Re: TT-budget S2-3200 cannot tune on HB13E DVBS2 transponder

[Issa Gorissen <flop.m@usa.net>]

On 05/04/11 21:07, Steffen Barszus wrote:
> On Tue, 05 Apr 2011 13:00:14 +0200
> "Issa Gorissen" <flop.m@usa.net> wrote:
>
>> Hi,
>>
>> Eutelsat made a recent migration from DVB-S to DVB-S2 (since
>> 31/3/2011) on two transponders on HB13E
>>
>> - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500
>> Msymb/s 0.2 Pilot off Polar H
>>
>> - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500
>> Msymb/s 0.2 Pilot off Polar H
>>
>>
>> Before those changes, with my TT S2 3200, I was able to watch TV on
>> those transponders. Now, I cannot even tune on those transponders. I
>> have tried with scan-s2 and w_scan and the latest drivers from git.
>> They both find the transponders but cannot tune onto it.
>>
>> Something noteworthy is that my other card, a DuoFlex S2 can tune
>> fine on those transponders.
>>
>> My question is; can someone try this as well with a TT S2 3200 and
>> post the results ?
> i read something about it lately here (german!): 
> http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938
>
> It says in stb0899_drv.c function:
> static void stb0899_set_iterations(struct stb0899_state *state) 
>
> This:
> reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER);
> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
> stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
>
> should be replaced with this:
>
> reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER);
> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
> stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
>
> Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines
> affected.
>
> Kind Regards 
>
> Steffen
Hi Steffen,

Unfortunately, it does not help in my case. Thx anyway.

--
Issa