Re: [PATCH 2/5] tm6000: add dtv78 parameter

[Stefan Ringel <stefan.ringel@arcor.de>]

Am 19.04.2011 23:22, schrieb Mauro Carvalho Chehab:
> Em 04-04-2011 17:18, stefan.ringel@arcor.de escreveu:
>> From: Stefan Ringel<stefan.ringel@arcor.de>
>>
>> add dtv78 parameter
> The dtv78 entry is a hack meant for card usage in Australia, that
> speeds up channel detection there. Again, it should be specified
> only when needed, and at per-board basis.
I have test and auto detect doesn't work right. That is also region 
specific staff and it's better to set outside. In other words in Germany 
it must set this param and in other country, which use only 7MHz or 8MHz 
it doesn't set (i.e. Australia).
>>
>> Signed-off-by: Stefan Ringel<stefan.ringel@arcor.de>
>> ---
>>   drivers/staging/tm6000/tm6000-cards.c |   11 +++++++++--
>>   1 files changed, 9 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
>> index eef58da..cf2e76c 100644
>> --- a/drivers/staging/tm6000/tm6000-cards.c
>> +++ b/drivers/staging/tm6000/tm6000-cards.c
>> @@ -65,6 +65,9 @@ static unsigned int xc2028_mts;
>>   module_param(xc2028_mts, int, 0644);
>>   MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)");
>>
>> +static unsigned int xc2028_dtv78;
>> +module_param(xc2028_dtv78, int, 0644);
>> +MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 only)");
>>
>>   struct tm6000_board {
>>   	char            *name;
>> @@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
>>   		ctl.read_not_reliable = 0;
>>   		ctl.msleep = 10;
>>   		ctl.demod = XC3028_FE_ZARLINK456;
>> -		ctl.vhfbw7 = 1;
>> -		ctl.uhfbw8 = 1;
>> +
>> +		if (xc2028_dtv78) {
>> +			ctl.vhfbw7 = 1;
>> +			ctl.uhfbw8 = 1;
>> +		}
>> +
>>   		if (xc2028_mts)
>>   			ctl.mts = 1;
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html