From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:56209 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756556Ab1DBTQn (ORCPT ); Sat, 2 Apr 2011 15:16:43 -0400 Message-ID: <4D977619.4080607@iki.fi> Date: Sat, 02 Apr 2011 22:16:41 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Sami Haahtinen CC: linux-media@vger.kernel.org Subject: Re: Anysee E30 Combo Plus failing to tune References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-ID: Sender: Moi Sami, On 04/02/2011 09:52 PM, Sami Haahtinen wrote: > Hey, > I have a Anysee E30 Combo Plus and i'm having trouble getting it to > detect properly. According to various sources it should be supported, > but yet it fails for me. I've tried with the stock driver and the > backports one (one instructed in wiki) and neither work. I think your device is newer model where is new DNOD44CDV086A tuner module and inside that module is TDA18212 silicon tuner which does not have working driver yet. If your device have antenna loop-through it does have this new tuner module. Unfortunately I don't have this device model, I got older one :-(. But luckily enough I have got E7TC which is almost similar as E30 Combo. I have DVB-C and DVB-T picture out from E7TC, it is just up to few weeks I will get TDA18212 tuner driver ready. Antti -- http://palosaari.fi/