From: Marko Ristola <marko.ristola@kolumbus.fi>
To: "Adrian C." <anrxc@sysphere.org>
Cc: linux-media@vger.kernel.org
Subject: Re: Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver)
Date: Fri, 06 May 2011 20:37:10 +0300 [thread overview]
Message-ID: <4DC431C6.1010605@kolumbus.fi> (raw)
In-Reply-To: <alpine.LNX.2.00.1105040038430.10167@flfcurer.bet>
04.05.2011 01:42, Adrian C. kirjoitti:
> On Wed, 2 Mar 2011, Marko Ristola wrote:
>
>> So this means, that my remote control works, pressing key with hex
>> value 0x26 works.
>
> It works.
>
>> Unfortunately mantis_uart.c doesn't have IR input initialization at
>> all
>
> But it does not work. How can it work and not work at the same time?
The hardware device is active (it is enabled, messages are sent from
the remote to the Kernel Mantis software driver.
The bytes can be logged into /var/log/messages file.
That's all the driver is designed to do at this point.
>
>
> I have the Skystar HD2 (b), subsystem: 1ae4:0003 now, same chipset as
> Cinergy S2 and some others, VP-1041. Lirc failed with my old COM
> receiver so I tried to use the cards IR as fall-back, and of course I
> failed again. This was on 2.6.38.4.
>
> Only information I found is 1 year old[1]. "IR was in flux" but it still
> doesn't work even though mantis pulls in all those ir-* modules, no
> input device is created.
>
> Can someone fill us in, please, will it be supported this year?
Would you please ask from Manu Abraham. Maybe he gets paid for doing it.
I have experimented with my remote control too a few years ago,
but I think it is good if Manu gets it as a job.
Regards,
Marko Ristola
>
>
> 1. http://www.mail-archive.com/linux-media@vger.kernel.org/msg14641.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2011-05-06 17:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 22:42 Remote control not working for Terratec Cinergy C (2.6.37 Mantis driver) Adrian C.
2011-05-06 17:37 ` Marko Ristola [this message]
2011-05-10 21:30 ` Adrian C.
2011-05-11 12:32 ` AW: " Christoph Pinkl
2011-05-13 14:23 ` Christoph Pinkl
2011-05-21 1:15 ` Adrian C.
2011-05-21 7:04 ` Adrian C.
2011-05-21 7:23 ` Adrian C.
2011-05-21 16:19 ` Marko Ristola
2011-05-22 18:20 ` AW: " Christoph Pinkl
2011-05-23 0:02 ` Adrian C.
2011-07-14 7:59 ` D. R.
-- strict thread matches above, loose matches on Subject: below --
2011-02-28 17:26 Jonas Hanschke
2011-03-01 18:01 ` Marko Ristola
2011-03-02 9:12 ` Jonas Hanschke
2011-03-02 20:41 ` Marko Ristola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DC431C6.1010605@kolumbus.fi \
--to=marko.ristola@kolumbus.fi \
--cc=anrxc@sysphere.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox