From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: linux-media@vger.kernel.org
Subject: Re: [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card
Date: Thu, 14 Oct 2010 14:48:41 -0300 [thread overview]
Message-ID: <4CB74279.1070103@redhat.com> (raw)
In-Reply-To: <201010040135.59454.liplianin@me.by>
Em 03-10-2010 19:35, Igor M. Liplianin escreveu:
> Patches to support for NetUP Dual DVB-T/C-CI RF from NetUP Inc.
> http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF
>
> Features:
>
> PCI-e x1
> Supports two DVB-T/DVB-C transponders simultaneously
> Supports two analog audio/video channels simultaneously
> Independent descrambling of two transponders
> Hardware PID filtering
>
> Components:
>
> Conexant CX23885
> STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
> Xceive XC5000 silicon TV tuner
> Altera FPGA for Common Interafce
>
> The following changes since commit c8dd732fd119ce6d562d5fa82a10bbe75a376575:
>
> V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102 (2010-10-01
> 18:14:35 -0300)
>
> are available in the git repository at:
> http://udev.netup.ru/git/v4l-dvb.git netup-for-media-tree
Hmm... it is not working... perhaps you forgot to run git update-server-info.
The better would be to enable git protocol instead.
>
> Abylay Ospan (6):
> cx23885: Altera FPGA CI interface reworked.
> stv0367: change default value for AGC register.
> stv0367: implement uncorrected blocks counter.
> cx23885, cimax2.c: Fix case of two CAM insertion irq.
> Fix CI code for NetUP Dual DVB-T/C CI RF card
> Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF card
>
> Igor M. Liplianin (14):
> Altera FPGA firmware download module.
> Altera FPGA based CI driver module.
> Support for stv0367 multi-standard demodulator.
> xc5000: add support for DVB-C tuning.
> Initial commit to support NetUP Dual DVB-T/C CI RF card.
> cx23885: implement tuner_bus parameter for cx23885_board structure.
> cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure.
> stv0367: Fix potential divide error
> cx23885: remove duplicate set interrupt mask
> stv0367: coding style corrections
> cx25840: Fix subdev registration and typo in cx25840-core.c
> cx23885: 0xe becomes 0xc again for NetUP Dual DVB-S2
> cx23885: disable MSI for NetUP cards, otherwise CI is not working
> cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter.
>
> drivers/media/common/tuners/xc5000.c | 18 +
> drivers/media/dvb/frontends/Kconfig | 7 +
> drivers/media/dvb/frontends/Makefile | 1 +
> drivers/media/dvb/frontends/stv0367.c | 3419 +++++++++++++++++++++++++
> drivers/media/dvb/frontends/stv0367.h | 62 +
> drivers/media/dvb/frontends/stv0367_priv.h | 211 ++
> drivers/media/dvb/frontends/stv0367_regs.h | 3614 +++++++++++++++++++++++++++
> drivers/media/video/cx23885/Kconfig | 12 +-
> drivers/media/video/cx23885/Makefile | 1 +
> drivers/media/video/cx23885/altera-ci.c | 841 +++++++
> drivers/media/video/cx23885/altera-ci.h | 102 +
> drivers/media/video/cx23885/cimax2.c | 24 +-
> drivers/media/video/cx23885/cx23885-cards.c | 116 +-
> drivers/media/video/cx23885/cx23885-core.c | 35 +-
> drivers/media/video/cx23885/cx23885-dvb.c | 175 ++-
> drivers/media/video/cx23885/cx23885-reg.h | 1 +
> drivers/media/video/cx23885/cx23885-video.c | 7 +-
> drivers/media/video/cx23885/cx23885.h | 7 +-
> drivers/media/video/cx25840/cx25840-core.c | 4 +-
> drivers/misc/Kconfig | 1 +
> drivers/misc/Makefile | 1 +
> drivers/misc/stapl-altera/Kconfig | 8 +
> drivers/misc/stapl-altera/Makefile | 3 +
> drivers/misc/stapl-altera/altera.c | 2739 ++++++++++++++++++++
> drivers/misc/stapl-altera/jbicomp.c | 163 ++
> drivers/misc/stapl-altera/jbiexprt.h | 94 +
> drivers/misc/stapl-altera/jbijtag.c | 1038 ++++++++
> drivers/misc/stapl-altera/jbijtag.h | 83 +
> drivers/misc/stapl-altera/jbistub.c | 70 +
> include/misc/altera.h | 49 +
Hmm... that's new for me... a driver at misc?
> 30 files changed, 12872 insertions(+), 34 deletions(-)
> create mode 100644 drivers/media/dvb/frontends/stv0367.c
> create mode 100644 drivers/media/dvb/frontends/stv0367.h
> create mode 100644 drivers/media/dvb/frontends/stv0367_priv.h
> create mode 100644 drivers/media/dvb/frontends/stv0367_regs.h
> create mode 100644 drivers/media/video/cx23885/altera-ci.c
> create mode 100644 drivers/media/video/cx23885/altera-ci.h
> create mode 100644 drivers/misc/stapl-altera/Kconfig
> create mode 100644 drivers/misc/stapl-altera/Makefile
> create mode 100644 drivers/misc/stapl-altera/altera.c
> create mode 100644 drivers/misc/stapl-altera/jbicomp.c
> create mode 100644 drivers/misc/stapl-altera/jbiexprt.h
> create mode 100644 drivers/misc/stapl-altera/jbijtag.c
> create mode 100644 drivers/misc/stapl-altera/jbijtag.h
> create mode 100644 drivers/misc/stapl-altera/jbistub.c
> create mode 100644 include/misc/altera.h
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-10-14 17:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-03 22:35 [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card Igor M. Liplianin
2010-10-14 17:48 ` Mauro Carvalho Chehab [this message]
2010-10-14 17:54 ` Mauro Carvalho Chehab
2010-10-14 18:58 ` Igor M. Liplianin
2010-10-14 19:04 ` Mauro Carvalho Chehab
2010-10-14 18:11 ` Mauro Carvalho Chehab
2010-10-14 18:59 ` Mauro Carvalho Chehab
2010-10-16 8:07 ` Igor M. Liplianin
-- strict thread matches above, loose matches on Subject: below --
2010-10-11 19:15 Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CB74279.1070103@redhat.com \
--to=mchehab@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox