[    1.954715] cx231xx v4l2 driver loaded.
[    1.954741] usbcore: registered new interface driver cx231xx
[    2.171811] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    2.291875] usb 1-2: New USB device found, idVendor=2040, idProduct=c200
[    2.293621] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.297065] usb 1-2: Product: Hauppauge Device
[    2.298805] usb 1-2: Manufacturer: Hauppauge
[    2.298807] usb 1-2: SerialNumber: 0013566174
[    2.305647] cx231xx #0: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 5 interfaces
[    2.307548] cx231xx #0: registering interface 1
[    2.309498] cx231xx #0: can't change interface 3 alt no. to 3: Max. Pkt size = 0
[    2.311374] cx231xx #0: can't change interface 4 alt no. to 1: Max. Pkt size = 0
[    2.313248] cx231xx #0: Identified as Hauppauge USB Live 2 (card=9)
[    2.337247] cx231xx #0: UsbInterface::sendCommand, failed with status --32
[    2.339250] cx231xx #0: UsbInterface::sendCommand, failed with status --32
[    2.342754] cx231xx #0: UsbInterface::sendCommand, failed with status --32
[    2.373011] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[    2.382006] cx231xx #0: Changing the i2c master port to 3
[    2.386252] cx25840 15-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
[    2.412085] cx25840 15-0044:  Firmware download size changed to 16 bytes max length
[    2.415597] cx25840 15-0044: unable to open firmware v4l-cx231xx-avcore-01.fw
[    2.448841] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.1
[    2.468502] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[    2.516996] cx231xx #0: video_mux : 0
[    2.518927] cx231xx #0: do_mode_ctrl_overrides : 0xb000
[    2.521745] cx231xx #0: do_mode_ctrl_overrides NTSC
[    2.530728] cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
[    2.532972] cx231xx #0: cx231xx #0/0: registered device vbi0
[    2.534857] cx231xx #0: V4L2 device registered as video0 and vbi0
[    2.537056] cx231xx #0: EndPoint Addr 0x84, Alternate settings: 5
[    2.549992] cx231xx #0: Alternate setting 0, max size= 512
[    2.552147] cx231xx #0: Alternate setting 1, max size= 184
[    2.554244] cx231xx #0: Alternate setting 2, max size= 728
[    2.556181] cx231xx #0: Alternate setting 3, max size= 2892
[    2.558023] cx231xx #0: Alternate setting 4, max size= 1800
[    2.559827] cx231xx #0: EndPoint Addr 0x85, Alternate settings: 2
[    2.583025] cx231xx #0: Alternate setting 0, max size= 512
[    2.584811] cx231xx #0: Alternate setting 1, max size= 512
[    2.586602] cx231xx #0: EndPoint Addr 0x86, Alternate settings: 2
[    2.598406] cx231xx #0: Alternate setting 0, max size= 512
[    2.600058] cx231xx #0: Alternate setting 1, max size= 576
[   13.304543] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
[   13.314640] cx231xx #0: can't change interface 3 alt no. to 0 (err=-71)
[   29.289535] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
[   29.299602] cx231xx #0: can't change interface 3 alt no. to 0 (err=-71)
[  180.241409] usb 1-2: USB disconnect, address 2
[  184.261061] usb 1-2: new high speed USB device using ehci_hcd and address 6
[  184.377920] usb 1-2: New USB device found, idVendor=2040, idProduct=c200
[  184.377928] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  184.377934] usb 1-2: Product: Hauppauge Device
[  184.377939] usb 1-2: Manufacturer: Hauppauge
[  184.377944] usb 1-2: SerialNumber: 0013566174
[  184.381595] cx231xx #1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 5 interfaces
[  184.381603] cx231xx #1: registering interface 1
[  184.381784] cx231xx #1: can't change interface 3 alt no. to 3: Max. Pkt size = 0
[  184.381906] cx231xx #1: can't change interface 4 alt no. to 1: Max. Pkt size = 0
[  184.382057] cx231xx #1: Identified as Hauppauge USB Live 2 (card=9)
[  184.400418] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.400788] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.401167] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.401539] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.401907] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.402293] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.402782] cx231xx #1: UsbInterface::sendCommand, failed with status --32
[  184.402788] cx231xx #1: cx231xx_dev_init: cx231xx_afe init super block - errCode [-32]!
[  184.402966] cx231xx #1: cx231xx_init_dev: cx231xx_i2c_register - errCode [-32]!
[  184.402981] cx231xx: probe of 1-2:1.1 failed with error -32