* Units error in v4l2-ctl
@ 2010-11-09 18:42 Douglas Peale
0 siblings, 0 replies; only message in thread
From: Douglas Peale @ 2010-11-09 18:42 UTC (permalink / raw)
To: linux-media
I was playing around with V4l2-ctl, and noticed an error in the units displayed.
$ v4l2-ctl -d /dev/video1 --get-tuner
Tuner:
Name : Television
Capabilities : 62.5 kHz stereo lang1 lang2
Frequency range : 0.0 MHz - 268435455.9 MHz
Signal strength/AFC : 0%/0
Current audio mode : mono
Available subchannels: mono
Either the frequency range should be reported in Hz, not MHz, or the decimal place needs to be moved 6 places to the left.
For reference, more info on the specific device.
$ v4l2-ctl -d /dev/video1 --info
Driver Info:
Driver name : cx8800
Card type : ATI HDTV Wonder
Bus info : PCI:0000:07:01.0
Driver version: 8
Capabilities : 0x05010011
Video Capture
VBI Capture
Tuner
Read/Write
Streaming
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-11-09 18:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-09 18:42 Units error in v4l2-ctl Douglas Peale
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).