From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ey0-f174.google.com ([209.85.215.174]:45902 "EHLO mail-ey0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756792Ab1ELN17 (ORCPT ); Thu, 12 May 2011 09:27:59 -0400 Received: by eyx24 with SMTP id 24so422326eyx.19 for ; Thu, 12 May 2011 06:27:58 -0700 (PDT) Message-ID: <4DCBE059.8030906@gmail.com> Date: Thu, 12 May 2011 15:27:53 +0200 From: Per Kofod MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Help needed: Anysee E30C Plus (DVB-C Tuner) Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-ID: Sender: Mauro Carvalho Chehab Hi I am new to this mailing list, so bare with me if this have been asked before. I have just bought an Anysee E30C Plus, as I had read, that this device is supported in Linux, my plan is building a Mythtv media center, to replace my old harddisk recorder. However I cannot get it to work, and then I read thatt the newest version might not work, and that I should join this list. I have tried to compile a new kernel with the newest dvb stuff from the git repository, just to make sure, that I have the newest drivers. I have alsio blacklistet the zl10353 module to avoid the device being loaded as an DVB-T device (which it is not, it is a cable only version). What information do you need me to obtain, or do you have a hint to how I might get this working? The device is reconnized OK as seen here from dmesg: [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 [ 11.391192] IR NEC protocol handler initialized [ 11.412221] IR RC5(x) protocol handler initialized [ 11.412611] DVB: Unable to find symbol zl10353_attach() [ 11.414527] DVB: Unable to find symbol zl10353_attach() [ 11.417536] DVB: registering adapter 1 frontend 0 (Philips TDA10023 DVB-C)... [ 11.430950] IR RC6 protocol handler initialized [ 11.553821] IR JVC protocol handler initialized [ 11.555642] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/input/input6 [ 11.555682] dvb-usb: schedule remote query interval to 200 msecs. [ 11.555689] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected. [ 11.557207] usbcore: registered new interface driver dvb_usb_anysee [ 11.569445] IR Sony protocol handler initialized [ 11.584259] lirc_dev: IR Remote Control driver registered, major 251 [ 11.586747] IR LIRC bridge handler initialized but lsusb reports this as an DVB-T Device: tux3:~ # lsusb -s 002:002 -v Bus 002 Device 002: ID 1c73:861f AMT Anysee E30 USB 2.0 DVB-T Receiver Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1c73 AMT idProduct 0x861f Anysee E30 USB 2.0 DVB-T Receiver bcdDevice 1.00 iManufacturer 1 AMT.CO.KR iProduct 2 anysee-FA(LP) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 83 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled The problem is, that I cannot get it to tune into any frequency: using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' initial transponder 143000000 6875000 0 3 initial transponder 156000000 6875000 0 3 initial transponder 378000000 6875000 0 3 initial transponder 394000000 6875000 0 3 initial transponder 442000000 6875000 0 3 initial transponder 490000000 6875000 0 3 initial transponder 498000000 6875000 0 3 initial transponder 514000000 6875000 0 3 initial transponder 530000000 6875000 0 3 initial transponder 538000000 6875000 0 3 initial transponder 554000000 6875000 0 3 initial transponder 570000000 6875000 0 3 initial transponder 578000000 6875000 0 3 initial transponder 618000000 6875000 0 3 initial transponder 626000000 6875000 0 3 initial transponder 714000000 6875000 0 3 initial transponder 730000000 6875000 0 3 initial transponder 770000000 6875000 0 3 initial transponder 786000000 6875000 0 3 initial transponder 794000000 6875000 0 3 >>> tune to: 143000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: >>> tuning failed!!! >>> tune to: 143000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 156000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: >>> tuning failed!!! >>> tune to: 156000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 378000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: >>> tuning failed!!! ETC Rgds Per