* [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules
@ 2010-10-06 8:45 Laurent Pinchart
2010-10-23 0:02 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Laurent Pinchart @ 2010-10-06 8:45 UTC (permalink / raw)
To: linux-media
Cc: Hans Verkuil, Jean Delvare, Guennadi Liakhovetski, Pete Eberlein,
Mike Isely, Eduardo Valentin, Andy Walls, Vaibhav Hiremath,
Muralidharan Karicheri
Hi Mauro,
The following changes since commit c8dd732fd119ce6d562d5fa82a10bbe75a376575:
V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102
(2010-10-01 18:14:35 -0300)
are available in the git repository at:
git://linuxtv.org/pinchartl/uvcvideo.git i2c-module-name
The patches have been posted to the list, and acked for pvrusb2, soc-camera
and sh_vou.
Laurent Pinchart (16):
v4l: Load I2C modules based on modalias
v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
go7007: Fix the TW2804 I2C type name
go7007: Don't use module names to load I2C modules
zoran: Don't use module names to load I2C modules
pvrusb2: Don't use module names to load I2C modules
sh_vou: Don't use module names to load I2C modules
radio-si4713: Don't use module names to load I2C modules
soc_camera: Don't use module names to load I2C modules
vpfe_capture: Don't use module names to load I2C modules
vpif_display: Don't use module names to load I2C modules
vpif_capture: Don't use module names to load I2C modules
ivtv: Don't use module names to load I2C modules
cx18: Don't use module names to load I2C modules
v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
arch/arm/mach-mx3/mach-pcm037.c | 2 -
arch/arm/mach-mx3/mx31moboard-marxbot.c | 1 -
arch/arm/mach-mx3/mx31moboard-smartbot.c | 1 -
arch/arm/mach-pxa/em-x270.c | 1 -
arch/arm/mach-pxa/ezx.c | 2 -
arch/arm/mach-pxa/mioa701.c | 1 -
arch/arm/mach-pxa/pcm990-baseboard.c | 2 -
arch/sh/boards/mach-ap325rxa/setup.c | 1 -
arch/sh/boards/mach-ecovec24/setup.c | 4 --
arch/sh/boards/mach-kfr2r09/setup.c | 1 -
arch/sh/boards/mach-migor/setup.c | 2 -
arch/sh/boards/mach-se/7724/setup.c | 1 -
drivers/media/radio/radio-si4713.c | 2 +-
drivers/media/video/au0828/au0828-cards.c | 4 +-
drivers/media/video/bt8xx/bttv-cards.c | 22 +++++-----
drivers/media/video/cafe_ccic.c | 2 +-
drivers/media/video/cx18/cx18-i2c.c | 23 ++---------
drivers/media/video/cx231xx/cx231xx-cards.c | 4 +-
drivers/media/video/cx23885/cx23885-cards.c | 2 +-
drivers/media/video/cx23885/cx23885-video.c | 4 +-
drivers/media/video/cx88/cx88-cards.c | 9 ++--
drivers/media/video/cx88/cx88-video.c | 7 +--
drivers/media/video/davinci/vpfe_capture.c | 1 -
drivers/media/video/davinci/vpif_capture.c | 1 -
drivers/media/video/davinci/vpif_display.c | 2 +-
drivers/media/video/em28xx/em28xx-cards.c | 18 ++++----
drivers/media/video/fsl-viu.c | 2 +-
drivers/media/video/ivtv/ivtv-i2c.c | 50 +++++--------------------
drivers/media/video/mxb.c | 12 +++---
drivers/media/video/pvrusb2/pvrusb2-hdw.c | 13 +-----
drivers/media/video/saa7134/saa7134-cards.c | 8 ++--
drivers/media/video/saa7134/saa7134-core.c | 4 +-
drivers/media/video/sh_vou.c | 2 +-
drivers/media/video/soc_camera.c | 2 +-
drivers/media/video/usbvision/usbvision-i2c.c | 6 +-
drivers/media/video/v4l2-common.c | 13 ++----
drivers/media/video/vino.c | 4 +-
drivers/media/video/zoran/zoran.h | 2 -
drivers/media/video/zoran/zoran_card.c | 24 +----------
drivers/staging/go7007/go7007-driver.c | 43 +--------------------
drivers/staging/go7007/go7007-usb.c | 2 +-
drivers/staging/go7007/wis-ov7640.c | 1 +
drivers/staging/go7007/wis-saa7113.c | 1 +
drivers/staging/go7007/wis-saa7115.c | 1 +
drivers/staging/go7007/wis-sony-tuner.c | 1 +
drivers/staging/go7007/wis-tw2804.c | 1 +
drivers/staging/go7007/wis-tw9903.c | 1 +
drivers/staging/go7007/wis-uda1342.c | 1 +
drivers/staging/tm6000/tm6000-cards.c | 4 +-
include/media/sh_vou.h | 1 -
include/media/v4l2-common.h | 16 +++-----
51 files changed, 101 insertions(+), 234 deletions(-)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules
2010-10-06 8:45 [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules Laurent Pinchart
@ 2010-10-23 0:02 ` Mauro Carvalho Chehab
2010-10-23 11:27 ` Laurent Pinchart
0 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2010-10-23 0:02 UTC (permalink / raw)
To: Laurent Pinchart
Cc: linux-media, Hans Verkuil, Jean Delvare, Guennadi Liakhovetski,
Pete Eberlein, Mike Isely, Eduardo Valentin, Andy Walls,
Vaibhav Hiremath, Muralidharan Karicheri
Hi Laurent,
Em 06-10-2010 05:45, Laurent Pinchart escreveu:
> Hi Mauro,
>
> The following changes since commit c8dd732fd119ce6d562d5fa82a10bbe75a376575:
>
> V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102
> (2010-10-01 18:14:35 -0300)
>
> are available in the git repository at:
> git://linuxtv.org/pinchartl/uvcvideo.git i2c-module-name
>
> The patches have been posted to the list, and acked for pvrusb2, soc-camera
> and sh_vou.
>
> Laurent Pinchart (16):
> v4l: Load I2C modules based on modalias
> v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
> go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
> go7007: Fix the TW2804 I2C type name
> go7007: Don't use module names to load I2C modules
> zoran: Don't use module names to load I2C modules
> pvrusb2: Don't use module names to load I2C modules
> sh_vou: Don't use module names to load I2C modules
> radio-si4713: Don't use module names to load I2C modules
> soc_camera: Don't use module names to load I2C modules
> vpfe_capture: Don't use module names to load I2C modules
> vpif_display: Don't use module names to load I2C modules
> vpif_capture: Don't use module names to load I2C modules
> ivtv: Don't use module names to load I2C modules
> cx18: Don't use module names to load I2C modules
> v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
To avoid the risk of break something, I've applied all patches from your series, but the
last one. This way, we shouldn't have any regression, and kABI shouldn't break. So, if
someone send a patch late (and there were some new driver additions committed after your
patch), it won't break compilation for the new drivers.
Please rebase the last patch and send it to me again at the end of the -rc1 merge window.
Thanks,
Mauro
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules
2010-10-23 0:02 ` Mauro Carvalho Chehab
@ 2010-10-23 11:27 ` Laurent Pinchart
2010-10-23 13:30 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Laurent Pinchart @ 2010-10-23 11:27 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-media, Hans Verkuil, Jean Delvare, Guennadi Liakhovetski,
Pete Eberlein, Mike Isely, Eduardo Valentin, Andy Walls,
Vaibhav Hiremath, Muralidharan Karicheri
Hi Mauro,
On Saturday 23 October 2010 02:02:01 Mauro Carvalho Chehab wrote:
> Em 06-10-2010 05:45, Laurent Pinchart escreveu:
> > The following changes since commit
c8dd732fd119ce6d562d5fa82a10bbe75a376575:
> > V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of
> > sn9c102 (2010-10-01 18:14:35 -0300)
> >
> > are available in the git repository at:
> > git://linuxtv.org/pinchartl/uvcvideo.git i2c-module-name
> >
> > The patches have been posted to the list, and acked for pvrusb2,
> > soc-camera and sh_vou.
> >
> > Laurent Pinchart (16):
> > v4l: Load I2C modules based on modalias
> > v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
> > go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
> > go7007: Fix the TW2804 I2C type name
> > go7007: Don't use module names to load I2C modules
> > zoran: Don't use module names to load I2C modules
> > pvrusb2: Don't use module names to load I2C modules
> > sh_vou: Don't use module names to load I2C modules
> > radio-si4713: Don't use module names to load I2C modules
> > soc_camera: Don't use module names to load I2C modules
> > vpfe_capture: Don't use module names to load I2C modules
> > vpif_display: Don't use module names to load I2C modules
> > vpif_capture: Don't use module names to load I2C modules
> > ivtv: Don't use module names to load I2C modules
> > cx18: Don't use module names to load I2C modules
> > v4l: Remove module_name argument to the v4l2_i2c_new_subdev*
> > functions
>
> To avoid the risk of break something, I've applied all patches from your
> series, but the last one. This way, we shouldn't have any regression, and
> kABI shouldn't break. So, if someone send a patch late (and there were
> some new driver additions committed after your patch), it won't break
> compilation for the new drivers.
>
> Please rebase the last patch and send it to me again at the end of the -rc1
> merge window.
OK. By end of the -rc1 merge window, do you mean right before it closes or
right after it has closed ? If the former, when will that be ?
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules
2010-10-23 11:27 ` Laurent Pinchart
@ 2010-10-23 13:30 ` Mauro Carvalho Chehab
2010-11-05 2:42 ` Laurent Pinchart
0 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2010-10-23 13:30 UTC (permalink / raw)
To: Laurent Pinchart
Cc: linux-media, Hans Verkuil, Jean Delvare, Guennadi Liakhovetski,
Pete Eberlein, Mike Isely, Eduardo Valentin, Andy Walls,
Vaibhav Hiremath, Muralidharan Karicheri
Em 23-10-2010 09:27, Laurent Pinchart escreveu:
> Hi Mauro,
>
> On Saturday 23 October 2010 02:02:01 Mauro Carvalho Chehab wrote:
>> Em 06-10-2010 05:45, Laurent Pinchart escreveu:
>>> The following changes since commit
> c8dd732fd119ce6d562d5fa82a10bbe75a376575:
>>> V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of
>>> sn9c102 (2010-10-01 18:14:35 -0300)
>>>
>>> are available in the git repository at:
>>> git://linuxtv.org/pinchartl/uvcvideo.git i2c-module-name
>>>
>>> The patches have been posted to the list, and acked for pvrusb2,
>>> soc-camera and sh_vou.
>>>
>>> Laurent Pinchart (16):
>>> v4l: Load I2C modules based on modalias
>>> v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
>>> go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
>>> go7007: Fix the TW2804 I2C type name
>>> go7007: Don't use module names to load I2C modules
>>> zoran: Don't use module names to load I2C modules
>>> pvrusb2: Don't use module names to load I2C modules
>>> sh_vou: Don't use module names to load I2C modules
>>> radio-si4713: Don't use module names to load I2C modules
>>> soc_camera: Don't use module names to load I2C modules
>>> vpfe_capture: Don't use module names to load I2C modules
>>> vpif_display: Don't use module names to load I2C modules
>>> vpif_capture: Don't use module names to load I2C modules
>>> ivtv: Don't use module names to load I2C modules
>>> cx18: Don't use module names to load I2C modules
>>> v4l: Remove module_name argument to the v4l2_i2c_new_subdev*
>>> functions
>>
>> To avoid the risk of break something, I've applied all patches from your
>> series, but the last one. This way, we shouldn't have any regression, and
>> kABI shouldn't break. So, if someone send a patch late (and there were
>> some new driver additions committed after your patch), it won't break
>> compilation for the new drivers.
>>
>> Please rebase the last patch and send it to me again at the end of the -rc1
>> merge window.
>
> OK. By end of the -rc1 merge window, do you mean right before it closes or
> right after it has closed ? If the former, when will that be ?
Right after it closes. Linus will likely close it in the end of the next week.
However, don't expect much maintainers activity during the first week of november,
due to KS/LPC. I'd say that a patch like that should be produced/applied by
Nov, 8 - Nov-14.
Thanks,
Mauro
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules
2010-10-23 13:30 ` Mauro Carvalho Chehab
@ 2010-11-05 2:42 ` Laurent Pinchart
0 siblings, 0 replies; 5+ messages in thread
From: Laurent Pinchart @ 2010-11-05 2:42 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-media, Hans Verkuil, Jean Delvare, Guennadi Liakhovetski,
Pete Eberlein, Mike Isely, Eduardo Valentin, Andy Walls,
Vaibhav Hiremath, Muralidharan Karicheri
Hi Mauro,
On Saturday 23 October 2010 15:30:18 Mauro Carvalho Chehab wrote:
> Em 23-10-2010 09:27, Laurent Pinchart escreveu:
> > On Saturday 23 October 2010 02:02:01 Mauro Carvalho Chehab wrote:
> >> Em 06-10-2010 05:45, Laurent Pinchart escreveu:
> >>> The following changes since commit
> >
> > c8dd732fd119ce6d562d5fa82a10bbe75a376575:
> >>> V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of
> >>> sn9c102 (2010-10-01 18:14:35 -0300)
> >>>
> >>> are available in the git repository at:
> >>> git://linuxtv.org/pinchartl/uvcvideo.git i2c-module-name
> >>>
> >>> The patches have been posted to the list, and acked for pvrusb2,
> >>> soc-camera and sh_vou.
> >>>
> >>> Laurent Pinchart (16):
> >>> v4l: Load I2C modules based on modalias
> >>> v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
> >>> go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
> >>> go7007: Fix the TW2804 I2C type name
> >>> go7007: Don't use module names to load I2C modules
> >>> zoran: Don't use module names to load I2C modules
> >>> pvrusb2: Don't use module names to load I2C modules
> >>> sh_vou: Don't use module names to load I2C modules
> >>> radio-si4713: Don't use module names to load I2C modules
> >>> soc_camera: Don't use module names to load I2C modules
> >>> vpfe_capture: Don't use module names to load I2C modules
> >>> vpif_display: Don't use module names to load I2C modules
> >>> vpif_capture: Don't use module names to load I2C modules
> >>> ivtv: Don't use module names to load I2C modules
> >>> cx18: Don't use module names to load I2C modules
> >>> v4l: Remove module_name argument to the v4l2_i2c_new_subdev*
> >>> functions
> >>
> >> To avoid the risk of break something, I've applied all patches from your
> >> series, but the last one. This way, we shouldn't have any regression,
> >> and kABI shouldn't break. So, if someone send a patch late (and there
> >> were some new driver additions committed after your patch), it won't
> >> break compilation for the new drivers.
> >>
> >> Please rebase the last patch and send it to me again at the end of the
> >> -rc1 merge window.
> >
> > OK. By end of the -rc1 merge window, do you mean right before it closes
> > or right after it has closed ? If the former, when will that be ?
>
> Right after it closes. Linus will likely close it in the end of the next
> week. However, don't expect much maintainers activity during the first
> week of november, due to KS/LPC. I'd say that a patch like that should be
> produced/applied by Nov, 8 - Nov-14.
Now that -rc1 is out, which branch do you want me to generate the patch
against ?
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-11-05 2:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-06 8:45 [GIT PATCHES FOR 2.6.37] Use modaliases to load I2C modules Laurent Pinchart
2010-10-23 0:02 ` Mauro Carvalho Chehab
2010-10-23 11:27 ` Laurent Pinchart
2010-10-23 13:30 ` Mauro Carvalho Chehab
2010-11-05 2:42 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox