From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from cmsout01.mbox.net ([165.212.64.31]:33410 "EHLO cmsout01.mbox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753455Ab1DFT4Z (ORCPT ); Wed, 6 Apr 2011 15:56:25 -0400 Message-ID: <4D9CC54B.9060205@usa.net> Date: Wed, 06 Apr 2011 21:55:55 +0200 From: Issa Gorissen MIME-Version: 1.0 To: Steffen Barszus CC: linux-media@vger.kernel.org Subject: Re: TT-budget S2-3200 cannot tune on HB13E DVBS2 transponder References: <632PDek8o1744S03.1302001214@web03.cms.usa.net> <20110405210704.24555a04@grobi> In-Reply-To: <20110405210704.24555a04@grobi> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit List-ID: Sender: On 05/04/11 21:07, Steffen Barszus wrote: > On Tue, 05 Apr 2011 13:00:14 +0200 > "Issa Gorissen" wrote: > >> Hi, >> >> Eutelsat made a recent migration from DVB-S to DVB-S2 (since >> 31/3/2011) on two transponders on HB13E >> >> - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500 >> Msymb/s 0.2 Pilot off Polar H >> >> - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500 >> Msymb/s 0.2 Pilot off Polar H >> >> >> Before those changes, with my TT S2 3200, I was able to watch TV on >> those transponders. Now, I cannot even tune on those transponders. I >> have tried with scan-s2 and w_scan and the latest drivers from git. >> They both find the transponders but cannot tune onto it. >> >> Something noteworthy is that my other card, a DuoFlex S2 can tune >> fine on those transponders. >> >> My question is; can someone try this as well with a TT S2 3200 and >> post the results ? > i read something about it lately here (german!): > http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938 > > It says in stb0899_drv.c function: > static void stb0899_set_iterations(struct stb0899_state *state) > > This: > reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER); > STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); > stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); > > should be replaced with this: > > reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER); > STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale); > stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg); > > Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines > affected. > > Kind Regards > > Steffen Hi Steffen, Unfortunately, it does not help in my case. Thx anyway. -- Issa