public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: abraham.manu@gmail.com
Cc: Florent AUDEBERT <florent.audebert@anevia.com>,
	linux-media@vger.kernel.org,
	Florent Audebert <faudebert@anevia.com>
Subject: Re: [PATCH] stb0899: Removed an extra byte sent at init on DiSEqC bus
Date: Wed, 01 Jun 2011 10:57:05 -0300	[thread overview]
Message-ID: <4DE64531.2050301@redhat.com> (raw)
In-Reply-To: <4CBDC1CC.6030704@gmail.com>

Em 19-10-2010 14:05, Mauro Carvalho Chehab escreveu:
> Em 19-10-2010 10:55, Florent AUDEBERT escreveu:
>> On 06/11/2010 06:01 PM, Florent AUDEBERT wrote:
>>> I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC
>>> tool analyzer.
>>>
>>> I removed the register from initialization table and all seem to go well
>>> (at least for my KNC board).
>>
>> Hi,
>>
>> This old small patch had been marked superseded on patchwork[1].
>>
>> Is there an non-obvious case when patches go superseded ? Perhaps I missed
>> something but it seems to me no other patch replaced it.
> 
> This is one of the bad things with patchwork: there's no "reason" field associated
> to a status change, nor it marks when the status were changed.
> 
> A search on my linux-media box, showed that this patch were there, waiting for
> Manu review, at the email I sent on Jul, 6 2010. The patch still applies, and
> I didn't find any reply from Manu giving any feedback about it.
> 
> So, I'm re-tagging it as under review.
> 
> Manu, any comments about this patch (and the other remaining patches that we're
> waiting fro your review) ?

Manu,

Please ack or nack this patch. It was sent about 1,5 years ago! if you don't
comment, I'll assume that this patch is ok and I'll apply it.

Thanks,
Mauro.


Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: stb0899: Removed an extra byte sent at init on DiSEqC bus
Date: Fri, 11 Jun 2010 16:01:25 -0000
From: Florent AUDEBERT <florent.audebert@anevia.com>
X-Patchwork-Id: 105621
Message-Id: <4C125DD5.6060604@anevia.com>
To: linux-media@vger.kernel.org
Cc: abraham.manu@gmail.com, Florent Audebert <faudebert@anevia.com>


diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 6681ac1..9710e7b 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -40,7 +40,6 @@ static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
 	{ STB0899_DISRX_ST0     	, 0x04 },
 	{ STB0899_DISRX_ST1     	, 0x00 },
 	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISFIFO       	, 0x00 },
 	{ STB0899_DISSTATUS		, 0x20 },
 	{ STB0899_DISF22        	, 0x99 },
 	{ STB0899_DISF22RX      	, 0xa8 },
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index d1aa2bc..7bb1f28 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -51,7 +51,6 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
 	{ STB0899_DISRX_ST0     	, 0x04 },
 	{ STB0899_DISRX_ST1     	, 0x00 },
 	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISFIFO       	, 0x00 },
 	{ STB0899_DISSTATUS		, 0x20 },
 	{ STB0899_DISF22        	, 0x99 },
 	{ STB0899_DISF22RX      	, 0xa8 },
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 983672a..b697af4 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -896,7 +896,6 @@ static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
 	{ STB0899_DISRX_ST0		, 0x04 },
 	{ STB0899_DISRX_ST1		, 0x00 },
 	{ STB0899_DISPARITY		, 0x00 },
-	{ STB0899_DISFIFO		, 0x00 },
 	{ STB0899_DISSTATUS		, 0x20 },
 	{ STB0899_DISF22		, 0x8c },
 	{ STB0899_DISF22RX		, 0x9a },
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 13ac9e3..da5a72c 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -1046,7 +1046,6 @@ static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
 	{ STB0899_DISRX_ST0     	, 0x04 },
 	{ STB0899_DISRX_ST1     	, 0x00 },
 	{ STB0899_DISPARITY     	, 0x00 },
-	{ STB0899_DISFIFO       	, 0x00 },
 	{ STB0899_DISSTATUS		, 0x20 },
 	{ STB0899_DISF22        	, 0x8c },
 	{ STB0899_DISF22RX      	, 0x9a },


  reply	other threads:[~2011-06-01 13:57 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-11 16:01 [PATCH] stb0899: Removed an extra byte sent at init on DiSEqC bus Florent AUDEBERT
2010-10-19 12:55 ` Florent AUDEBERT
2010-10-19 16:05   ` Mauro Carvalho Chehab
2011-06-01 13:57     ` Mauro Carvalho Chehab [this message]
2011-06-01 16:24       ` Manu Abraham
2011-06-01 18:56         ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DE64531.2050301@redhat.com \
    --to=mchehab@redhat.com \
    --cc=abraham.manu@gmail.com \
    --cc=faudebert@anevia.com \
    --cc=florent.audebert@anevia.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox