From: Mauro Carvalho Chehab <mchehab@infradead.org>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: Hendrik Skarpeid <skarp@online.no>,
linux-media@vger.kernel.org,
Nameer Kazzaz <nameer.kazzaz@gmail.com>
Subject: Re: DM1105: could not attach frontend 195d:1105
Date: Tue, 03 May 2011 18:33:51 -0300 [thread overview]
Message-ID: <4DC074BF.3000508@infradead.org> (raw)
In-Reply-To: <201010231220.51387.liplianin@me.by>
Hi Igor,
Em 23-10-2010 07:20, Igor M. Liplianin escreveu:
> В сообщении от 10 марта 2010 14:15:49 автор Hendrik Skarpeid написал:
>> Igor M. Liplianin skrev:
>>> On 3 марта 2010 18:42:42 Hendrik Skarpeid wrote:
>>>> Igor M. Liplianin wrote:
>>>>> Now to find GPIO's for LNB power control and ... watch TV :)
>>>>
>>>> Yep. No succesful tuning at the moment. There might also be an issue
>>>> with the reset signal and writing to GPIOCTR, as the module at the
>>>> moment loads succesfully only once.
>>>> As far as I can make out, the LNB power control is probably GPIO 16 and
>>>> 17, not sure which is which, and how they work.
>>>> GPIO15 is wired to tuner #reset
>>>
>>> New patch to test
>>
>> I think the LNB voltage may be a little to high on my card, 14.5V and
>> 20V. I would be a little more happy if they were 14 and 19, 13 and 18
>> would be perfect.
>> Anyways, as Igor pointet out, I don't have any signal from the LNB,
>> checked with another tuner card. It's a quad LNB, and the other outputs
>> are fine. Maybe it's' toasted from to high supply voltage! I little word
>> of warning then.
>> Anyways, here's my tweaked driver.
>
> Here is reworked patch for clear GPIO's handling.
> It allows to support I2C on GPIO's and per board LNB control through GPIO's.
> Also incuded support for Hendrik's card.
> I think it is clear how to change and test GPIO's for LNB and other stuff now.
> To Hendrik:
> Not shure, but there is maybe GPIO for raise/down LNB voltage a little (~1v).
> It is used for long coaxial lines to compensate voltage dropping.
>
> Signed-off-by: Igor M. Liplianin <liplianin@me.by>
I'm not sure if this patch is still valid or not, and if it should or not be
applied, as there were several discussions around it. As a reference, it is stored
at patchwork with:
X-Patchwork-Id: 279091
And still applies fine (yet, patchwork lost patch history/comments and SOB).
Igor, could you please update me if I should apply this patch or if the patch got
rejected/superseeded?
Thanks!
Mauro.
next prev parent reply other threads:[~2011-05-03 21:34 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B7D83B2.4030709@online.no>
2010-02-20 17:49 ` DM1105: could not attach frontend 195d:1105 Igor M. Liplianin
2010-02-22 20:56 ` Nameer Kazzaz
2010-02-23 12:14 ` Hendrik Skarpeid
2010-02-23 13:12 ` Nameer Kazzaz
2010-02-23 17:40 ` Igor M. Liplianin
2010-02-23 19:40 ` Nameer Kazzaz
2010-03-02 13:06 ` Hendrik Skarpeid
2010-03-02 19:09 ` Hendrik Skarpeid
2010-03-02 23:10 ` Igor M. Liplianin
2010-03-03 8:38 ` Hendrik Skarpeid
2010-03-03 15:49 ` Igor M. Liplianin
2010-03-03 16:42 ` Hendrik Skarpeid
2010-03-03 19:05 ` Igor M. Liplianin
2010-03-04 21:27 ` Hendrik Skarpeid
2010-03-04 22:16 ` Hendrik Skarpeid
2010-03-04 22:46 ` Hendrik Skarpeid
2010-03-06 11:52 ` Igor M. Liplianin
2010-03-06 19:18 ` Hendrik Skarpeid
2010-03-07 10:12 ` Igor M. Liplianin
2010-03-10 12:15 ` Hendrik Skarpeid
2010-03-31 10:47 ` Hendrik Skarpeid
2010-10-23 9:20 ` Igor M. Liplianin
2011-01-31 9:33 ` Matt Vickers
2011-01-31 17:55 ` Igor M. Liplianin
2011-02-01 5:17 ` Matt Vickers
2011-02-02 18:39 ` Igor M. Liplianin
2011-02-02 18:41 ` Igor M. Liplianin
2011-05-03 21:33 ` Mauro Carvalho Chehab [this message]
2011-05-05 18:41 Igor M. Liplianin
2011-05-05 19:01 ` Mauro Carvalho Chehab
-- strict thread matches above, loose matches on Subject: below --
2010-01-16 11:55 Igor M. Liplianin
2010-01-16 2:49 paul10
2010-01-16 3:11 ` paul10
2010-01-16 13:18 ` paul10
2010-01-16 14:12 ` Igor M. Liplianin
2010-01-19 8:51 ` paul10
2010-01-19 13:45 ` Igor M. liplianin
2010-01-20 21:20 ` paul10
2010-01-31 13:45 ` Igor M. Liplianin
2010-02-01 12:17 ` Nameer Kazzaz
2010-02-02 15:21 ` Nameer Kazzaz
2010-02-02 16:57 ` Igor M. Liplianin
2010-02-02 17:16 ` Nameer Kazzaz
2010-02-02 22:07 ` Nameer Kazzaz
2010-02-03 17:41 ` Igor M. Liplianin
2010-02-04 9:56 ` Nameer Kazzaz
2010-01-15 23:14 paul10
2010-01-15 23:54 ` Igor M. Liplianin
2010-01-16 0:10 ` Igor M. Liplianin
2010-01-15 9:15 paul10
2010-01-15 15:21 ` Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DC074BF.3000508@infradead.org \
--to=mchehab@infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
--cc=nameer.kazzaz@gmail.com \
--cc=skarp@online.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox