Re: [w_scan PATCH] Add Brazil support on w_scan

[Mauro Carvalho Chehab <mchehab@redhat.com>]

Em 31-03-2011 14:15, handygewinnspiel@gmx.de escreveu:
> 
>> Em 29-03-2011 20:21, Mauro Carvalho Chehab escreveu:
>>> Em 29-03-2011 17:11, handygewinnspiel@gmx.de escreveu:
>>>> So I changed it now to scan any srate for 6MHz networks, but skip over
>> those which are unsupported by bandwidth limitation.
>> ...
>>> Anyway, I'll test the today's version and reply if I detect any troubles
>> on it.
>>
>> Test results:
>>
>> 	$ ./w_scan -c BR -fc 
>> Took about 30 mins for scan. As the board I'm using doesn't support
>> QAM_AUTO
>> for DVB-C, it seek only QAM_64
> 
> This is unexpected && should be fixed to fit to w_scan's default behaviour: first QAM_64, then QAM_256.
> 
> Can you pls re-check with the following change in countries.c line 500ff
> 
> /*
>  * start/stop values for dvbc qam loop
>  * 0 == QAM_64, 1 == QAM_256, 2 == QAM_128
>  */
> int dvbc_qam_max(int channel, int channellist) {
> switch(channellist) {
>        case DVBC_FI:    return 2; //QAM128
> +      case DVBC_BR:
>        case DVBC_FR:
>        case DVBC_QAM:   return 1; //QAM256
>        default:         return 0; //no qam loop
>        }
> }
> 
>     
> int dvbc_qam_min(int channel, int channellist) {
> switch(channellist) {
>        case DVBC_FI:
> +      case DVBC_BR:
>        case DVBC_FR:
>        case DVBC_QAM:   return 0; //QAM64
>        default:         return 0; //no qam loop
>        }
> }
> 
> I don't think that adding QAM_128 makes sense.

Agreed
> Later, if i have more reports from 6MHz network users, i will reduce the number of symbol rates.

Ok.

Worked. Thanks!
Mauro.