* Re: Hauppauge HVR-2200 analog [not found] ` <1291726869.2073.5.camel@morgan.silverblock.net> @ 2010-12-14 17:23 ` Julian Scheel 2010-12-14 18:41 ` Julian Scheel 2010-12-14 19:51 ` Steven Toth 0 siblings, 2 replies; 10+ messages in thread From: Julian Scheel @ 2010-12-14 17:23 UTC (permalink / raw) To: Andy Walls; +Cc: linux-media Am 07.12.2010 14:01, schrieb Andy Walls: > On Tue, 2010-12-07 at 12:04 +0100, Julian Scheel wrote: >> Hi, >> >> is there any progress on adding analog support to the HVR-2200? >> It seems support for the used chipsets in general is already in the kernel? > It appears to be in the media_tree.git repository on the > staging/for_v2.6.37-rc1 branch: > > http://git.linuxtv.org/media_tree.git?a=tree;f=drivers/media/video/saa7164;h=0acaa4ada45ae6881bfbb19447ae9db43f06ef9b;hb=staging/for_v2.6.37-rc1 > > saa7164-cards.c appears to have analog entries added for HVR-2200's and > saa7164-encoder.c has a number of V4L ioctl()'s for MPEG streams. Is there any reason, why the additional card-information found here: http://www.kernellabs.com/hg/~stoth/saa7164-dev/ is not yet in the kernel tree? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2010-12-14 17:23 ` Hauppauge HVR-2200 analog Julian Scheel @ 2010-12-14 18:41 ` Julian Scheel 2010-12-14 19:51 ` Steven Toth 1 sibling, 0 replies; 10+ messages in thread From: Julian Scheel @ 2010-12-14 18:41 UTC (permalink / raw) To: Andy Walls; +Cc: linux-media Am 14.12.2010 18:23, schrieb Julian Scheel: > Am 07.12.2010 14:01, schrieb Andy Walls: >> It appears to be in the media_tree.git repository on the >> staging/for_v2.6.37-rc1 branch: >> >> http://git.linuxtv.org/media_tree.git?a=tree;f=drivers/media/video/saa7164;h=0acaa4ada45ae6881bfbb19447ae9db43f06ef9b;hb=staging/for_v2.6.37-rc1 >> >> >> saa7164-cards.c appears to have analog entries added for HVR-2200's and >> saa7164-encoder.c has a number of V4L ioctl()'s for MPEG streams. > Is there any reason, why the additional card-information found here: > http://www.kernellabs.com/hg/~stoth/saa7164-dev/ > is not yet in the kernel tree? Actually after manually adding this changeset into linux-26.37-rc5 tree the card is detected and dmesg says: [ 3.653289] saa7164 driver loaded [ 3.653340] saa7164 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.654909] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge WinTV-HVR2200 [card=9,autodetected] [ 3.654914] saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfb000000 [ 3.654919] saa7164 0000:02:00.0: setting latency timer to 64 [ 3.813647] saa7164_downloadfirmware() no first image [ 3.814781] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 3.839841] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 3.839843] saa7164_downloadfirmware() firmware loaded. [ 3.839844] Firmware file header part 1: [ 3.839846] .FirmwareSize = 0x0 [ 3.839847] .BSLSize = 0x0 [ 3.839848] .Reserved = 0x3d538 [ 3.839849] .Version = 0x3 [ 3.839850] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 3.839856] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 3.839857] saa7164_downloadfirmware() BSLSize = 0x0 [ 3.839858] saa7164_downloadfirmware() Reserved = 0x0 [ 3.839860] saa7164_downloadfirmware() Version = 0x1661c00 [ 10.693325] saa7164_downloadimage() Image downloaded, booting... [ 10.797316] saa7164_downloadimage() Image booted successfully. [ 10.797332] starting firmware download(2) [ 13.425188] saa7164_downloadimage() Image downloaded, booting... [ 15.089109] saa7164_downloadimage() Image booted successfully. [ 15.089128] firmware download complete. [ 15.129700] tveeprom 1-0000: Hauppauge model 89619, rev D3F2, serial# 7259796 [ 15.129703] tveeprom 1-0000: MAC address is 00:0d:fe:6e:c6:94 [ 15.129704] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) [ 15.129707] tveeprom 1-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 15.129709] tveeprom 1-0000: audio processor is SAA7164 (idx 43) [ 15.129710] tveeprom 1-0000: decoder processor is SAA7164 (idx 40) [ 15.129711] tveeprom 1-0000: has radio [ 15.129712] saa7164[0]: Hauppauge eeprom: model=89619 [ 15.189491] tda18271 2-0060: creating new instance [ 15.194156] TDA18271HD/C2 detected @ 2-0060 [ 15.446842] DVB: registering new adapter (saa7164) [ 15.446845] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... [ 15.477568] tda18271 3-0060: creating new instance [ 15.482514] TDA18271HD/C2 detected @ 3-0060 [ 15.733973] tda18271: performing RF tracking filter calibration [ 18.082962] tda18271: RF tracking filter calibration complete [ 18.083552] DVB: registering new adapter (saa7164) [ 18.083554] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)... dvb-devices are registered, but no video-devices. Any thoughts? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2010-12-14 17:23 ` Hauppauge HVR-2200 analog Julian Scheel 2010-12-14 18:41 ` Julian Scheel @ 2010-12-14 19:51 ` Steven Toth 2010-12-15 7:04 ` Julian Scheel 2010-12-27 11:48 ` Julian Scheel 1 sibling, 2 replies; 10+ messages in thread From: Steven Toth @ 2010-12-14 19:51 UTC (permalink / raw) To: Julian Scheel; +Cc: Andy Walls, linux-media On 12/14/10 12:23 PM, Julian Scheel wrote: > Is there any reason, why the additional card-information found here: > http://www.kernellabs.com/hg/~stoth/saa7164-dev/ > is not yet in the kernel tree? On my todo list. I validate each board before I add its profile to the core tree. If certain boards are missing then its because that board is considered experimental or is pending testing and merge. PAL encoder support is broken in the current tree and it currently getting my love and attention. Point me at the specific boards you think are missing and I'll also add these to my todo list, they'll likely get merged at the same time. - Steve -- Steven Toth - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2010-12-14 19:51 ` Steven Toth @ 2010-12-15 7:04 ` Julian Scheel 2011-01-04 2:19 ` Julian Scheel 2010-12-27 11:48 ` Julian Scheel 1 sibling, 1 reply; 10+ messages in thread From: Julian Scheel @ 2010-12-15 7:04 UTC (permalink / raw) To: Steven Toth; +Cc: Andy Walls, linux-media Am 14.12.2010 um 20:51 schrieb Steven Toth: > On 12/14/10 12:23 PM, Julian Scheel wrote: >> Is there any reason, why the additional card-information found here: >> http://www.kernellabs.com/hg/~stoth/saa7164-dev/ >> is not yet in the kernel tree? > > On my todo list. Ok, fine. > I validate each board before I add its profile to the core tree. If certain > boards are missing then its because that board is considered experimental or is > pending testing and merge. > > PAL encoder support is broken in the current tree and it currently getting my > love and attention. Point me at the specific boards you think are missing and > I'll also add these to my todo list, they'll likely get merged at the same time. Actually this is the board I am testing with: http://www.kernellabs.com/hg/~stoth/saa7164-dev/rev/cf2d7530d676 Should it work with your testing tree or is the encoder part broken there as well? Julian ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2010-12-15 7:04 ` Julian Scheel @ 2011-01-04 2:19 ` Julian Scheel 2011-01-06 22:31 ` Julian Scheel 0 siblings, 1 reply; 10+ messages in thread From: Julian Scheel @ 2011-01-04 2:19 UTC (permalink / raw) To: Steven Toth, Andy Walls, linux-media [-- Attachment #1: Type: text/plain, Size: 1662 bytes --] Am 15.12.2010 08:04, schrieb Julian Scheel: > Am 14.12.2010 um 20:51 schrieb Steven Toth: > >> On 12/14/10 12:23 PM, Julian Scheel wrote: >>> Is there any reason, why the additional card-information found here: >>> http://www.kernellabs.com/hg/~stoth/saa7164-dev/ >>> is not yet in the kernel tree? >> On my todo list. > Ok, fine. > >> I validate each board before I add its profile to the core tree. If certain >> boards are missing then its because that board is considered experimental or is >> pending testing and merge. >> >> PAL encoder support is broken in the current tree and it currently getting my >> love and attention. Point me at the specific boards you think are missing and >> I'll also add these to my todo list, they'll likely get merged at the same time. > Actually this is the board I am testing with: > http://www.kernellabs.com/hg/~stoth/saa7164-dev/rev/cf2d7530d676 > > Should it work with your testing tree or is the encoder part broken there as well? I was able to get the encoder working now. The diff I referenced did not contain the encoder port settings. I added them manually and now get /dev/video0,1 and /dev/vbi0,1. A simple cat /dev/video0 > test.mpg reveals that the encoder seems to be running - it shows a nice mpeg-encoded bluescreen. Anyway running scantv did not show any results although I have a proper input signal connected. I guess there is something broken still? Any ideas? Also it seems so far only NTSC is supported. dmesg shows that the firmware is capable of PAL - just the question is what needs to be changed in the drivers to switch between the modes? Attached is the diff I currently use. -Julian [-- Attachment #2: saa7164-card.diff --] [-- Type: text/x-patch, Size: 5297 bytes --] diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-cards.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-cards.c 2011-01-04 02:26:56.000000000 +0100 @@ -203,6 +203,66 @@ .i2c_reg_len = REGLEN_8bit, } }, }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { .name = "Hauppauge WinTV-HVR2250", .porta = SAA7164_MPEG_DVB, @@ -426,6 +486,10 @@ .subvendor = 0x0070, .subdevice = 0x8851, .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, }, }; const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); @@ -469,6 +533,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: @@ -549,6 +614,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: Nur in linux-2.6.37-rc8/drivers/media/video/saa7164/: saa7164-cards.c.rej. diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-dvb.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-04 02:23:35.000000000 +0100 @@ -475,6 +475,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: i2c_bus = &dev->i2c_bus[port->nr + 1]; switch (port->nr) { case 0: diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-encoder.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-04 03:05:30.000000000 +0100 @@ -32,7 +32,10 @@ }, { .name = "NTSC-JP", .id = V4L2_STD_NTSC_M_JP, - } + }, { + .name = "PAL-B", + .id = V4L2_STD_PAL_B, + } }; static const u32 saa7164_v4l2_ctrls[] = { diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164.h --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164.h 2011-01-04 02:23:35.000000000 +0100 @@ -83,6 +83,7 @@ #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 #define SAA7164_MAX_UNITS 8 #define SAA7164_TS_NUMBER_OF_LINES 312 Nur in linux-2.6.37-rc8/drivers/media/video/saa7164/: saa7164.mod.c. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2011-01-04 2:19 ` Julian Scheel @ 2011-01-06 22:31 ` Julian Scheel 2011-01-08 15:40 ` Julian Scheel 0 siblings, 1 reply; 10+ messages in thread From: Julian Scheel @ 2011-01-06 22:31 UTC (permalink / raw) To: Steven Toth, Andy Walls, linux-media [-- Attachment #1: Type: text/plain, Size: 292 bytes --] > Attached is the diff I currently use. > Some more process. Attached is a new patch, which allows me to capture video and audio from a PAL tuner. Imho the video has wrong colours though (using PAL-B). Maybe someone would want to test that patch and give some feedback? Regards, Julian [-- Attachment #2: saa7164-card-pal.diff --] [-- Type: text/x-patch, Size: 7720 bytes --] Nur in linux-2.6.37/drivers/media/video/saa7164/: modules.order. diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-api.c linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-api.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c 2011-01-06 23:22:17.000000000 +0100 @@ -548,7 +548,7 @@ tvaudio.std = TU_STANDARD_NTSC_M; tvaudio.country = 1; } else { - tvaudio.std = TU_STANDARD_PAL_I; + tvaudio.std = 0x04; //TU_STANDARD_PAL_I; tvaudio.country = 44; } diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c 2011-01-06 16:16:56.000000000 +0100 @@ -203,6 +203,66 @@ .i2c_reg_len = REGLEN_8bit, } }, }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { .name = "Hauppauge WinTV-HVR2250", .porta = SAA7164_MPEG_DVB, @@ -426,6 +486,10 @@ .subvendor = 0x0070, .subdevice = 0x8851, .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, }, }; const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); @@ -469,6 +533,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: @@ -549,6 +614,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-06 16:16:56.000000000 +0100 @@ -475,6 +475,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: i2c_bus = &dev->i2c_bus[port->nr + 1]; switch (port->nr) { case 0: diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-06 23:09:52.000000000 +0100 @@ -32,7 +32,25 @@ }, { .name = "NTSC-JP", .id = V4L2_STD_NTSC_M_JP, - } + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-B", + .id = V4L2_STD_PAL_B, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + } }; static const u32 saa7164_v4l2_ctrls[] = { diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37/drivers/media/video/saa7164//saa7164.h --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164.h 2011-01-06 23:13:06.000000000 +0100 @@ -83,6 +83,7 @@ #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 #define SAA7164_MAX_UNITS 8 #define SAA7164_TS_NUMBER_OF_LINES 312 @@ -113,7 +114,7 @@ #define DBGLVL_THR 4096 #define DBGLVL_CPU 8192 -#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443) +#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | V4L2_STD_PAL_I | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | V4L2_STD_PAL_B | V4L2_STD_PAL_DK) enum port_t { SAA7164_MPEG_UNDEFINED = 0, diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-vbi.c linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c --- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-vbi.c 2010-12-29 02:05:48.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-06 23:10:04.000000000 +0100 @@ -28,7 +28,25 @@ }, { .name = "NTSC-JP", .id = V4L2_STD_NTSC_M_JP, - } + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-B", + .id = V4L2_STD_PAL_B, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + } }; static const u32 saa7164_v4l2_ctrls[] = { ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2011-01-06 22:31 ` Julian Scheel @ 2011-01-08 15:40 ` Julian Scheel 2011-02-01 13:22 ` Mauro Carvalho Chehab 0 siblings, 1 reply; 10+ messages in thread From: Julian Scheel @ 2011-01-08 15:40 UTC (permalink / raw) To: Steven Toth, Andy Walls, linux-media [-- Attachment #1: Type: text/plain, Size: 533 bytes --] Am 06.01.2011 23:31, schrieb Julian Scheel: > >> Attached is the diff I currently use. >> > Some more process. Attached is a new patch, which allows me to capture > video and audio from a PAL tuner. Imho the video has wrong colours > though (using PAL-B). Maybe someone would want to test that patch and > give some feedback? Ok some hours of debugging later, I figured out that only encoder 1 was not working properly. This was due to a wrong addressing when sending the dif setup commands. The attached new patch fixes this. [-- Attachment #2: saa7164-card-pal.diff --] [-- Type: text/x-patch, Size: 9031 bytes --] Nur in linux-2.6.37/drivers/media/video/saa7164/: modules.order. diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c 2011-01-08 16:10:32.000000000 +0100 @@ -548,7 +548,7 @@ tvaudio.std = TU_STANDARD_NTSC_M; tvaudio.country = 1; } else { - tvaudio.std = TU_STANDARD_PAL_I; + tvaudio.std = 0x04; //TU_STANDARD_PAL_I; tvaudio.country = 44; } @@ -608,7 +608,7 @@ dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__, port->nr, port->type, val); - if (port->nr == 0) + if (port->nr < 3) //== 0) mas = 0xd0; else mas = 0xe0; diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c 2011-01-06 16:16:56.000000000 +0100 @@ -203,6 +203,66 @@ .i2c_reg_len = REGLEN_8bit, } }, }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { .name = "Hauppauge WinTV-HVR2250", .porta = SAA7164_MPEG_DVB, @@ -426,6 +486,10 @@ .subvendor = 0x0070, .subdevice = 0x8851, .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, }, }; const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); @@ -469,6 +533,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: @@ -549,6 +614,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-06 16:16:56.000000000 +0100 @@ -475,6 +475,7 @@ case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: i2c_bus = &dev->i2c_bus[port->nr + 1]; switch (port->nr) { case 0: diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-08 16:11:04.000000000 +0100 @@ -32,7 +32,25 @@ }, { .name = "NTSC-JP", .id = V4L2_STD_NTSC_M_JP, - } + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-B", + .id = V4L2_STD_PAL_B, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + } }; static const u32 saa7164_v4l2_ctrls[] = { @@ -1359,7 +1377,7 @@ .ioctl_ops = &mpeg_ioctl_ops, .minor = -1, .tvnorms = SAA7164_NORMS, - .current_norm = V4L2_STD_NTSC_M, + .current_norm = V4L2_STD_PAL_B, }; static struct video_device *saa7164_encoder_alloc( @@ -1407,7 +1425,7 @@ /* Establish encoder defaults here */ /* Set default TV standard */ - port->encodernorm = saa7164_tvnorms[0]; + port->encodernorm = saa7164_tvnorms[6]; port->width = 720; port->mux_input = 1; /* Composite */ port->video_format = EU_VIDEO_FORMAT_MPEG_2; diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c 2011-01-08 16:13:11.000000000 +0100 @@ -29,6 +29,9 @@ #define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw" #define SAA7164_REV3_FIRMWARE_SIZE 4019072 +//#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3-3.fw" +//#define SAA7164_REV3_FIRMWARE_SIZE 4038864 + struct fw_header { u32 firmwaresize; diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37/drivers/media/video/saa7164//saa7164.h --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164.h 2011-01-06 23:13:06.000000000 +0100 @@ -83,6 +83,7 @@ #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 #define SAA7164_MAX_UNITS 8 #define SAA7164_TS_NUMBER_OF_LINES 312 @@ -113,7 +114,7 @@ #define DBGLVL_THR 4096 #define DBGLVL_CPU 8192 -#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443) +#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | V4L2_STD_PAL_I | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | V4L2_STD_PAL_B | V4L2_STD_PAL_DK) enum port_t { SAA7164_MPEG_UNDEFINED = 0, diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-05 01:50:19.000000000 +0100 +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-08 15:30:50.000000000 +0100 @@ -28,7 +28,25 @@ }, { .name = "NTSC-JP", .id = V4L2_STD_NTSC_M_JP, - } + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-B", + .id = V4L2_STD_PAL_B, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + } }; static const u32 saa7164_v4l2_ctrls[] = { ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2011-01-08 15:40 ` Julian Scheel @ 2011-02-01 13:22 ` Mauro Carvalho Chehab 2011-02-25 7:38 ` Julian Scheel 0 siblings, 1 reply; 10+ messages in thread From: Mauro Carvalho Chehab @ 2011-02-01 13:22 UTC (permalink / raw) To: Julian Scheel; +Cc: Steven Toth, Andy Walls, linux-media Em 08-01-2011 13:40, Julian Scheel escreveu: > Am 06.01.2011 23:31, schrieb Julian Scheel: >> >>> Attached is the diff I currently use. >>> >> Some more process. Attached is a new patch, which allows me to capture video and audio from a PAL tuner. Imho the video has wrong colours though (using PAL-B). Maybe someone would want to test that patch and give some feedback? > Ok some hours of debugging later, I figured out that only encoder 1 was not working properly. This was due to a wrong addressing when sending the dif setup commands. The attached new patch fixes this. > Is this patch already working properly? If so, please: 1) Check its codingstyle with ./scripts/checkpatch.pl (there are some issues there, like commenting with //) 2) Remove the dead code; 3) Provide a patch description and your Signed-off-by: > > saa7164-card-pal.diff > > > Nur in linux-2.6.37/drivers/media/video/saa7164/: modules.order. > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c 2011-01-08 16:10:32.000000000 +0100 > @@ -548,7 +548,7 @@ > tvaudio.std = TU_STANDARD_NTSC_M; > tvaudio.country = 1; > } else { > - tvaudio.std = TU_STANDARD_PAL_I; > + tvaudio.std = 0x04; //TU_STANDARD_PAL_I; Probably, you need to add a define for 0x04 and use its symbol here. > tvaudio.country = 44; > } > > @@ -608,7 +608,7 @@ > dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__, > port->nr, port->type, val); > > - if (port->nr == 0) > + if (port->nr < 3) //== 0) > mas = 0xd0; > else > mas = 0xe0; > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c 2011-01-06 16:16:56.000000000 +0100 > @@ -203,6 +203,66 @@ > .i2c_reg_len = REGLEN_8bit, > } }, > }, > + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { > + .name = "Hauppauge WinTV-HVR2200", > + .porta = SAA7164_MPEG_DVB, > + .portb = SAA7164_MPEG_DVB, > + .portc = SAA7164_MPEG_ENCODER, > + .portd = SAA7164_MPEG_ENCODER, > + .porte = SAA7164_MPEG_VBI, > + .portf = SAA7164_MPEG_VBI, > + .chiprev = SAA7164_CHIP_REV3, > + .unit = {{ > + .id = 0x1d, > + .type = SAA7164_UNIT_EEPROM, > + .name = "4K EEPROM", > + .i2c_bus_nr = SAA7164_I2C_BUS_0, > + .i2c_bus_addr = 0xa0 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x04, > + .type = SAA7164_UNIT_TUNER, > + .name = "TDA18271-1", > + .i2c_bus_nr = SAA7164_I2C_BUS_1, > + .i2c_bus_addr = 0xc0 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x05, > + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, > + .name = "TDA8290-1", > + .i2c_bus_nr = SAA7164_I2C_BUS_1, > + .i2c_bus_addr = 0x84 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x1b, > + .type = SAA7164_UNIT_TUNER, > + .name = "TDA18271-2", > + .i2c_bus_nr = SAA7164_I2C_BUS_2, > + .i2c_bus_addr = 0xc0 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x1c, > + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, > + .name = "TDA8290-2", > + .i2c_bus_nr = SAA7164_I2C_BUS_2, > + .i2c_bus_addr = 0x84 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x1e, > + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, > + .name = "TDA10048-1", > + .i2c_bus_nr = SAA7164_I2C_BUS_1, > + .i2c_bus_addr = 0x10 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + }, { > + .id = 0x1f, > + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, > + .name = "TDA10048-2", > + .i2c_bus_nr = SAA7164_I2C_BUS_2, > + .i2c_bus_addr = 0x12 >> 1, > + .i2c_reg_len = REGLEN_8bit, > + } }, > + }, > [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { > .name = "Hauppauge WinTV-HVR2250", > .porta = SAA7164_MPEG_DVB, > @@ -426,6 +486,10 @@ > .subvendor = 0x0070, > .subdevice = 0x8851, > .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, > + }, { > + .subvendor = 0x0070, > + .subdevice = 0x8940, > + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, > }, > }; > const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); > @@ -469,6 +533,7 @@ > case SAA7164_BOARD_HAUPPAUGE_HVR2200: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: > + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: > case SAA7164_BOARD_HAUPPAUGE_HVR2250: > case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: > case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: > @@ -549,6 +614,7 @@ > case SAA7164_BOARD_HAUPPAUGE_HVR2200: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: > + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: > case SAA7164_BOARD_HAUPPAUGE_HVR2250: > case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: > case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-06 16:16:56.000000000 +0100 > @@ -475,6 +475,7 @@ > case SAA7164_BOARD_HAUPPAUGE_HVR2200: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: > case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: > + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: > i2c_bus = &dev->i2c_bus[port->nr + 1]; > switch (port->nr) { > case 0: > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-08 16:11:04.000000000 +0100 > @@ -32,7 +32,25 @@ > }, { > .name = "NTSC-JP", > .id = V4L2_STD_NTSC_M_JP, > - } > + }, { > + .name = "PAL-I", > + .id = V4L2_STD_PAL_I, > + }, { > + .name = "PAL-M", > + .id = V4L2_STD_PAL_M, > + }, { > + .name = "PAL-N", > + .id = V4L2_STD_PAL_N, > + }, { > + .name = "PAL-Nc", > + .id = V4L2_STD_PAL_Nc, > + }, { > + .name = "PAL-B", > + .id = V4L2_STD_PAL_B, > + }, { > + .name = "PAL-DK", > + .id = V4L2_STD_PAL_DK, > + } > }; > > static const u32 saa7164_v4l2_ctrls[] = { > @@ -1359,7 +1377,7 @@ > .ioctl_ops = &mpeg_ioctl_ops, > .minor = -1, > .tvnorms = SAA7164_NORMS, > - .current_norm = V4L2_STD_NTSC_M, > + .current_norm = V4L2_STD_PAL_B, > }; > > static struct video_device *saa7164_encoder_alloc( > @@ -1407,7 +1425,7 @@ > > /* Establish encoder defaults here */ > /* Set default TV standard */ > - port->encodernorm = saa7164_tvnorms[0]; > + port->encodernorm = saa7164_tvnorms[6]; > port->width = 720; > port->mux_input = 1; /* Composite */ > port->video_format = EU_VIDEO_FORMAT_MPEG_2; > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c 2011-01-08 16:13:11.000000000 +0100 > @@ -29,6 +29,9 @@ > > #define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw" > #define SAA7164_REV3_FIRMWARE_SIZE 4019072 > +//#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3-3.fw" > +//#define SAA7164_REV3_FIRMWARE_SIZE 4038864 > + Hmm... the above seems weird for me. > > struct fw_header { > u32 firmwaresize; > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37/drivers/media/video/saa7164//saa7164.h > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164.h 2011-01-06 23:13:06.000000000 +0100 > @@ -83,6 +83,7 @@ > #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 > #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 > #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 > +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 > > #define SAA7164_MAX_UNITS 8 > #define SAA7164_TS_NUMBER_OF_LINES 312 > @@ -113,7 +114,7 @@ > #define DBGLVL_THR 4096 > #define DBGLVL_CPU 8192 > > -#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443) > +#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | V4L2_STD_PAL_I | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | V4L2_STD_PAL_B | V4L2_STD_PAL_DK) You may eventually simplify the above with things like V4L_STD_MN (that covers NTSC/PAL_M/PAL_N and some variants). See videodev2.h for the macros that group video standards. > > enum port_t { > SAA7164_MPEG_UNDEFINED = 0, > diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c > --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-05 01:50:19.000000000 +0100 > +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-08 15:30:50.000000000 +0100 > @@ -28,7 +28,25 @@ > }, { > .name = "NTSC-JP", > .id = V4L2_STD_NTSC_M_JP, > - } > + }, { > + .name = "PAL-I", > + .id = V4L2_STD_PAL_I, > + }, { > + .name = "PAL-M", > + .id = V4L2_STD_PAL_M, > + }, { > + .name = "PAL-N", > + .id = V4L2_STD_PAL_N, > + }, { > + .name = "PAL-Nc", > + .id = V4L2_STD_PAL_Nc, > + }, { > + .name = "PAL-B", > + .id = V4L2_STD_PAL_B, > + }, { > + .name = "PAL-DK", > + .id = V4L2_STD_PAL_DK, > + } > }; > > static const u32 saa7164_v4l2_ctrls[] = { ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2011-02-01 13:22 ` Mauro Carvalho Chehab @ 2011-02-25 7:38 ` Julian Scheel 0 siblings, 0 replies; 10+ messages in thread From: Julian Scheel @ 2011-02-25 7:38 UTC (permalink / raw) To: Mauro Carvalho Chehab; +Cc: Steven Toth, Andy Walls, linux-media Am 01.02.2011 14:22, schrieb Mauro Carvalho Chehab: > Em 08-01-2011 13:40, Julian Scheel escreveu: >> Am 06.01.2011 23:31, schrieb Julian Scheel: >>>> Attached is the diff I currently use. >>>> >>> Some more process. Attached is a new patch, which allows me to capture video and audio from a PAL tuner. Imho the video has wrong colours though (using PAL-B). Maybe someone would want to test that patch and give some feedback? >> Ok some hours of debugging later, I figured out that only encoder 1 was not working properly. This was due to a wrong addressing when sending the dif setup commands. The attached new patch fixes this. >> > Is this patch already working properly? > > If so, please: > 1) Check its codingstyle with ./scripts/checkpatch.pl > (there are some issues there, like commenting with //) > 2) Remove the dead code; > 3) Provide a patch description and your Signed-off-by: > For my purpose it works well, but actually I guess some more modifications would be needed for other PAL regions. Actually Steven wanted to take a look at this patch and merge it. What do you think, Steven? >> saa7164-card-pal.diff >> >> >> Nur in linux-2.6.37/drivers/media/video/saa7164/: modules.order. >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-api.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-api.c 2011-01-08 16:10:32.000000000 +0100 >> @@ -548,7 +548,7 @@ >> tvaudio.std = TU_STANDARD_NTSC_M; >> tvaudio.country = 1; >> } else { >> - tvaudio.std = TU_STANDARD_PAL_I; >> + tvaudio.std = 0x04; //TU_STANDARD_PAL_I; > Probably, you need to add a define for 0x04 and use its symbol here. > As I have no specification for the card/firmware it's a bit hard to insert a define here, as I can not say for sure for which standards it would properly work. Again this is something Steven would have to take a look at, I think. >> tvaudio.country = 44; >> } >> >> @@ -608,7 +608,7 @@ >> dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__, >> port->nr, port->type, val); >> >> - if (port->nr == 0) >> + if (port->nr< 3) //== 0) >> mas = 0xd0; >> else >> mas = 0xe0; >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-cards.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-cards.c 2011-01-06 16:16:56.000000000 +0100 >> @@ -203,6 +203,66 @@ >> .i2c_reg_len = REGLEN_8bit, >> } }, >> }, >> + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { >> + .name = "Hauppauge WinTV-HVR2200", >> + .porta = SAA7164_MPEG_DVB, >> + .portb = SAA7164_MPEG_DVB, >> + .portc = SAA7164_MPEG_ENCODER, >> + .portd = SAA7164_MPEG_ENCODER, >> + .porte = SAA7164_MPEG_VBI, >> + .portf = SAA7164_MPEG_VBI, >> + .chiprev = SAA7164_CHIP_REV3, >> + .unit = {{ >> + .id = 0x1d, >> + .type = SAA7164_UNIT_EEPROM, >> + .name = "4K EEPROM", >> + .i2c_bus_nr = SAA7164_I2C_BUS_0, >> + .i2c_bus_addr = 0xa0>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x04, >> + .type = SAA7164_UNIT_TUNER, >> + .name = "TDA18271-1", >> + .i2c_bus_nr = SAA7164_I2C_BUS_1, >> + .i2c_bus_addr = 0xc0>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x05, >> + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, >> + .name = "TDA8290-1", >> + .i2c_bus_nr = SAA7164_I2C_BUS_1, >> + .i2c_bus_addr = 0x84>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x1b, >> + .type = SAA7164_UNIT_TUNER, >> + .name = "TDA18271-2", >> + .i2c_bus_nr = SAA7164_I2C_BUS_2, >> + .i2c_bus_addr = 0xc0>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x1c, >> + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, >> + .name = "TDA8290-2", >> + .i2c_bus_nr = SAA7164_I2C_BUS_2, >> + .i2c_bus_addr = 0x84>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x1e, >> + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, >> + .name = "TDA10048-1", >> + .i2c_bus_nr = SAA7164_I2C_BUS_1, >> + .i2c_bus_addr = 0x10>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + }, { >> + .id = 0x1f, >> + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, >> + .name = "TDA10048-2", >> + .i2c_bus_nr = SAA7164_I2C_BUS_2, >> + .i2c_bus_addr = 0x12>> 1, >> + .i2c_reg_len = REGLEN_8bit, >> + } }, >> + }, >> [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { >> .name = "Hauppauge WinTV-HVR2250", >> .porta = SAA7164_MPEG_DVB, >> @@ -426,6 +486,10 @@ >> .subvendor = 0x0070, >> .subdevice = 0x8851, >> .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, >> + }, { >> + .subvendor = 0x0070, >> + .subdevice = 0x8940, >> + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, >> }, >> }; >> const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); >> @@ -469,6 +533,7 @@ >> case SAA7164_BOARD_HAUPPAUGE_HVR2200: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: >> + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: >> @@ -549,6 +614,7 @@ >> case SAA7164_BOARD_HAUPPAUGE_HVR2200: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: >> + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: >> case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-dvb.c 2011-01-06 16:16:56.000000000 +0100 >> @@ -475,6 +475,7 @@ >> case SAA7164_BOARD_HAUPPAUGE_HVR2200: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: >> case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: >> + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: >> i2c_bus =&dev->i2c_bus[port->nr + 1]; >> switch (port->nr) { >> case 0: >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-encoder.c 2011-01-08 16:11:04.000000000 +0100 >> @@ -32,7 +32,25 @@ >> }, { >> .name = "NTSC-JP", >> .id = V4L2_STD_NTSC_M_JP, >> - } >> + }, { >> + .name = "PAL-I", >> + .id = V4L2_STD_PAL_I, >> + }, { >> + .name = "PAL-M", >> + .id = V4L2_STD_PAL_M, >> + }, { >> + .name = "PAL-N", >> + .id = V4L2_STD_PAL_N, >> + }, { >> + .name = "PAL-Nc", >> + .id = V4L2_STD_PAL_Nc, >> + }, { >> + .name = "PAL-B", >> + .id = V4L2_STD_PAL_B, >> + }, { >> + .name = "PAL-DK", >> + .id = V4L2_STD_PAL_DK, >> + } >> }; >> >> static const u32 saa7164_v4l2_ctrls[] = { >> @@ -1359,7 +1377,7 @@ >> .ioctl_ops =&mpeg_ioctl_ops, >> .minor = -1, >> .tvnorms = SAA7164_NORMS, >> - .current_norm = V4L2_STD_NTSC_M, >> + .current_norm = V4L2_STD_PAL_B, >> }; >> >> static struct video_device *saa7164_encoder_alloc( >> @@ -1407,7 +1425,7 @@ >> >> /* Establish encoder defaults here */ >> /* Set default TV standard */ >> - port->encodernorm = saa7164_tvnorms[0]; >> + port->encodernorm = saa7164_tvnorms[6]; >> port->width = 720; >> port->mux_input = 1; /* Composite */ >> port->video_format = EU_VIDEO_FORMAT_MPEG_2; >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-fw.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-fw.c 2011-01-08 16:13:11.000000000 +0100 >> @@ -29,6 +29,9 @@ >> >> #define SAA7164_REV3_FIRMWARE "NXP7164-2010-03-10.1.fw" >> #define SAA7164_REV3_FIRMWARE_SIZE 4019072 >> +//#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3-3.fw" >> +//#define SAA7164_REV3_FIRMWARE_SIZE 4038864 >> + > Hmm... the above seems weird for me. Yep, missed that when cleaning up the code, can be removed. >> >> struct fw_header { >> u32 firmwaresize; >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37/drivers/media/video/saa7164//saa7164.h >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164.h 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164.h 2011-01-06 23:13:06.000000000 +0100 >> @@ -83,6 +83,7 @@ >> #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 >> #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 >> #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8 >> +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9 >> >> #define SAA7164_MAX_UNITS 8 >> #define SAA7164_TS_NUMBER_OF_LINES 312 >> @@ -113,7 +114,7 @@ >> #define DBGLVL_THR 4096 >> #define DBGLVL_CPU 8192 >> >> -#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443) >> +#define SAA7164_NORMS (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | V4L2_STD_PAL_I | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | V4L2_STD_PAL_B | V4L2_STD_PAL_DK) > You may eventually simplify the above with things like > V4L_STD_MN (that covers NTSC/PAL_M/PAL_N and some variants). See videodev2.h > for the macros that group video standards. Ok, makes sense. I just followed the existing code scheme. >> >> enum port_t { >> SAA7164_MPEG_UNDEFINED = 0, >> diff -x '*.o' -x '*.ko' -x '*.cmd' -x '*.mod.*' -ru linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c >> --- linux-2.6.37.a/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-05 01:50:19.000000000 +0100 >> +++ linux-2.6.37/drivers/media/video/saa7164//saa7164-vbi.c 2011-01-08 15:30:50.000000000 +0100 >> @@ -28,7 +28,25 @@ >> }, { >> .name = "NTSC-JP", >> .id = V4L2_STD_NTSC_M_JP, >> - } >> + }, { >> + .name = "PAL-I", >> + .id = V4L2_STD_PAL_I, >> + }, { >> + .name = "PAL-M", >> + .id = V4L2_STD_PAL_M, >> + }, { >> + .name = "PAL-N", >> + .id = V4L2_STD_PAL_N, >> + }, { >> + .name = "PAL-Nc", >> + .id = V4L2_STD_PAL_Nc, >> + }, { >> + .name = "PAL-B", >> + .id = V4L2_STD_PAL_B, >> + }, { >> + .name = "PAL-DK", >> + .id = V4L2_STD_PAL_DK, >> + } >> }; >> >> static const u32 saa7164_v4l2_ctrls[] = { > -Julian ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Hauppauge HVR-2200 analog 2010-12-14 19:51 ` Steven Toth 2010-12-15 7:04 ` Julian Scheel @ 2010-12-27 11:48 ` Julian Scheel 1 sibling, 0 replies; 10+ messages in thread From: Julian Scheel @ 2010-12-27 11:48 UTC (permalink / raw) To: Steven Toth; +Cc: Andy Walls, linux-media Hi Steve, Am 14.12.2010 20:51, schrieb Steven Toth: > On 12/14/10 12:23 PM, Julian Scheel wrote: >> Is there any reason, why the additional card-information found here: >> http://www.kernellabs.com/hg/~stoth/saa7164-dev/ >> is not yet in the kernel tree? > PAL encoder support is broken in the current tree and it currently getting my > love and attention. Point me at the specific boards you think are missing and > I'll also add these to my todo list, they'll likely get merged at the same time Any progress on this? If you need any assistance please let me know. Regards, Julian ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-02-25 7:53 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4CFE14A1.3040801@jusst.de>
[not found] ` <1291726869.2073.5.camel@morgan.silverblock.net>
2010-12-14 17:23 ` Hauppauge HVR-2200 analog Julian Scheel
2010-12-14 18:41 ` Julian Scheel
2010-12-14 19:51 ` Steven Toth
2010-12-15 7:04 ` Julian Scheel
2011-01-04 2:19 ` Julian Scheel
2011-01-06 22:31 ` Julian Scheel
2011-01-08 15:40 ` Julian Scheel
2011-02-01 13:22 ` Mauro Carvalho Chehab
2011-02-25 7:38 ` Julian Scheel
2010-12-27 11:48 ` Julian Scheel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).