From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:51686 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757448Ab1ELRdS (ORCPT ); Thu, 12 May 2011 13:33:18 -0400 Message-ID: <4DCC19DC.2020006@iki.fi> Date: Thu, 12 May 2011 20:33:16 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Per Kofod CC: linux-media@vger.kernel.org Subject: Re: Help needed: Anysee E30C Plus (DVB-C Tuner) References: <4DCBE059.8030906@gmail.com> <4DCBE9F3.2090209@iki.fi> <4DCBF044.2070504@gmail.com> In-Reply-To: <4DCBF044.2070504@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-ID: Sender: Mauro Carvalho Chehab Thanks for the report. I have now following matrix: not working: OpenSuSE 11.4 Kernel 2.6.37 Ubuntu 11.4 Kernel 2.6.38 working: Fedora 14 Kernel 2.6.35 regards Antti On 05/12/2011 05:35 PM, Per Kofod wrote: > Thanks, that worked. Actually I am not running ubuntu on this PC; but > OpenSuSE 11.4; > but I was planninh using Mythbuntu far my media center. > > Thanks a lot. > > Cheers Per > > On 05/12/2011 04:08 PM, Antti Palosaari wrote: >> On 05/12/2011 04:27 PM, Per Kofod wrote: >>> Hi >>> >>> I am new to this mailing list, so bare with me if this have been asked >>> before. >>> >>> I have just bought an Anysee E30C Plus, as I had read, that this device >>> is supported >>> in Linux, my plan is building a Mythtv media center, to replace my old >>> harddisk recorder. >>> >>> However I cannot get it to work, and then I read thatt the newest >>> version might not work, >>> and that I should join this list. >>> >>> I have tried to compile a new kernel with the newest dvb stuff from the >>> git repository, just >>> to make sure, that I have the newest drivers. I have alsio blacklistet >>> the zl10353 module >>> to avoid the device being loaded as an DVB-T device (which it is not, it >>> is a cable only version). >>> >>> What information do you need me to obtain, or do you have a hint to how >>> I might get this working? >>> >>> The device is reconnized OK as seen here from dmesg: >>> >>> [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. >>> [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to >>> the software demuxer. >>> [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) >>> [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 >> >> >> For the some reason hardware ID 15 does not work on latest Ubuntu >> 11.04. That is basically E30 Combo Plus and newer E30 C Plus, which is >> same device as E30 Combo Plus but without DVB-T demod. >> >> Install latest drivers and it will work. And I hope someone have time >> to examine why it does not work anymore out-of-the-box in Ubuntu 11.04. >> >> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers >> >> >> >> Antti >> > -- http://palosaari.fi/