From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: linux-media@vger.kernel.org, Abylai Ospan <aospan@netup.ru>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card V.2
Date: Sun, 17 Oct 2010 15:59:48 -0200 [thread overview]
Message-ID: <4CBB3994.7060509@redhat.com> (raw)
In-Reply-To: <4CBB37DC.6050507@infradead.org>
Em 17-10-2010 15:52, Mauro Carvalho Chehab escreveu:
> Em 17-10-2010 14:55, Igor M. Liplianin escreveu:
>> Patches to support for NetUP Dual DVB-T/C-CI RF from NetUP Inc.
>> http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF
>>
>> Version 2, Altera FPGA firmware download module reworked.
>>
>> Features:
>>
>> PCI-e x1
>> Supports two DVB-T/DVB-C transponders simultaneously
>> Supports two analog audio/video channels simultaneously
>> Independent descrambling of two transponders
>> Hardware PID filtering
>>
>> Components:
>>
>> Conexant CX23885
>> STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
>> Xceive XC5000 silicon TV tuner
>> Altera FPGA for Common Interafce
>>
>> The following changes since commit 1c8c51f7413ec522c7b729c8ebc5ce815fb7d4a8:
>>
>> V4L/DVB: drivers/media/IR/ene_ir.c: fix NULL dereference (2010-10-17 09:50:42 -0200)
>>
>> are available in the git repository at:
>> http://udev.netup.ru/git/v4l-dvb.git netup-for-media-tree-2
>>
>> Abylay Ospan (6):
>> cx23885: Altera FPGA CI interface reworked.
>> stv0367: change default value for AGC register.
>> stv0367: implement uncorrected blocks counter.
>> cx23885, cimax2.c: Fix case of two CAM insertion irq.
>> Fix CI code for NetUP Dual DVB-T/C CI RF card
>> Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF card
>>
>> Igor M. Liplianin (14):
>> Altera FPGA firmware download module.
>> Altera FPGA based CI driver module.
>> Support for stv0367 multi-standard demodulator.
>> xc5000: add support for DVB-C tuning.
>> Initial commit to support NetUP Dual DVB-T/C CI RF card.
>> cx23885: implement tuner_bus parameter for cx23885_board structure.
>> cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure.
>> stv0367: Fix potential divide error
>> cx23885: remove duplicate set interrupt mask
>> stv0367: coding style corrections
>> cx25840: Fix subdev registration and typo in cx25840-core.c
>> cx23885: 0xe becomes 0xc again for NetUP Dual DVB-S2
>> cx23885: disable MSI for NetUP cards, otherwise CI is not working
>> cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter.
>>
>
>
>> drivers/media/common/tuners/xc5000.c | 18 +
>> drivers/media/dvb/frontends/Kconfig | 7 +
>> drivers/media/dvb/frontends/Makefile | 1 +
>> drivers/media/dvb/frontends/stv0367.c | 3419 +++++++++++++++++++++++++
>> drivers/media/dvb/frontends/stv0367.h | 62 +
>> drivers/media/dvb/frontends/stv0367_priv.h | 211 ++
>> drivers/media/dvb/frontends/stv0367_regs.h | 3614 +++++++++++++++++++++++++++
>> drivers/media/video/cx23885/Kconfig | 12 +-
>> drivers/media/video/cx23885/Makefile | 1 +
>> drivers/media/video/cx23885/altera-ci.c | 841 +++++++
>> drivers/media/video/cx23885/altera-ci.h | 102 +
>> drivers/media/video/cx23885/cimax2.c | 24 +-
>> drivers/media/video/cx23885/cx23885-cards.c | 116 +-
>> drivers/media/video/cx23885/cx23885-core.c | 35 +-
>> drivers/media/video/cx23885/cx23885-dvb.c | 175 ++-
>> drivers/media/video/cx23885/cx23885-reg.h | 1 +
>> drivers/media/video/cx23885/cx23885-video.c | 7 +-
>> drivers/media/video/cx23885/cx23885.h | 7 +-
>> drivers/media/video/cx25840/cx25840-core.c | 4 +-
>> drivers/misc/Kconfig | 1 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/stapl-altera/Kconfig | 8 +
>> drivers/misc/stapl-altera/Makefile | 3 +
>> drivers/misc/stapl-altera/altera.c | 2603 +++++++++++++++++++
>> drivers/misc/stapl-altera/jbicomp.c | 163 ++
>> drivers/misc/stapl-altera/jbiexprt.h | 32 +
>> drivers/misc/stapl-altera/jbijtag.c | 1038 ++++++++
>> drivers/misc/stapl-altera/jbijtag.h | 83 +
>> drivers/misc/stapl-altera/jbistub.c | 70 +
>> include/misc/altera.h | 49 +
>> 30 files changed, 12674 insertions(+), 34 deletions(-)
>> create mode 100644 drivers/media/dvb/frontends/stv0367.c
>> create mode 100644 drivers/media/dvb/frontends/stv0367.h
>> create mode 100644 drivers/media/dvb/frontends/stv0367_priv.h
>> create mode 100644 drivers/media/dvb/frontends/stv0367_regs.h
>> create mode 100644 drivers/media/video/cx23885/altera-ci.c
>> create mode 100644 drivers/media/video/cx23885/altera-ci.h
>> create mode 100644 drivers/misc/stapl-altera/Kconfig
>> create mode 100644 drivers/misc/stapl-altera/Makefile
>> create mode 100644 drivers/misc/stapl-altera/altera.c
>> create mode 100644 drivers/misc/stapl-altera/jbicomp.c
>> create mode 100644 drivers/misc/stapl-altera/jbiexprt.h
>> create mode 100644 drivers/misc/stapl-altera/jbijtag.c
>> create mode 100644 drivers/misc/stapl-altera/jbijtag.h
>> create mode 100644 drivers/misc/stapl-altera/jbistub.c
>> create mode 100644 include/misc/altera.h
>
> There are still a few issues at FPGA patch.
>
In time: I didn't analyse the rest of the series, just the first patch, as they're
likely to have (some) of the problems pointed at fpga. After having this driver fully
fixed, I'll review the other patches. So, feel free to fix issues close to the ones
I've pointed at the other patches as well.
Thanks,
Mauro.
next prev parent reply other threads:[~2010-10-17 17:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-17 16:55 [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card V.2 Igor M. Liplianin
2010-10-17 17:52 ` Mauro Carvalho Chehab
2010-10-17 17:59 ` Mauro Carvalho Chehab [this message]
2010-10-17 20:18 ` Igor M. Liplianin
2010-10-17 20:46 ` Mauro Carvalho Chehab
2010-10-17 21:28 ` Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CBB3994.7060509@redhat.com \
--to=mchehab@redhat.com \
--cc=aospan@netup.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox