* support for IR remote TerraTec Cinergy T USB XXS
@ 2010-12-29 14:49 Stefan Kriwanek
2010-12-31 11:18 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Kriwanek @ 2010-12-29 14:49 UTC (permalink / raw)
To: linux-media
[-- Attachment #1.1: Type: text/plain, Size: 1672 bytes --]
Dear linux-media developers,
I think I found a bug in the support of the TerraTec Cinergy T USB XXS
remote control, or maybe just a new hardware revision appeared.
When I recently bought such a USB-stick I found the remote not working,
instead 'dib0700: Unknown remote controller key' lines appearing in
syslog on each keypress. The dvb_usb_dib0700 kernel module got
autoloaded by my Ubuntu 10.10. I am using current hg revision of v4l-dvb
and load the kernel module using the 'dvb_usb_dib0700_ir_proto=0'
option. Simply adding the keycodes to the driver file
(linux/drivers/media/dvb/dvb-usb/dib0700_devices.c,
patch appended) made things work.
However, by incident I found those very keycodes are already defined in
the linux/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c file, so
maybe the issue is just about loading it?
'lsusb' lists my device as
Bus 001 Device 006: ID 0ccd:00ab TerraTec Electronic GmbH
despite I do not own the 'HD' version of the device, your wiki
http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS
says that ID corresponds to. The output of 'lsusb -v' is appended to
this mail.
'cat /proc/bus/input/devices' lists the input device as
I: Bus=0003 Vendor=0ccd Product=00ab Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:12.2-2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:12.2/usb1/1-2/input/input13
U: Uniq=
H: Handlers=kbd event8
B: EV=3
B: KEY=14afc336 2b4285f00000000 0 480158000 219040000801 9e96c000000000
90024010004ffc
I hope you could add support for my stick; I'd be happy to provide
further information if necessary.
Best regards
Stefan
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: terratec_cinergy_t_usb_xxs.patch --]
[-- Type: text/x-patch; name="terratec_cinergy_t_usb_xxs.patch", Size: 1997 bytes --]
diff -r abd3aac6644e linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Fri Jul 02 00:38:54 2010 -0300
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Wed Dec 29 13:17:41 2010 +0100
@@ -831,6 +831,57 @@
{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
{ 0x4541, KEY_SCREEN }, /* Full screen toggle, 'Hold' for Teletext */
{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
+
+ /* Key codes for the Terratec Cinergy T USB XXS remote, copied from rc-nec-terratec-cinergy-xs.c
+ set dvb_usb_dib0700_ir_proto=0 */
+ { 0x1401, KEY_POWER2 },
+ { 0x1402, KEY_1 },
+ { 0x1403, KEY_2 },
+ { 0x1404, KEY_3 },
+ { 0x1405, KEY_4 },
+ { 0x1406, KEY_5 },
+ { 0x1407, KEY_6 },
+ { 0x1408, KEY_7 },
+ { 0x1409, KEY_8 },
+ { 0x140a, KEY_9 },
+ { 0x140b, KEY_TUNER }, /* AV */
+ { 0x140c, KEY_0 },
+ { 0x140d, KEY_MODE }, /* A.B, alternatively match to KEY_AB? */
+ { 0x140f, KEY_EPG }, /* EPG / GUIDE */
+ { 0x1410, KEY_UP },
+ { 0x1411, KEY_LEFT },
+ { 0x1412, KEY_OK },
+ { 0x1413, KEY_RIGHT },
+ { 0x1414, KEY_DOWN },
+ { 0x1416, KEY_INFO },
+ { 0x1417, KEY_RED },
+ { 0x1418, KEY_GREEN },
+ { 0x1419, KEY_YELLOW },
+ { 0x141a, KEY_BLUE },
+ { 0x141b, KEY_CHANNELUP },
+ { 0x141c, KEY_VOLUMEUP },
+ { 0x141d, KEY_MUTE },
+ { 0x141e, KEY_VOLUMEDOWN },
+ { 0x141f, KEY_CHANNELDOWN },
+ { 0x1440, KEY_PAUSE },
+ { 0x1441, KEY_HOME },
+ { 0x1442, KEY_MENU },
+ { 0x1443, KEY_SUBTITLE },
+ { 0x1444, KEY_TEXT },
+ { 0x1445, KEY_DELETE },
+ { 0x1446, KEY_TV },
+ { 0x1447, KEY_DVD },
+ { 0x1448, KEY_STOP },
+ { 0x1449, KEY_VIDEO },
+ { 0x144a, KEY_RADIO }, /* Music */
+ { 0x144b, KEY_CAMERA }, /* Pic */
+ { 0x144c, KEY_PLAY },
+ { 0x144d, KEY_BACKSPACE },
+ { 0x144e, KEY_REWIND },
+ { 0x144f, KEY_FASTFORWARD },
+ { 0x1454, KEY_LAST },
+ { 0x1458, KEY_RECORD },
+ { 0x145c, KEY_NEXT },
};
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
[-- Attachment #1.3: lsusb-v --]
[-- Type: text/plain, Size: 3147 bytes --]
Bus 001 Device 006: ID 0ccd:00ab TerraTec Electronic GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x00ab
bcdDevice 1.00
iManufacturer 1 TerraTec GmbH
iProduct 2 Cinergy T XXS
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: support for IR remote TerraTec Cinergy T USB XXS
2010-12-29 14:49 support for IR remote TerraTec Cinergy T USB XXS Stefan Kriwanek
@ 2010-12-31 11:18 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 2+ messages in thread
From: Mauro Carvalho Chehab @ 2010-12-31 11:18 UTC (permalink / raw)
To: Stefan Kriwanek; +Cc: linux-media, Douglas Landgraf
Em 29-12-2010 12:49, Stefan Kriwanek escreveu:
> Dear linux-media developers,
>
> I think I found a bug in the support of the TerraTec Cinergy T USB XXS
> remote control, or maybe just a new hardware revision appeared.
>
> When I recently bought such a USB-stick I found the remote not working,
> instead 'dib0700: Unknown remote controller key' lines appearing in
> syslog on each keypress. The dvb_usb_dib0700 kernel module got
> autoloaded by my Ubuntu 10.10. I am using current hg revision of v4l-dvb
> and load the kernel module using the 'dvb_usb_dib0700_ir_proto=0'
> option. Simply adding the keycodes to the driver file
> (linux/drivers/media/dvb/dvb-usb/dib0700_devices.c,
> patch appended) made things work.
Don't use a legacy, obsoleted, discontinued tree when writing patches. The
mercurial tree is obsolete, and it is there just to preserve the tree history.
Instead, you should use the git tree. The media_build tree[1] provides a
feature similar to the old hg tree.
[1] http://git.linuxtv.org/media_build.git
The IR code has changed _a_lot_ since the last update in -hg. Basically, the
entire support were rewritten, and now the protocol is (or should) be
auto-detected.
Douglas,
It would be a good idea to write a patch for the legacy mercurial tree warning
people about that.
>
> However, by incident I found those very keycodes are already defined in
> the linux/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c file, so
> maybe the issue is just about loading it?
>
> 'lsusb' lists my device as
> Bus 001 Device 006: ID 0ccd:00ab TerraTec Electronic GmbH
> despite I do not own the 'HD' version of the device, your wiki
> http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS
> says that ID corresponds to. The output of 'lsusb -v' is appended to
> this mail.
>
> 'cat /proc/bus/input/devices' lists the input device as
> I: Bus=0003 Vendor=0ccd Product=00ab Version=0100
> N: Name="IR-receiver inside an USB DVB receiver"
> P: Phys=usb-0000:00:12.2-2/ir0
> S: Sysfs=/devices/pci0000:00/0000:00:12.2/usb1/1-2/input/input13
> U: Uniq=
> H: Handlers=kbd event8
> B: EV=3
> B: KEY=14afc336 2b4285f00000000 0 480158000 219040000801 9e96c000000000
> 90024010004ffc
>
> I hope you could add support for my stick; I'd be happy to provide
> further information if necessary.
>
> Best regards
> Stefan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-12-31 11:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-29 14:49 support for IR remote TerraTec Cinergy T USB XXS Stefan Kriwanek
2010-12-31 11:18 ` Mauro Carvalho Chehab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).