, which 
required that branch.

Ugnius Soraka wrote:
> Hi,
>
> I'd like to get in touch with driver developers, is there any way I
> could help make RTL2831U driver work with Compro VideoMate U80. I would
> like to actively participate. My programming skills are well below
> required to write kernel modules, so I know I would be no use there. But
> anything else, testing with VideoMate U80, sending debug logs, I think I
> could do that.
>
> I've tried http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2 driver, it
> looked promising. U80 device was recognised as VideoMate U90, /dev/dvb
> entries were created. But when scanning it says there's no signal. Debug
> gives TPS_NON_LOCK, Signal NOT Present, rtd2830_soft_reset, etc. (I
> could post message log, if it's any use to somebody).
> U80 has a led which (on windows) shows if TV stick is tuned in and
> working, when scanning on linux it's always on.
>
> I've also tried to compile http://linuxtv.org/hg/~anttip/rtl2831u/ but
> for now it's based on old dvb tree and seems to be incompatible with new
> kernels (mine 2.6.34.7-0.3).
>
> Is anttip driver supposed to be included in kernel, but it looks like
> development is going slow.
>
> Thank you,
> Ugnius
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Jan Hoogenraad
Hoogenraad Interface Services
Postbus 2717
3500 GS Utrecht