XC4000: removed redundant tuner reset

["istvan_v@mailbox.hu" <istvan_v@mailbox.hu>]

[-- Attachment #1: Type: text/plain, Size: 319 bytes --]

This patch causes the tuner reset command to be ignored in the firmware
code, since this only happens when the BASE/INIT1 firmware is loaded by
check_firmware(), and in that case check_firmware() already calls the
reset callback before starting to load the firmware.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>


[-- Attachment #2: xc4000_noreset.patch --]
[-- Type: text/x-patch, Size: 704 bytes --]

diff -uNr xc4000_orig/drivers/media/common/tuners/xc4000.c xc4000/drivers/media/common/tuners/xc4000.c
--- xc4000_orig/drivers/media/common/tuners/xc4000.c	2011-06-04 16:30:28.000000000 +0200
+++ xc4000/drivers/media/common/tuners/xc4000.c	2011-06-04 16:35:17.000000000 +0200
@@ -338,10 +338,12 @@
 		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
 		if (len == 0x0000) {
 			/* RESET command */
-			result = xc4000_TunerReset(fe);
 			index += 2;
+#if 0			/* not needed, as already called by check_firmware() */
+			result = xc4000_TunerReset(fe);
 			if (result != XC_RESULT_SUCCESS)
 				return result;
+#endif
 		} else if (len & 0x8000) {
 			/* WAIT command */
 			xc_wait(len & 0x7FFF);