From: Antti Palosaari <crope@iki.fi>
To: Per Kofod <per.s.kofod@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: Help needed: Anysee E30C Plus (DVB-C Tuner)
Date: Thu, 12 May 2011 20:33:16 +0300 [thread overview]
Message-ID: <4DCC19DC.2020006@iki.fi> (raw)
In-Reply-To: <4DCBF044.2070504@gmail.com>
Thanks for the report. I have now following matrix:
not working:
OpenSuSE 11.4 Kernel 2.6.37
Ubuntu 11.4 Kernel 2.6.38
working:
Fedora 14 Kernel 2.6.35
regards
Antti
On 05/12/2011 05:35 PM, Per Kofod wrote:
> Thanks, that worked. Actually I am not running ubuntu on this PC; but
> OpenSuSE 11.4;
> but I was planninh using Mythbuntu far my media center.
>
> Thanks a lot.
>
> Cheers Per
>
> On 05/12/2011 04:08 PM, Antti Palosaari wrote:
>> On 05/12/2011 04:27 PM, Per Kofod wrote:
>>> Hi
>>>
>>> I am new to this mailing list, so bare with me if this have been asked
>>> before.
>>>
>>> I have just bought an Anysee E30C Plus, as I had read, that this device
>>> is supported
>>> in Linux, my plan is building a Mythtv media center, to replace my old
>>> harddisk recorder.
>>>
>>> However I cannot get it to work, and then I read thatt the newest
>>> version might not work,
>>> and that I should join this list.
>>>
>>> I have tried to compile a new kernel with the newest dvb stuff from the
>>> git repository, just
>>> to make sure, that I have the newest drivers. I have alsio blacklistet
>>> the zl10353 module
>>> to avoid the device being loaded as an DVB-T device (which it is not, it
>>> is a cable only version).
>>>
>>> What information do you need me to obtain, or do you have a hint to how
>>> I might get this working?
>>>
>>> The device is reconnized OK as seen here from dmesg:
>>>
>>> [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
>>> [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to
>>> the software demuxer.
>>> [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0)
>>> [ 11.356661] anysee: firmware version:0.1.2 hardware id:15
>>
>>
>> For the some reason hardware ID 15 does not work on latest Ubuntu
>> 11.04. That is basically E30 Combo Plus and newer E30 C Plus, which is
>> same device as E30 Combo Plus but without DVB-T demod.
>>
>> Install latest drivers and it will work. And I hope someone have time
>> to examine why it does not work anymore out-of-the-box in Ubuntu 11.04.
>>
>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
>>
>>
>>
>> Antti
>>
>
--
http://palosaari.fi/
prev parent reply other threads:[~2011-05-12 17:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-12 13:27 Help needed: Anysee E30C Plus (DVB-C Tuner) Per Kofod
2011-05-12 14:08 ` Antti Palosaari
2011-05-12 14:35 ` Per Kofod
2011-05-12 17:33 ` Antti Palosaari [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DCC19DC.2020006@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=per.s.kofod@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox