From: tosiara <tosiara@gmail.com>
To: linux-media@vger.kernel.org
Subject: em28xx based analog tv tuner USB KWorld PVR-TV 305U (eb1a:e305): no sound
Date: Sun, 13 Mar 2011 10:36:38 +0200 [thread overview]
Message-ID: <4D7C8216.8060504@gmail.com> (raw)
Hello
I've made tests with my *KWorld* usb tuner:
*Model*: USB KWorld PVR-TV 305U
*Vendor/Product id*: [eb1a:e305].
*Tests made*:
- Analog video [Worked]
- Analog audio [not working, details attached below]
Hardware and system details:
# lsusb -s 002:003
Bus 002 Device 003: ID eb1a:e305 eMPIA Technology, Inc.
# uname -a
Linux vista.linuks.lan 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 athlon i386 GNU/Linux
# cat /etc/issue
Welcome to openSUSE 11.3 "Teal" - Kernel \r (\l).
ALSA version: 1.0.24.1-72.1
Build latest dvb drivers from linuxtv.org:
# lsmod
Module Size Used by
aes_i586 7396 1
aes_generic 27151 1 aes_i586
fuse 65789 3
ip6t_LOG 5150 11
xt_tcpudp 2107 25
xt_pkttype 912 4
xt_physdev 1539 2
ipt_LOG 5119 11
xt_limit 1705 22
rfcomm 69557 4
vboxnetadp 7018 0
vboxnetflt 16967 0
sco 16711 2
af_packet 19512 4
bridge 71700 1
stp 1719 1 bridge
llc 5093 2 bridge,stp
bnep 14764 2
vboxdrv 204362 2 vboxnetadp,vboxnetflt
l2cap 53658 16 rfcomm,bnep
snd_pcm_oss 47613 0
snd_mixer_oss 16751 1 snd_pcm_oss
snd_seq 57343 0
snd_seq_device 6598 1 snd_seq
edd 8720 0
vmnet 46129 13
ppdev 8444 0
parport_pc 33475 0
parport 34052 2 ppdev,parport_pc
vmblock 11886 1
vsock 41336 0
vmci 59117 1 vsock
vmmon 76038 0
ip6t_REJECT 4311 3
nf_conntrack_ipv6 18225 4
ip6table_raw 1187 1
xt_NOTRACK 816 4
ipt_REJECT 2152 3
xt_state 1162 8
iptable_raw 1246 1
iptable_filter 1418 1
ip6table_mangle 1588 0
nf_conntrack_netbios_ns 1382 0
nf_conntrack_ipv4 8691 4
nf_conntrack 75628 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 1201 1 nf_conntrack_ipv4
ip_tables 12172 2 iptable_raw,iptable_filter
ip6table_filter 1359 1
cpufreq_conservative 10064 0
cpufreq_userspace 2583 0
cpufreq_powersave 914 0
ip6_tables 13508 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 17098 17 ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables
powernow_k8 18707 0
mperf 1255 1 powernow_k8
loop 14694 0
dm_mod 73457 0
em28xx_alsa 6316 0
arc4 1281 2
tuner_xc2028 20652 1
ecb 1967 2
tuner 18636 1
snd_hda_codec_atihdmi 2591 1
ir_lirc_codec 4075 0
lirc_dev 15476 1 ir_lirc_codec
tvp5150 15288 1
ir_sony_decoder 2005 0
snd_hda_codec_idt 58593 1
ir_jvc_decoder 2098 0
ir_rc6_decoder 2450 0
firewire_ohci 23817 0
firewire_core 52354 1 firewire_ohci
crc_itu_t 1435 1 firewire_core
snd_hda_intel 24950 3
rc_rc6_mce 1230 0
snd_hda_codec 98635 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6164 1 snd_hda_codec
em28xx 89777 1 em28xx_alsa
snd_pcm 87882 4 snd_pcm_oss,em28xx_alsa,snd_hda_intel,snd_hda_codec
ir_rc5_decoder 1970 0
ath5k 135497 0
mac80211 248390 1 ath5k
ath 8743 1 ath5k
ohci1394 30324 0
snd_timer 21669 2 snd_seq,snd_pcm
ene_ir 14962 0
snd 65788 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,em28xx_alsa,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ir_nec_decoder 2386 0
hp_wmi 5882 0
cfg80211 156087 3 ath5k,mac80211,ath
v4l2_common 10269 3 tuner,tvp5150,em28xx
videobuf_vmalloc 4868 1 em28xx
videobuf_core 18232 2 em28xx,videobuf_vmalloc
jmb38x_ms 12491 0
sdhci_pci 7110 0
sdhci 20020 1 sdhci_pci
hp_accel 12712 0
lis3lv02d 7908 1 hp_accel
uvcvideo 60566 0
soundcore 7379 1 snd
snd_page_alloc 8041 2 snd_hda_intel,snd_pcm
video 21205 0
btusb 15667 2
bluetooth 96350 9 rfcomm,sco,bnep,l2cap,btusb
rfkill 17298 4 hp_wmi,cfg80211,bluetooth
sg 27872 0
wmi 7467 1 hp_wmi
rc_core 18319 10 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,rc_rc6_mce,em28xx,ir_rc5_decoder,ene_ir,ir_nec_decoder
r8169 38911 0
mmc_core 72345 1 sdhci
sr_mod 14671 0
tveeprom 11421 1 em28xx
memstick 9710 1 jmb38x_ms
ieee1394 88668 1 ohci1394
battery 9730 0
input_polldev 3799 1 lis3lv02d
pcspkr 1614 0
joydev 9354 0
ac 3083 0
videodev 75386 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo
cdrom 38085 1 sr_mod
button 5449 0
i2c_piix4 11574 0
k10temp 2723 0
ext4 365656 1
jbd2 83102 1 ext4
crc16 1403 2 l2cap,ext4
fglrx 2410654 325
fan 3539 0
processor 40761 1 powernow_k8
ata_generic 2743 0
pata_atiixp 3564 0
thermal 17357 0
thermal_sys 14678 4 video,fan,processor,thermal
Plugging tuner in, dmesg:
[ 1875.180265] usb 2-4: new high speed USB device using ehci_hcd and address 4
[ 1875.298100] usb 2-4: New USB device found, idVendor=eb1a, idProduct=e305
[ 1875.298117] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1875.298152] usb 2-4: Product: USB 2861 Device
[ 1875.300292] em28xx: New device USB 2861 Device @ 480 Mbps (eb1a:e305, interface 0, class 0)
[ 1875.300580] em28xx #0: chip ID is em2860
[ 1875.487692] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 05 e3 d0 00 5c 00 6a 22 00 00
[ 1875.487730] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00
[ 1875.487764] em28xx #0: i2c eeprom 20: 06 00 01 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[ 1875.487796] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 1875.487828] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.487858] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.487888] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 1875.487919] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00
[ 1875.487950] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 1875.487981] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488011] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488042] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488072] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488103] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488201] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488304] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1875.488424] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x28a51142
[ 1875.488436] em28xx #0: EEPROM info:
[ 1875.488447] em28xx #0: AC97 audio (5 sample rates)
[ 1875.488458] em28xx #0: 500mA max power
[ 1875.488472] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 1875.490941] em28xx #0: Identified as KWorld DVB-T 305U (card=47)
[ 1875.490954] em28xx #0:
[ 1875.490959]
[ 1875.490965] em28xx #0: The support for this board weren't valid yet.
[ 1875.490974] em28xx #0: Please send a report of having this working
[ 1875.490982] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 1875.490987]
[ 1875.498585] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
[ 1875.570814] tvp5150 0-005c: tvp5150am1 detected.
[ 1875.612698] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[ 1875.612837] xc2028 0-0061: creating new instance
[ 1875.612840] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 1875.612848] usb 2-4: firmware: requesting xc3028-v27.fw
[ 1875.619760] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 1875.672106] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 1883.005108] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[ 1883.154107] SCODE (20000000), id 000000000000b700:
[ 1883.154156] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 1883.319239] em28xx #0: Config register raw data: 0xd0
[ 1883.332960] em28xx #0: AC97 vendor ID = 0xffffffff
[ 1883.339834] em28xx #0: AC97 features = 0x6a90
[ 1883.339843] em28xx #0: Empia 202 AC97 audio processor detected
[ 1884.746060] em28xx #0: v4l2 driver version 0.1.2
[ 1885.414516] em28xx #0: V4L2 video device registered as video1
[ 1885.414530] em28xx #0: V4L2 VBI device registered as vbi0
[ 1885.414541] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 1885.414550] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 1885.423686] em28xx video device (eb1a:e305): interface 1, class 255 found.
[ 1885.423696] em28xx This is an anciliary interface not used by the driver
Appears new ALSA capture device:
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 2: Em28xxAudio [Em28xx Audio], device 0: Em28xx Audio [Empia 28xx Capture]
Subdevices: 1/1
Subdevice #0: subdevice #0
I can see video only using MPlayer:
mplayer tv:// -tv driver=v4l2:norm=PAL-DK:device=/dev/video1:freq=59.25
Picture is of acceptable quality
If I try to capture video and audio I get audio input/output error:
> mencoder tv:// -tv device=/dev/video1:driver=v4l2:width=320:height=240:norm=PAL-DK:freq=59.25:alsa:immediatemode=0:adevice=hw.2,0 -oac mp3lame -lameopts cbr:br=128 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=2000 -o test.avi
MPlayer dev-SVN-r31930-4.5-openSUSE Linux 11.3 (i686)-Packman (C) 2000-2010 MPlayer Teamsuccess: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: KWorld DVB-T 305U
Tuner cap:
Tuner rxs:
Capabilities: video capture VBI capture device tuner audio read/write streaming
supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Channel count not available - reverting to default: 2
Channel count not available - reverting to default: 2
[V] filefmt:9 fourcc:0x32595559 size:320x240 fps:25.000 ftime:=0.0400
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
Movie-Aspect is undefined - no prescaling applied.
[swscaler @ 0x8f20170] using unscaled yuyv422 -> yuv420p special converter
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
MP3 audio selected.
Forcing audio preload to 0, max pts correction to 0.
3 duplicate frame(s)!
Pos: 0.2s 1f ( 0%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0]
Error reading audio: Input/output error
Error reading audio: Input/output error
Error reading audio: Input/output error
Error reading audio: Input/output error
Error reading audio: Input/output error
video buffer full - dropping frame
video buffer full - dropping frame
video buffer full - dropping frame
video buffer full - dropping frame
video buffer full - dropping frame
video buffer full - dropping frame
If I try to capture sound only using audacity - it does not record anything: audio recording progress bar stays at 00:00:00 and nothing is recorded.
And sometimes this message appears in dmesg:
[ 5663.100194] ALSA pcm_lib.c:1752: capture write error (DMA or IRQ trouble?)
When using tvtime there is no sound too.
I followed instructions on tvtime WIKI:
> sox -r 32000 -t ossdsp /dev/dsp2 -t ossdsp /dev/dsp
/dev/dsp2: (ossdsp)
Encoding: Signed PCM
Channels: 2 @ 16-bit
Samplerate: 32000Hz
Replaygain: off
Duration: unknown
In:0.00%
00:00:00.00 [00:00:00.00] Out:0 [ | ] Clip:0
sox FAIL sox: `/dev/dsp2' lsx_readbuf: Input/output error
In:0.00% 00:00:00.00 [00:00:00.00] Out:0 [ | ] Clip:0
Done.
The above command fails in apprx. 4 seconds
Windows driver contains these files:
# ls x86/ -l
total 780
-rw------- 1 tos users 48 2011-03-06 18:01 .directory
-r-xr-xr-x 1 tos users 5062 2007-01-19 14:15 EMAUDIO.INF
-r-xr-xr-x 1 tos users 22912 2007-01-12 10:55 emAudio.sys
-r-xr-xr-x 1 tos users 34335 2007-01-19 14:15 EMBDA.INF
-r-xr-xr-x 1 tos users 380416 2007-01-12 10:55 emBDA.sys
-r-xr-xr-x 1 tos users 61440 2006-12-15 09:54 emmon.exe
-r-xr-xr-x 1 tos users 30208 2006-12-21 06:12 emOEM.sys
-r-xr-xr-x 1 tos users 106496 2007-01-12 10:53 emPRP.ax
-r-xr-xr-x 1 tos users 49152 2007-03-21 06:00 emunist.exe
-r-xr-xr-x 1 tos users 15548 2007-01-24 03:27 emwhql.cat <http://emwhql.cat>
drwxr-xr-x 2 tos users 4096 1970-01-01 03:00 Language
-r-xr-xr-x 1 tos users 16382 2006-11-09 06:50 merlinC.rom
-r-xr-xr-x 1 tos users 53248 2007-03-21 05:58 SetupDrv.exe
-r-xr-xr-x 1 tos users 2068 2006-12-11 15:20 TVEpaDrv.ini
I would like to ask, if this is driver, firmware or ALSA issue? Maybe I need to extract firmware from OEM drivers but how can I do that? Maybe try other kernel/ALSA?
Or maybe this device is not supported yet?
Can anybody provide feedback on this issue?
Thank you
next reply other threads:[~2011-03-13 8:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-13 8:36 tosiara [this message]
2011-03-13 13:29 ` em28xx based analog tv tuner USB KWorld PVR-TV 305U (eb1a:e305): no sound tosiara
[not found] ` <BLU118-W10258E4268CCC10262F101E5CD0@phx.gbl>
[not found] ` <AANLkTinARMoc=2UL44oX9FzuxszqLfweNwabt31go6tw@mail.gmail.com>
2011-03-13 17:03 ` wim delvaux
2011-03-16 10:41 ` tosiara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D7C8216.8060504@gmail.com \
--to=tosiara@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox