From: Patrice Chotard <patrice.chotard@sfr.fr>
To: linux-media@vger.kernel.org, Jean-Francois Moine <moinejf@free.fr>
Cc: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Subject: [PATCH 4/5] gspca - jeilinj: Add SPORTSCAM_DV15 camera support
Date: Mon, 18 Apr 2011 22:40:54 +0200 [thread overview]
Message-ID: <4DACA1D6.3050400@sfr.fr> (raw)
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr>
---
Documentation/video4linux/gspca.txt | 1 +
drivers/media/video/gspca/jeilinj.c | 98 ++++++++++++++++++++++++-----------
2 files changed, 68 insertions(+), 31 deletions(-)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 56ba7bb..6b85f4f 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -265,6 +265,7 @@ pac7302 093a:2629 Genious iSlim 300
pac7302 093a:262a Webcam 300k
pac7302 093a:262c Philips SPC 230 NC
jeilinj 0979:0280 Sakar 57379
+jeilinj 0979:0280 Sportscam DV15
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index 51b68db..da92867 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -34,6 +34,7 @@ MODULE_LICENSE("GPL");
/* Default timeouts, in ms */
#define JEILINJ_CMD_TIMEOUT 500
+#define JEILINJ_CMD_DELAY 160
#define JEILINJ_DATA_TIMEOUT 1000
/* Maximum transfer size to use. */
@@ -41,12 +42,17 @@ MODULE_LICENSE("GPL");
#define FRAME_HEADER_LEN 0x10
#define FRAME_START 0xFFFFFFFF
+enum {
+ SAKAR_57379,
+ SPORTSCAM_DV15,
+};
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
int blocks_left;
const struct v4l2_pix_format *cap_mode;
/* Driver stuff */
+ u8 type;
u8 quality; /* image quality */
u8 jpeg_hdr[JPEG_HDR_SZ];
};
@@ -54,6 +60,7 @@ struct sd {
struct jlj_command {
unsigned char instruction[2];
unsigned char ack_wanted;
+ unsigned char delay;
};
/* AFAICT these cameras will only do 320x240. */
@@ -114,41 +121,53 @@ static void jlj_read1(struct gspca_dev *gspca_dev, unsigned char response)
static int jlj_start(struct gspca_dev *gspca_dev)
{
int i;
+ int start_commands_size;
u8 response = 0xff;
struct sd *sd = (struct sd *) gspca_dev;
struct jlj_command start_commands[] = {
- {{0x71, 0x81}, 0},
- {{0x70, 0x05}, 0},
- {{0x95, 0x70}, 1},
- {{0x71, 0x81}, 0},
- {{0x70, 0x04}, 0},
- {{0x95, 0x70}, 1},
- {{0x71, 0x00}, 0},
- {{0x70, 0x08}, 0},
- {{0x95, 0x70}, 1},
- {{0x94, 0x02}, 0},
- {{0xde, 0x24}, 0},
- {{0x94, 0x02}, 0},
- {{0xdd, 0xf0}, 0},
- {{0x94, 0x02}, 0},
- {{0xe3, 0x2c}, 0},
- {{0x94, 0x02}, 0},
- {{0xe4, 0x00}, 0},
- {{0x94, 0x02}, 0},
- {{0xe5, 0x00}, 0},
- {{0x94, 0x02}, 0},
- {{0xe6, 0x2c}, 0},
- {{0x94, 0x03}, 0},
- {{0xaa, 0x00}, 0},
- {{0x71, 0x1e}, 0},
- {{0x70, 0x06}, 0},
- {{0x71, 0x80}, 0},
- {{0x70, 0x07}, 0}
+ {{0x71, 0x81}, 0, 0},
+ {{0x70, 0x05}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+ {{0x71, 0x81 - gspca_dev->curr_mode}, 0, 0},
+ {{0x70, 0x04}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+ {{0x71, 0x00}, 0, 0}, /* start streaming ??*/
+ {{0x70, 0x08}, 0, JEILINJ_CMD_DELAY},
+ {{0x95, 0x70}, 1, 0},
+#define SPORTSCAM_DV15_CMD_SIZE 9
+ {{0x94, 0x02}, 0, 0},
+ {{0xde, 0x24}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xdd, 0xf0}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe3, 0x2c}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe4, 0x00}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe5, 0x00}, 0, 0},
+ {{0x94, 0x02}, 0, 0},
+ {{0xe6, 0x2c}, 0, 0},
+ {{0x94, 0x03}, 0, 0},
+ {{0xaa, 0x00}, 0, 0},
+ {{0x71, 0x1e}, 0, 0},
+ {{0x70, 0x06}, 0, 0},
+ {{0x71, 0x80}, 0, 0},
+ {{0x70, 0x07}, 0, 0}
};
sd->blocks_left = 0;
- for (i = 0; i < ARRAY_SIZE(start_commands); i++) {
+ /* Under Windows, USB spy shows that only the 9 first start
+ * commands are used for SPORTSCAM_DV15 webcam
+ */
+ if (sd->type == SPORTSCAM_DV15)
+ start_commands_size = SPORTSCAM_DV15_CMD_SIZE;
+ else
+ start_commands_size = ARRAY_SIZE(start_commands);
+
+ for (i = 0; i < start_commands_size; i++) {
jlj_write2(gspca_dev, start_commands[i].instruction);
+ if (start_commands[i].delay)
+ msleep(start_commands[i].delay);
if (start_commands[i].ack_wanted)
jlj_read1(gspca_dev, response);
}
@@ -207,6 +226,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct cam *cam = &gspca_dev->cam;
struct sd *dev = (struct sd *) gspca_dev;
+ dev->type = id->driver_info;
dev->quality = 85;
PDEBUG(D_PROBE,
"JEILINJ camera detected"
@@ -277,14 +297,25 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* Table of supported USB devices */
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0979, 0x0280)},
+ {USB_DEVICE(0x0979, 0x0280), .driver_info = SAKAR_57379},
+ {USB_DEVICE(0x0979, 0x0270), .driver_info = SPORTSCAM_DV15},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
/* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_sakar_57379 = {
+ .name = MODULE_NAME,
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+};
+
+/* sub-driver description */
+static const struct sd_desc sd_desc_sportscam_dv15 = {
.name = MODULE_NAME,
.config = sd_config,
.init = sd_init,
@@ -293,12 +324,17 @@ static const struct sd_desc sd_desc = {
.pkt_scan = sd_pkt_scan,
};
+static const struct sd_desc *sd_desc[2] = {
+ &sd_desc_sakar_57379,
+ &sd_desc_sportscam_dv15
+};
+
/* -- device connect -- */
static int sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return gspca_dev_probe(intf, id,
- &sd_desc,
+ sd_desc[id->driver_info],
sizeof(struct sd),
THIS_MODULE);
}
--
1.7.0.4
reply other threads:[~2011-04-18 20:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DACA1D6.3050400@sfr.fr \
--to=patrice.chotard@sfr.fr \
--cc=kilgota@banach.math.auburn.edu \
--cc=linux-media@vger.kernel.org \
--cc=moinejf@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox