Re: HVR900H : IR Remote Control

[Massis Sirapian <msirapian@free.fr>]

Le 17/11/2010 20:33, Massis Sirapian a écrit :
>
>>>> load the tm6000 module with the parameter "ir_debug=1". (not the
>>>> tm6000_dvb), and check dmsg after you pressed a button. Have the
>>>> received code the same from the map?
>>>>
>>> I have only
>>> [ 5232.133592] tm5600/60x0 IR (tm6000 #0)/ir: ir->get_key result
>>> data=0000
>>> endlessly, and nothing seems to change when I press a button.
>> can you test a little change in tm6000-input.c. The dprintk line "this
>> line" move to "here", and then testing it.
>>
>> return;
>> }
>>
>> dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); // this
>> line
>>
>> if (ir->key) {
>> // here
>> ir_keydown(ir->rc, poll_result.rc_data, 0);
>> ir->key = 0;
>>
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> I've just tested the new kernel compiled with the modifie tm6000-cards.c
>
> Nothing happens when I press a button :
>
> [ 227.643920] input: tm5600/60x0 IR (tm6000 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0/input7
> [ 227.643965] rc0: tm5600/60x0 IR (tm6000 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0
> [ 227.759492] usbcore: registered new interface driver tm6000
> [ 229.015963] tm6000: open called (dev=video1)
>
> are the last lines of dmesg, and my pressing any button doesn't change
> anything.
>
> Massis
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Hi,

Does it mean that the IR isn't wired in the case of HVR900H ? When you 
said that your Terratec equals the HVR900H, does it imply that if IR 
works on cinergy xe, it should on the HVR900H?

Thank you

Massis