From: Antti Palosaari <crope@iki.fi>
To: wallak@free.fr
Cc: linux-media@vger.kernel.org
Subject: Re: AverMedia A306 (cx23385, xc3028, af9013) (A577 too ?)
Date: Fri, 20 May 2011 00:50:08 +0300 [thread overview]
Message-ID: <4DD59090.3020900@iki.fi> (raw)
In-Reply-To: <1305839612.4dd587fc20a03@imp.free.fr>
On 05/20/2011 12:13 AM, wallak@free.fr wrote:
> I've tried to use my A306 board on my system. All the main chips are fully
> supported by linux.
>
> At this stage the CX23385 and the tuner: xc3028 seem to respond properly. But
> the DVB-T chip (af9013) is silent. Nevertheless both chips are visible on the
> I2C bus.
You should get I2C connection to chip and after that load firmware.
> I've no full datasheet of theses chips. with exception of the af9013 where this
> information is available:
> http://wenku.baidu.com/view/42240f72f242336c1eb95e08.html
Those documents are rather useless. There is few versions of Linux
AF9015 driver around the net, which are rather near sample SDK code. Try
to find one.
> At this stage the CLK signal of the DVB-T chip may be missing or something is
> wrong elsewhere.
>
> If you have the datasheets... Any help will be appreciated.
>
>
> Best Regards,
> Wallak.
>
Antti
--
http://palosaari.fi/
next prev parent reply other threads:[~2011-05-19 21:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <S932606Ab1ESVJJ/20110519210909Z+86@vger.kernel.org>
2011-05-19 21:13 ` AverMedia A306 (cx23385, xc3028, af9013) (A577 too ?) wallak
2011-05-19 21:50 ` Antti Palosaari [this message]
2011-06-03 16:42 ` Daniel Gimpelevich
2011-06-04 15:37 ` wallak
2011-06-04 18:03 ` Daniel Gimpelevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DD59090.3020900@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=wallak@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox