* [PATCH 1/2] OMAP_VOUT: CLEANUP: Move some functions and macros from omap_vout
2011-05-27 7:01 [PATCH 0/2] OMAP_VOUT: Allow omap_vout to build without VRFB Archit Taneja
@ 2011-05-27 7:01 ` Archit Taneja
2011-06-07 9:05 ` Hiremath, Vaibhav
2011-05-27 7:01 ` [PATCH 2/2] OMAP_VOUT: Create separate file for VRFB related API's Archit Taneja
1 sibling, 1 reply; 9+ messages in thread
From: Archit Taneja @ 2011-05-27 7:01 UTC (permalink / raw)
To: linux-media; +Cc: hvaibhav, Archit Taneja
Move some inline functions from omap_vout.c to omap_voutdef.h and independent
functions like omap_vout_alloc_buffer/omap_vout_free_buffer to omap_voutlib.c.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/media/video/omap/omap_vout.c | 109 -------------------------------
drivers/media/video/omap/omap_voutdef.h | 62 +++++++++++++++++
drivers/media/video/omap/omap_voutlib.c | 44 ++++++++++++
drivers/media/video/omap/omap_voutlib.h | 2 +
4 files changed, 108 insertions(+), 109 deletions(-)
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4ada9be..6433e7b 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -35,17 +35,14 @@
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/videodev2.h>
-#include <linux/slab.h>
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <plat/dma.h>
-#include <plat/vram.h>
#include <plat/vrfb.h>
#include <video/omapdss.h>
@@ -56,7 +53,6 @@ MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
MODULE_LICENSE("GPL");
-
/* Driver Configuration macros */
#define VOUT_NAME "omap_vout"
@@ -65,31 +61,6 @@ enum omap_vout_channels {
OMAP_VIDEO2,
};
-enum dma_channel_state {
- DMA_CHAN_NOT_ALLOTED,
- DMA_CHAN_ALLOTED,
-};
-
-#define QQVGA_WIDTH 160
-#define QQVGA_HEIGHT 120
-
-/* Max Resolution supported by the driver */
-#define VID_MAX_WIDTH 1280 /* Largest width */
-#define VID_MAX_HEIGHT 720 /* Largest height */
-
-/* Mimimum requirement is 2x2 for DSS */
-#define VID_MIN_WIDTH 2
-#define VID_MIN_HEIGHT 2
-
-/* 2048 x 2048 is max res supported by OMAP display controller */
-#define MAX_PIXELS_PER_LINE 2048
-
-#define VRFB_TX_TIMEOUT 1000
-#define VRFB_NUM_BUFS 4
-
-/* Max buffer size tobe allocated during init */
-#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
-
static struct videobuf_queue_ops video_vbq_ops;
/* Variables configurable through module params*/
static u32 video1_numbuffers = 3;
@@ -172,49 +143,6 @@ const static struct v4l2_fmtdesc omap_formats[] = {
#define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats))
/*
- * Allocate buffers
- */
-static unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
-{
- u32 order, size;
- unsigned long virt_addr, addr;
-
- size = PAGE_ALIGN(buf_size);
- order = get_order(size);
- virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order);
- addr = virt_addr;
-
- if (virt_addr) {
- while (size > 0) {
- SetPageReserved(virt_to_page(addr));
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- }
- *phys_addr = (u32) virt_to_phys((void *) virt_addr);
- return virt_addr;
-}
-
-/*
- * Free buffers
- */
-static void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
-{
- u32 order, size;
- unsigned long addr = virtaddr;
-
- size = PAGE_ALIGN(buf_size);
- order = get_order(size);
-
- while (size > 0) {
- ClearPageReserved(virt_to_page(addr));
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- free_pages((unsigned long) virtaddr, order);
-}
-
-/*
* Function for allocating video buffers
*/
static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
@@ -369,43 +297,6 @@ static void omap_vout_release_vrfb(struct omap_vout_device *vout)
}
/*
- * Return true if rotation is 90 or 270
- */
-static inline int rotate_90_or_270(const struct omap_vout_device *vout)
-{
- return (vout->rotation == dss_rotation_90_degree ||
- vout->rotation == dss_rotation_270_degree);
-}
-
-/*
- * Return true if rotation is enabled
- */
-static inline int rotation_enabled(const struct omap_vout_device *vout)
-{
- return vout->rotation || vout->mirror;
-}
-
-/*
- * Reverse the rotation degree if mirroring is enabled
- */
-static inline int calc_rotation(const struct omap_vout_device *vout)
-{
- if (!vout->mirror)
- return vout->rotation;
-
- switch (vout->rotation) {
- case dss_rotation_90_degree:
- return dss_rotation_270_degree;
- case dss_rotation_270_degree:
- return dss_rotation_90_degree;
- case dss_rotation_180_degree:
- return dss_rotation_0_degree;
- default:
- return dss_rotation_180_degree;
- }
-}
-
-/*
* Free the V4L2 buffers
*/
static void omap_vout_free_buffers(struct omap_vout_device *vout)
diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h
index 659497b..31e6261 100644
--- a/drivers/media/video/omap/omap_voutdef.h
+++ b/drivers/media/video/omap/omap_voutdef.h
@@ -27,6 +27,31 @@
#define MAX_DISPLAYS 3
#define MAX_MANAGERS 3
+#define QQVGA_WIDTH 160
+#define QQVGA_HEIGHT 120
+
+/* Max Resolution supported by the driver */
+#define VID_MAX_WIDTH 1280 /* Largest width */
+#define VID_MAX_HEIGHT 720 /* Largest height */
+
+/* Mimimum requirement is 2x2 for DSS */
+#define VID_MIN_WIDTH 2
+#define VID_MIN_HEIGHT 2
+
+/* 2048 x 2048 is max res supported by OMAP display controller */
+#define MAX_PIXELS_PER_LINE 2048
+
+#define VRFB_TX_TIMEOUT 1000
+#define VRFB_NUM_BUFS 4
+
+/* Max buffer size tobe allocated during init */
+#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
+
+enum dma_channel_state {
+ DMA_CHAN_NOT_ALLOTED,
+ DMA_CHAN_ALLOTED,
+};
+
/* Enum for Rotation
* DSS understands rotation in 0, 1, 2, 3 context
* while V4L2 driver understands it as 0, 90, 180, 270
@@ -144,4 +169,41 @@ struct omap_vout_device {
int io_allowed;
};
+
+/*
+ * Return true if rotation is 90 or 270
+ */
+static inline int rotate_90_or_270(const struct omap_vout_device *vout)
+{
+ return (vout->rotation == dss_rotation_90_degree ||
+ vout->rotation == dss_rotation_270_degree);
+}
+
+/*
+ * Return true if rotation is enabled
+ */
+static inline int rotation_enabled(const struct omap_vout_device *vout)
+{
+ return vout->rotation || vout->mirror;
+}
+
+/*
+ * Reverse the rotation degree if mirroring is enabled
+ */
+static inline int calc_rotation(const struct omap_vout_device *vout)
+{
+ if (!vout->mirror)
+ return vout->rotation;
+
+ switch (vout->rotation) {
+ case dss_rotation_90_degree:
+ return dss_rotation_270_degree;
+ case dss_rotation_270_degree:
+ return dss_rotation_90_degree;
+ case dss_rotation_180_degree:
+ return dss_rotation_0_degree;
+ default:
+ return dss_rotation_180_degree;
+ }
+}
#endif /* ifndef OMAP_VOUTDEF_H */
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 2aa6a76..c28ef05 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -24,6 +24,8 @@
#include <linux/types.h>
#include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+
#include <plat/cpu.h>
MODULE_AUTHOR("Texas Instruments");
@@ -291,3 +293,45 @@ void omap_vout_new_format(struct v4l2_pix_format *pix,
}
EXPORT_SYMBOL_GPL(omap_vout_new_format);
+/*
+ * Allocate buffers
+ */
+unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
+{
+ u32 order, size;
+ unsigned long virt_addr, addr;
+
+ size = PAGE_ALIGN(buf_size);
+ order = get_order(size);
+ virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order);
+ addr = virt_addr;
+
+ if (virt_addr) {
+ while (size > 0) {
+ SetPageReserved(virt_to_page(addr));
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ }
+ *phys_addr = (u32) virt_to_phys((void *) virt_addr);
+ return virt_addr;
+}
+
+/*
+ * Free buffers
+ */
+void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
+{
+ u32 order, size;
+ unsigned long addr = virtaddr;
+
+ size = PAGE_ALIGN(buf_size);
+ order = get_order(size);
+
+ while (size > 0) {
+ ClearPageReserved(virt_to_page(addr));
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ free_pages((unsigned long) virtaddr, order);
+}
diff --git a/drivers/media/video/omap/omap_voutlib.h b/drivers/media/video/omap/omap_voutlib.h
index a60b16e..1d722be 100644
--- a/drivers/media/video/omap/omap_voutlib.h
+++ b/drivers/media/video/omap/omap_voutlib.h
@@ -30,5 +30,7 @@ extern int omap_vout_new_window(struct v4l2_rect *crop,
extern void omap_vout_new_format(struct v4l2_pix_format *pix,
struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop,
struct v4l2_window *win);
+extern unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr);
+extern void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size);
#endif /* #ifndef OMAP_VOUTLIB_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] OMAP_VOUT: Create separate file for VRFB related API's
2011-05-27 7:01 [PATCH 0/2] OMAP_VOUT: Allow omap_vout to build without VRFB Archit Taneja
2011-05-27 7:01 ` [PATCH 1/2] OMAP_VOUT: CLEANUP: Move some functions and macros from omap_vout Archit Taneja
@ 2011-05-27 7:01 ` Archit Taneja
2011-06-13 4:46 ` Archit Taneja
1 sibling, 1 reply; 9+ messages in thread
From: Archit Taneja @ 2011-05-27 7:01 UTC (permalink / raw)
To: linux-media; +Cc: hvaibhav, Archit Taneja
Introduce omap_vout_vrfb.c and omap_vout_vrfb.h, for all VRFB related API's,
making OMAP_VOUT driver independent from VRFB. This is required for OMAP4 DSS,
since OMAP4 doesn't have VRFB block.
Added new enum vout_rotation_type and "rotation_type" member to omapvideo_info,
this is initialized based on the arch type in omap_vout_probe. The rotation_type
var is now used to choose between vrfb and non-vrfb calls.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/media/video/omap/Kconfig | 7 +-
drivers/media/video/omap/Makefile | 1 +
drivers/media/video/omap/omap_vout.c | 453 ++++++-----------------------
drivers/media/video/omap/omap_vout_vrfb.c | 390 +++++++++++++++++++++++++
drivers/media/video/omap/omap_vout_vrfb.h | 40 +++
drivers/media/video/omap/omap_voutdef.h | 16 +
6 files changed, 536 insertions(+), 371 deletions(-)
create mode 100644 drivers/media/video/omap/omap_vout_vrfb.c
create mode 100644 drivers/media/video/omap/omap_vout_vrfb.h
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index e63233f..390ab09 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,11 +1,14 @@
+config VIDEO_OMAP2_VOUT_VRFB
+ bool
+
config VIDEO_OMAP2_VOUT
tristate "OMAP2/OMAP3 V4L2-Display driver"
depends on ARCH_OMAP2 || ARCH_OMAP3
select VIDEOBUF_GEN
select VIDEOBUF_DMA_CONTIG
select OMAP2_DSS
- select OMAP2_VRAM
- select OMAP2_VRFB
+ select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
+ select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB
default n
---help---
V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b287880..fc410b4 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -4,4 +4,5 @@
# OMAP2/3 Display driver
omap-vout-y := omap_vout.o omap_voutlib.o
+omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o
obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 6433e7b..852905c 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -48,6 +48,7 @@
#include "omap_voutlib.h"
#include "omap_voutdef.h"
+#include "omap_vout_vrfb.h"
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
@@ -143,41 +144,6 @@ const static struct v4l2_fmtdesc omap_formats[] = {
#define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats))
/*
- * Function for allocating video buffers
- */
-static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
- unsigned int *count, int startindex)
-{
- int i, j;
-
- for (i = 0; i < *count; i++) {
- if (!vout->smsshado_virt_addr[i]) {
- vout->smsshado_virt_addr[i] =
- omap_vout_alloc_buffer(vout->smsshado_size,
- &vout->smsshado_phy_addr[i]);
- }
- if (!vout->smsshado_virt_addr[i] && startindex != -1) {
- if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
- break;
- }
- if (!vout->smsshado_virt_addr[i]) {
- for (j = 0; j < i; j++) {
- omap_vout_free_buffer(
- vout->smsshado_virt_addr[j],
- vout->smsshado_size);
- vout->smsshado_virt_addr[j] = 0;
- vout->smsshado_phy_addr[j] = 0;
- }
- *count = 0;
- return -ENOMEM;
- }
- memset((void *) vout->smsshado_virt_addr[i], 0,
- vout->smsshado_size);
- }
- return 0;
-}
-
-/*
* Try format
*/
static int omap_vout_try_format(struct v4l2_pix_format *pix)
@@ -270,36 +236,9 @@ static u32 omap_vout_uservirt_to_phys(u32 virtp)
}
/*
- * Wakes up the application once the DMA transfer to VRFB space is completed.
- */
-static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
-{
- struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
-
- t->tx_status = 1;
- wake_up_interruptible(&t->wait);
-}
-
-/*
- * Release the VRFB context once the module exits
- */
-static void omap_vout_release_vrfb(struct omap_vout_device *vout)
-{
- int i;
-
- for (i = 0; i < VRFB_NUM_BUFS; i++)
- omap_vrfb_release_ctx(&vout->vrfb_context[i]);
-
- if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
- vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
- omap_free_dma(vout->vrfb_dma_tx.dma_ch);
- }
-}
-
-/*
* Free the V4L2 buffers
*/
-static void omap_vout_free_buffers(struct omap_vout_device *vout)
+void omap_vout_free_buffers(struct omap_vout_device *vout)
{
int i, numbuffers;
@@ -316,52 +255,6 @@ static void omap_vout_free_buffers(struct omap_vout_device *vout)
}
/*
- * Free VRFB buffers
- */
-static void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
-{
- int j;
-
- for (j = 0; j < VRFB_NUM_BUFS; j++) {
- omap_vout_free_buffer(vout->smsshado_virt_addr[j],
- vout->smsshado_size);
- vout->smsshado_virt_addr[j] = 0;
- vout->smsshado_phy_addr[j] = 0;
- }
-}
-
-/*
- * Allocate the buffers for the VRFB space. Data is copied from V4L2
- * buffers to the VRFB buffers using the DMA engine.
- */
-static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
- unsigned int *count, unsigned int startindex)
-{
- int i;
- bool yuv_mode;
-
- /* Allocate the VRFB buffers only if the buffers are not
- * allocated during init time.
- */
- if ((rotation_enabled(vout)) && !vout->vrfb_static_allocation)
- if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
- return -ENOMEM;
-
- if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
- vout->dss_mode == OMAP_DSS_COLOR_UYVY)
- yuv_mode = true;
- else
- yuv_mode = false;
-
- for (i = 0; i < *count; i++)
- omap_vrfb_setup(&vout->vrfb_context[i],
- vout->smsshado_phy_addr[i], vout->pix.width,
- vout->pix.height, vout->bpp, yuv_mode);
-
- return 0;
-}
-
-/*
* Convert V4L2 rotation to DSS rotation
* V4L2 understand 0, 90, 180, 270.
* Convert to 0, 1, 2 and 3 respectively for DSS
@@ -390,124 +283,38 @@ static int v4l2_rot_to_dss_rot(int v4l2_rotation,
return ret;
}
-/*
- * Calculate the buffer offsets from which the streaming should
- * start. This offset calculation is mainly required because of
- * the VRFB 32 pixels alignment with rotation.
- */
static int omap_vout_calculate_offset(struct omap_vout_device *vout)
{
- struct omap_overlay *ovl;
- enum dss_rotation rotation;
struct omapvideo_info *ovid;
- bool mirroring = vout->mirror;
- struct omap_dss_device *cur_display;
struct v4l2_rect *crop = &vout->crop;
struct v4l2_pix_format *pix = &vout->pix;
int *cropped_offset = &vout->cropped_offset;
- int vr_ps = 1, ps = 2, temp_ps = 2;
- int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+ int ps = 2, line_length = 0;
ovid = &vout->vid_info;
- ovl = ovid->overlays[0];
- /* get the display device attached to the overlay */
- if (!ovl->manager || !ovl->manager->device)
- return -1;
- cur_display = ovl->manager->device;
- rotation = calc_rotation(vout);
+ if (ovid->rotation_type == VOUT_ROT_VRFB) {
+ omap_vout_calculate_vrfb_offset(vout);
+ } else {
+ vout->line_length = line_length = pix->width;
- if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
- V4L2_PIX_FMT_UYVY == pix->pixelformat) {
- if (rotation_enabled(vout)) {
- /*
- * ps - Actual pixel size for YUYV/UYVY for
- * VRFB/Mirroring is 4 bytes
- * vr_ps - Virtually pixel size for YUYV/UYVY is
- * 2 bytes
- */
+ if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+ V4L2_PIX_FMT_UYVY == pix->pixelformat)
+ ps = 2;
+ else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat)
ps = 4;
- vr_ps = 2;
- } else {
- ps = 2; /* otherwise the pixel size is 2 byte */
- }
- } else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
- ps = 4;
- } else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
- ps = 3;
- }
- vout->ps = ps;
- vout->vr_ps = vr_ps;
-
- if (rotation_enabled(vout)) {
- line_length = MAX_PIXELS_PER_LINE;
- ctop = (pix->height - crop->height) - crop->top;
- cleft = (pix->width - crop->width) - crop->left;
- } else {
- line_length = pix->width;
- }
- vout->line_length = line_length;
- switch (rotation) {
- case dss_rotation_90_degree:
- offset = vout->vrfb_context[0].yoffset *
- vout->vrfb_context[0].bytespp;
- temp_ps = ps / vr_ps;
- if (mirroring == 0) {
- *cropped_offset = offset + line_length *
- temp_ps * cleft + crop->top * temp_ps;
- } else {
- *cropped_offset = offset + line_length * temp_ps *
- cleft + crop->top * temp_ps + (line_length *
- ((crop->width / (vr_ps)) - 1) * ps);
- }
- break;
- case dss_rotation_180_degree:
- offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
- vout->vrfb_context[0].bytespp) +
- (vout->vrfb_context[0].xoffset *
- vout->vrfb_context[0].bytespp));
- if (mirroring == 0) {
- *cropped_offset = offset + (line_length * ps * ctop) +
- (cleft / vr_ps) * ps;
+ else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat)
+ ps = 3;
- } else {
- *cropped_offset = offset + (line_length * ps * ctop) +
- (cleft / vr_ps) * ps + (line_length *
- (crop->height - 1) * ps);
- }
- break;
- case dss_rotation_270_degree:
- offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
- vout->vrfb_context[0].bytespp;
- temp_ps = ps / vr_ps;
- if (mirroring == 0) {
- *cropped_offset = offset + line_length *
- temp_ps * crop->left + ctop * ps;
- } else {
- *cropped_offset = offset + line_length *
- temp_ps * crop->left + ctop * ps +
- (line_length * ((crop->width / vr_ps) - 1) *
- ps);
- }
- break;
- case dss_rotation_0_degree:
- if (mirroring == 0) {
- *cropped_offset = (line_length * ps) *
- crop->top + (crop->left / vr_ps) * ps;
- } else {
- *cropped_offset = (line_length * ps) *
- crop->top + (crop->left / vr_ps) * ps +
- (line_length * (crop->height - 1) * ps);
- }
- break;
- default:
- *cropped_offset = (line_length * ps * crop->top) /
- vr_ps + (crop->left * ps) / vr_ps +
- ((crop->width / vr_ps) - 1) * ps;
- break;
+ vout->ps = ps;
+
+ *cropped_offset = (line_length * ps) *
+ crop->top + crop->left * ps;
}
+
v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n",
- __func__, *cropped_offset);
+ __func__, vout->cropped_offset);
+
return 0;
}
@@ -845,6 +652,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
int startindex = 0, i, j;
u32 phy_addr = 0, virt_addr = 0;
struct omap_vout_device *vout = q->priv_data;
+ struct omapvideo_info *ovid = &vout->vid_info;
if (!vout)
return -EINVAL;
@@ -857,13 +665,10 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex)
*count = startindex;
- if ((rotation_enabled(vout)) && *count > VRFB_NUM_BUFS)
- *count = VRFB_NUM_BUFS;
-
- /* If rotation is enabled, allocate memory for VRFB space also */
- if (rotation_enabled(vout))
+ if (ovid->rotation_type == VOUT_ROT_VRFB) {
if (omap_vout_vrfb_buffer_setup(vout, count, startindex))
return -ENOMEM;
+ }
if (V4L2_MEMORY_MMAP != vout->memory)
return 0;
@@ -879,8 +684,11 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
virt_addr = omap_vout_alloc_buffer(vout->buffer_size,
&phy_addr);
if (!virt_addr) {
- if (!rotation_enabled(vout))
+ if (ovid->rotation_type == VOUT_ROT_NONE) {
break;
+ } else {
+ if (!rotation_enabled(vout))
+ break;
/* Free the VRFB buffers if no space for V4L2 buffers */
for (j = i; j < *count; j++) {
omap_vout_free_buffer(
@@ -888,6 +696,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
vout->smsshado_size);
vout->smsshado_virt_addr[j] = 0;
vout->smsshado_phy_addr[j] = 0;
+ }
}
}
vout->buf_virt_addr[i] = virt_addr;
@@ -900,9 +709,9 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
/*
* Free the V4L2 buffers additionally allocated than default
- * number of buffers and free all the VRFB buffers
+ * number of buffers
*/
-static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
+static void omap_vout_free_extra_buffers(struct omap_vout_device *vout)
{
int num_buffers = 0, i;
@@ -917,20 +726,6 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
vout->buf_virt_addr[i] = 0;
vout->buf_phy_addr[i] = 0;
}
- /* Free the VRFB buffers only if they are allocated
- * during reqbufs. Don't free if init time allocated
- */
- if (!vout->vrfb_static_allocation) {
- for (i = 0; i < VRFB_NUM_BUFS; i++) {
- if (vout->smsshado_virt_addr[i]) {
- omap_vout_free_buffer(
- vout->smsshado_virt_addr[i],
- vout->smsshado_size);
- vout->smsshado_virt_addr[i] = 0;
- vout->smsshado_phy_addr[i] = 0;
- }
- }
- }
vout->buffer_allocated = num_buffers;
}
@@ -942,16 +737,11 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
* buffer into VRFB memory space before giving it to the DSS.
*/
static int omap_vout_buffer_prepare(struct videobuf_queue *q,
- struct videobuf_buffer *vb,
- enum v4l2_field field)
+ struct videobuf_buffer *vb,
+ enum v4l2_field field)
{
- dma_addr_t dmabuf;
- struct vid_vrfb_dma *tx;
- enum dss_rotation rotation;
struct omap_vout_device *vout = q->priv_data;
- u32 dest_frame_index = 0, src_element_index = 0;
- u32 dest_element_index = 0, src_frame_index = 0;
- u32 elem_count = 0, frame_count = 0, pixsize = 2;
+ struct omapvideo_info *ovid = &vout->vid_info;
if (VIDEOBUF_NEEDS_INIT == vb->state) {
vb->width = vout->pix.width;
@@ -973,63 +763,10 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
}
- if (!rotation_enabled(vout))
+ if (ovid->rotation_type == VOUT_ROT_VRFB)
+ return omap_vout_prepare_vrfb(vout, vb);
+ else
return 0;
-
- dmabuf = vout->buf_phy_addr[vb->i];
- /* If rotation is enabled, copy input buffer into VRFB
- * memory space using DMA. We are copying input buffer
- * into VRFB memory space of desired angle and DSS will
- * read image VRFB memory for 0 degree angle
- */
- pixsize = vout->bpp * vout->vrfb_bpp;
- /*
- * DMA transfer in double index mode
- */
-
- /* Frame index */
- dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
- (vout->pix.width * vout->bpp)) + 1;
-
- /* Source and destination parameters */
- src_element_index = 0;
- src_frame_index = 0;
- dest_element_index = 1;
- /* Number of elements per frame */
- elem_count = vout->pix.width * vout->bpp;
- frame_count = vout->pix.height;
- tx = &vout->vrfb_dma_tx;
- tx->tx_status = 0;
- omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
- (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
- tx->dev_id, 0x0);
- /* src_port required only for OMAP1 */
- omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
- dmabuf, src_element_index, src_frame_index);
- /*set dma source burst mode for VRFB */
- omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- rotation = calc_rotation(vout);
-
- /* dest_port required only for OMAP1 */
- omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
- vout->vrfb_context[vb->i].paddr[0], dest_element_index,
- dest_frame_index);
- /*set dma dest burst mode for VRFB */
- omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
-
- omap_start_dma(tx->dma_ch);
- interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
-
- if (tx->tx_status == 0) {
- omap_stop_dma(tx->dma_ch);
- return -EINVAL;
- }
- /* Store buffers physical address into an array. Addresses
- * from this array will be used to configure DSS */
- vout->queued_buf_addr[vb->i] = (u8 *)
- vout->vrfb_context[vb->i].paddr[rotation];
- return 0;
}
/*
@@ -1173,7 +910,15 @@ static int omap_vout_release(struct file *file)
"Unable to apply changes\n");
/* Free all buffers */
- omap_vout_free_allbuffers(vout);
+ omap_vout_free_extra_buffers(vout);
+
+ /* Free the VRFB buffers only if they are allocated
+ * during reqbufs. Don't free if init time allocated
+ */
+ if (ovid->rotation_type == VOUT_ROT_VRFB) {
+ if (!vout->vrfb_static_allocation)
+ omap_vout_free_vrfb_buffers(vout);
+ }
videobuf_mmap_free(q);
/* Even if apply changes fails we should continue
@@ -1600,9 +1345,17 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
switch (a->id) {
case V4L2_CID_ROTATE:
{
+ struct omapvideo_info *ovid;
int rotation = a->value;
+ ovid = &vout->vid_info;
+
mutex_lock(&vout->lock);
+ if (rotation && ovid->rotation_type == VOUT_ROT_NONE) {
+ mutex_unlock(&vout->lock);
+ ret = -ERANGE;
+ break;
+ }
if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
mutex_unlock(&vout->lock);
@@ -1658,6 +1411,11 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
ovl = ovid->overlays[0];
mutex_lock(&vout->lock);
+ if (mirror && ovid->rotation_type == VOUT_ROT_NONE) {
+ mutex_unlock(&vout->lock);
+ ret = -ERANGE;
+ break;
+ }
if (mirror && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
mutex_unlock(&vout->lock);
@@ -2103,7 +1861,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
vout->mirror = 0;
vout->control[2].id = V4L2_CID_HFLIP;
vout->control[2].value = 0;
- vout->vrfb_bpp = 2;
+ if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+ vout->vrfb_bpp = 2;
control[1].id = V4L2_CID_BG_COLOR;
control[1].value = 0;
@@ -2135,17 +1894,15 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
int vid_num)
{
u32 numbuffers;
- int ret = 0, i, j;
- int image_width, image_height;
- struct video_device *vfd;
+ int ret = 0, i;
+ struct omapvideo_info *ovid;
struct omap_vout_device *vout;
- int static_vrfb_allocation = 0, vrfb_num_bufs = VRFB_NUM_BUFS;
struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
struct omap2video_device *vid_dev =
container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
vout = vid_dev->vouts[vid_num];
- vfd = vout->vfd;
+ ovid = &vout->vid_info;
numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers;
vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize;
@@ -2162,66 +1919,16 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
}
}
- for (i = 0; i < VRFB_NUM_BUFS; i++) {
- if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
- dev_info(&pdev->dev, ": VRFB allocation failed\n");
- for (j = 0; j < i; j++)
- omap_vrfb_release_ctx(&vout->vrfb_context[j]);
- ret = -ENOMEM;
- goto free_buffers;
- }
- }
vout->cropped_offset = 0;
- /* Calculate VRFB memory size */
- /* allocate for worst case size */
- image_width = VID_MAX_WIDTH / TILE_SIZE;
- if (VID_MAX_WIDTH % TILE_SIZE)
- image_width++;
-
- image_width = image_width * TILE_SIZE;
- image_height = VID_MAX_HEIGHT / TILE_SIZE;
-
- if (VID_MAX_HEIGHT % TILE_SIZE)
- image_height++;
-
- image_height = image_height * TILE_SIZE;
- vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
-
- /*
- * Request and Initialize DMA, for DMA based VRFB transfer
- */
- vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
- vout->vrfb_dma_tx.dma_ch = -1;
- vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
- ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
- omap_vout_vrfb_dma_tx_callback,
- (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
- if (ret < 0) {
- vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
- dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
- " video%d\n", vfd->minor);
- }
- init_waitqueue_head(&vout->vrfb_dma_tx.wait);
-
- /* Allocate VRFB buffers if selected through bootargs */
- static_vrfb_allocation = (vid_num == 0) ?
- vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
-
- /* statically allocated the VRFB buffer is done through
- commands line aruments */
- if (static_vrfb_allocation) {
- if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
- ret = -ENOMEM;
- goto release_vrfb_ctx;
- }
- vout->vrfb_static_allocation = 1;
+ if (ovid->rotation_type == VOUT_ROT_VRFB) {
+ int static_vrfb_allocation = (vid_num == 0) ?
+ vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
+ ret = omap_vout_setup_vrfb_bufs(pdev, vid_num,
+ static_vrfb_allocation);
}
- return 0;
-release_vrfb_ctx:
- for (j = 0; j < VRFB_NUM_BUFS; j++)
- omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+ return ret;
free_buffers:
for (i = 0; i < numbuffers; i++) {
@@ -2264,6 +1971,10 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
vout->vid_info.num_overlays = 1;
vout->vid_info.id = k + 1;
+ /* Set VRFB as rotation_type for omap2 and omap3 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ vout->vid_info.rotation_type = VOUT_ROT_VRFB;
+
/* Setup the default configuration for the video devices
*/
if (omap_vout_setup_video_data(vout) != 0) {
@@ -2297,7 +2008,8 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
goto success;
error2:
- omap_vout_release_vrfb(vout);
+ if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+ omap_vout_release_vrfb(vout);
omap_vout_free_buffers(vout);
error1:
video_device_release(vfd);
@@ -2318,11 +2030,13 @@ success:
static void omap_vout_cleanup_device(struct omap_vout_device *vout)
{
struct video_device *vfd;
+ struct omapvideo_info *ovid;
if (!vout)
return;
vfd = vout->vfd;
+ ovid = &vout->vid_info;
if (vfd) {
if (!video_is_registered(vfd)) {
/*
@@ -2338,14 +2052,15 @@ static void omap_vout_cleanup_device(struct omap_vout_device *vout)
video_unregister_device(vfd);
}
}
-
- omap_vout_release_vrfb(vout);
+ if (ovid->rotation_type == VOUT_ROT_VRFB) {
+ omap_vout_release_vrfb(vout);
+ /* Free the VRFB buffer if allocated
+ * init time
+ */
+ if (vout->vrfb_static_allocation)
+ omap_vout_free_vrfb_buffers(vout);
+ }
omap_vout_free_buffers(vout);
- /* Free the VRFB buffer if allocated
- * init time
- */
- if (vout->vrfb_static_allocation)
- omap_vout_free_vrfb_buffers(vout);
kfree(vout);
}
diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c
new file mode 100644
index 0000000..a48293a
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.c
@@ -0,0 +1,390 @@
+/*
+ * omap_vout_vrfb.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+
+#include <media/videobuf-dma-contig.h>
+#include <media/v4l2-device.h>
+
+#include <plat/dma.h>
+#include <plat/vrfb.h>
+
+#include "omap_voutdef.h"
+#include "omap_voutlib.h"
+
+/*
+ * Function for allocating video buffers
+ */
+static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
+ unsigned int *count, int startindex)
+{
+ int i, j;
+
+ for (i = 0; i < *count; i++) {
+ if (!vout->smsshado_virt_addr[i]) {
+ vout->smsshado_virt_addr[i] =
+ omap_vout_alloc_buffer(vout->smsshado_size,
+ &vout->smsshado_phy_addr[i]);
+ }
+ if (!vout->smsshado_virt_addr[i] && startindex != -1) {
+ if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
+ break;
+ }
+ if (!vout->smsshado_virt_addr[i]) {
+ for (j = 0; j < i; j++) {
+ omap_vout_free_buffer(
+ vout->smsshado_virt_addr[j],
+ vout->smsshado_size);
+ vout->smsshado_virt_addr[j] = 0;
+ vout->smsshado_phy_addr[j] = 0;
+ }
+ *count = 0;
+ return -ENOMEM;
+ }
+ memset((void *) vout->smsshado_virt_addr[i], 0,
+ vout->smsshado_size);
+ }
+ return 0;
+}
+
+/*
+ * Wakes up the application once the DMA transfer to VRFB space is completed.
+ */
+static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
+{
+ struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
+
+ t->tx_status = 1;
+ wake_up_interruptible(&t->wait);
+}
+
+/*
+ * Free VRFB buffers
+ */
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
+{
+ int j;
+
+ for (j = 0; j < VRFB_NUM_BUFS; j++) {
+ omap_vout_free_buffer(vout->smsshado_virt_addr[j],
+ vout->smsshado_size);
+ vout->smsshado_virt_addr[j] = 0;
+ vout->smsshado_phy_addr[j] = 0;
+ }
+}
+
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+ u32 static_vrfb_allocation)
+{
+ int ret = 0, i, j;
+ struct omap_vout_device *vout;
+ struct video_device *vfd;
+ int image_width, image_height;
+ int vrfb_num_bufs = VRFB_NUM_BUFS;
+ struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+ struct omap2video_device *vid_dev =
+ container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
+
+ vout = vid_dev->vouts[vid_num];
+ vfd = vout->vfd;
+
+ for (i = 0; i < VRFB_NUM_BUFS; i++) {
+ if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
+ dev_info(&pdev->dev, ": VRFB allocation failed\n");
+ for (j = 0; j < i; j++)
+ omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+ ret = -ENOMEM;
+ goto free_buffers;
+ }
+ }
+
+ /* Calculate VRFB memory size */
+ /* allocate for worst case size */
+ image_width = VID_MAX_WIDTH / TILE_SIZE;
+ if (VID_MAX_WIDTH % TILE_SIZE)
+ image_width++;
+
+ image_width = image_width * TILE_SIZE;
+ image_height = VID_MAX_HEIGHT / TILE_SIZE;
+
+ if (VID_MAX_HEIGHT % TILE_SIZE)
+ image_height++;
+
+ image_height = image_height * TILE_SIZE;
+ vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
+
+ /*
+ * Request and Initialize DMA, for DMA based VRFB transfer
+ */
+ vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
+ vout->vrfb_dma_tx.dma_ch = -1;
+ vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
+ ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
+ omap_vout_vrfb_dma_tx_callback,
+ (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
+ if (ret < 0) {
+ vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
+ " video%d\n", vfd->minor);
+ }
+ init_waitqueue_head(&vout->vrfb_dma_tx.wait);
+
+ /* statically allocated the VRFB buffer is done through
+ commands line aruments */
+ if (static_vrfb_allocation) {
+ if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
+ ret = -ENOMEM;
+ goto release_vrfb_ctx;
+ }
+ vout->vrfb_static_allocation = 1;
+ }
+ return 0;
+
+release_vrfb_ctx:
+ for (j = 0; j < VRFB_NUM_BUFS; j++)
+ omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+free_buffers:
+ omap_vout_free_buffers(vout);
+
+ return ret;
+}
+
+/*
+ * Release the VRFB context once the module exits
+ */
+void omap_vout_release_vrfb(struct omap_vout_device *vout)
+{
+ int i;
+
+ for (i = 0; i < VRFB_NUM_BUFS; i++)
+ omap_vrfb_release_ctx(&vout->vrfb_context[i]);
+
+ if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
+ vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ omap_free_dma(vout->vrfb_dma_tx.dma_ch);
+ }
+}
+
+/*
+ * Allocate the buffers for the VRFB space. Data is copied from V4L2
+ * buffers to the VRFB buffers using the DMA engine.
+ */
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+ unsigned int *count, unsigned int startindex)
+{
+ int i;
+ bool yuv_mode;
+
+ if (!rotation_enabled(vout))
+ return 0;
+
+ /* If rotation is enabled, allocate memory for VRFB space also */
+ *count = *count > VRFB_NUM_BUFS ? VRFB_NUM_BUFS : *count;
+
+ /* Allocate the VRFB buffers only if the buffers are not
+ * allocated during init time.
+ */
+ if (!vout->vrfb_static_allocation)
+ if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
+ return -ENOMEM;
+
+ if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
+ vout->dss_mode == OMAP_DSS_COLOR_UYVY)
+ yuv_mode = true;
+ else
+ yuv_mode = false;
+
+ for (i = 0; i < *count; i++)
+ omap_vrfb_setup(&vout->vrfb_context[i],
+ vout->smsshado_phy_addr[i], vout->pix.width,
+ vout->pix.height, vout->bpp, yuv_mode);
+
+ return 0;
+}
+
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+ struct videobuf_buffer *vb)
+{
+ dma_addr_t dmabuf;
+ struct vid_vrfb_dma *tx;
+ enum dss_rotation rotation;
+ u32 dest_frame_index = 0, src_element_index = 0;
+ u32 dest_element_index = 0, src_frame_index = 0;
+ u32 elem_count = 0, frame_count = 0, pixsize = 2;
+
+ if (!rotation_enabled(vout))
+ return 0;
+
+ dmabuf = vout->buf_phy_addr[vb->i];
+ /* If rotation is enabled, copy input buffer into VRFB
+ * memory space using DMA. We are copying input buffer
+ * into VRFB memory space of desired angle and DSS will
+ * read image VRFB memory for 0 degree angle
+ */
+ pixsize = vout->bpp * vout->vrfb_bpp;
+ /*
+ * DMA transfer in double index mode
+ */
+
+ /* Frame index */
+ dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
+ (vout->pix.width * vout->bpp)) + 1;
+
+ /* Source and destination parameters */
+ src_element_index = 0;
+ src_frame_index = 0;
+ dest_element_index = 1;
+ /* Number of elements per frame */
+ elem_count = vout->pix.width * vout->bpp;
+ frame_count = vout->pix.height;
+ tx = &vout->vrfb_dma_tx;
+ tx->tx_status = 0;
+ omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
+ tx->dev_id, 0x0);
+ /* src_port required only for OMAP1 */
+ omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+ dmabuf, src_element_index, src_frame_index);
+ /*set dma source burst mode for VRFB */
+ omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+ rotation = calc_rotation(vout);
+
+ /* dest_port required only for OMAP1 */
+ omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
+ vout->vrfb_context[vb->i].paddr[0], dest_element_index,
+ dest_frame_index);
+ /*set dma dest burst mode for VRFB */
+ omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+ omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
+
+ omap_start_dma(tx->dma_ch);
+ interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
+
+ if (tx->tx_status == 0) {
+ omap_stop_dma(tx->dma_ch);
+ return -EINVAL;
+ }
+ /* Store buffers physical address into an array. Addresses
+ * from this array will be used to configure DSS */
+ vout->queued_buf_addr[vb->i] = (u8 *)
+ vout->vrfb_context[vb->i].paddr[rotation];
+ return 0;
+}
+
+/*
+ * Calculate the buffer offsets from which the streaming should
+ * start. This offset calculation is mainly required because of
+ * the VRFB 32 pixels alignment with rotation.
+ */
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout)
+{
+ enum dss_rotation rotation;
+ bool mirroring = vout->mirror;
+ struct v4l2_rect *crop = &vout->crop;
+ struct v4l2_pix_format *pix = &vout->pix;
+ int *cropped_offset = &vout->cropped_offset;
+ int vr_ps = 1, ps = 2, temp_ps = 2;
+ int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+
+ rotation = calc_rotation(vout);
+
+ if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+ V4L2_PIX_FMT_UYVY == pix->pixelformat) {
+ if (rotation_enabled(vout)) {
+ /*
+ * ps - Actual pixel size for YUYV/UYVY for
+ * VRFB/Mirroring is 4 bytes
+ * vr_ps - Virtually pixel size for YUYV/UYVY is
+ * 2 bytes
+ */
+ ps = 4;
+ vr_ps = 2;
+ } else {
+ ps = 2; /* otherwise the pixel size is 2 byte */
+ }
+ } else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
+ ps = 4;
+ } else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
+ ps = 3;
+ }
+ vout->ps = ps;
+ vout->vr_ps = vr_ps;
+
+ if (rotation_enabled(vout)) {
+ line_length = MAX_PIXELS_PER_LINE;
+ ctop = (pix->height - crop->height) - crop->top;
+ cleft = (pix->width - crop->width) - crop->left;
+ } else {
+ line_length = pix->width;
+ }
+ vout->line_length = line_length;
+ switch (rotation) {
+ case dss_rotation_90_degree:
+ offset = vout->vrfb_context[0].yoffset *
+ vout->vrfb_context[0].bytespp;
+ temp_ps = ps / vr_ps;
+ if (mirroring == 0) {
+ *cropped_offset = offset + line_length *
+ temp_ps * cleft + crop->top * temp_ps;
+ } else {
+ *cropped_offset = offset + line_length * temp_ps *
+ cleft + crop->top * temp_ps + (line_length *
+ ((crop->width / (vr_ps)) - 1) * ps);
+ }
+ break;
+ case dss_rotation_180_degree:
+ offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
+ vout->vrfb_context[0].bytespp) +
+ (vout->vrfb_context[0].xoffset *
+ vout->vrfb_context[0].bytespp));
+ if (mirroring == 0) {
+ *cropped_offset = offset + (line_length * ps * ctop) +
+ (cleft / vr_ps) * ps;
+
+ } else {
+ *cropped_offset = offset + (line_length * ps * ctop) +
+ (cleft / vr_ps) * ps + (line_length *
+ (crop->height - 1) * ps);
+ }
+ break;
+ case dss_rotation_270_degree:
+ offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
+ vout->vrfb_context[0].bytespp;
+ temp_ps = ps / vr_ps;
+ if (mirroring == 0) {
+ *cropped_offset = offset + line_length *
+ temp_ps * crop->left + ctop * ps;
+ } else {
+ *cropped_offset = offset + line_length *
+ temp_ps * crop->left + ctop * ps +
+ (line_length * ((crop->width / vr_ps) - 1) *
+ ps);
+ }
+ break;
+ case dss_rotation_0_degree:
+ if (mirroring == 0) {
+ *cropped_offset = (line_length * ps) *
+ crop->top + (crop->left / vr_ps) * ps;
+ } else {
+ *cropped_offset = (line_length * ps) *
+ crop->top + (crop->left / vr_ps) * ps +
+ (line_length * (crop->height - 1) * ps);
+ }
+ break;
+ default:
+ *cropped_offset = (line_length * ps * crop->top) /
+ vr_ps + (crop->left * ps) / vr_ps +
+ ((crop->width / vr_ps) - 1) * ps;
+ break;
+ }
+}
diff --git a/drivers/media/video/omap/omap_vout_vrfb.h b/drivers/media/video/omap/omap_vout_vrfb.h
new file mode 100644
index 0000000..ffde741
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.h
@@ -0,0 +1,40 @@
+/*
+ * omap_vout_vrfb.h
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef OMAP_VOUT_VRFB_H
+#define OMAP_VOUT_VRFB_H
+
+#ifdef CONFIG_VIDEO_OMAP2_VOUT_VRFB
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout);
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+ u32 static_vrfb_allocation);
+void omap_vout_release_vrfb(struct omap_vout_device *vout);
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+ unsigned int *count, unsigned int startindex);
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+ struct videobuf_buffer *vb);
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout);
+#else
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) { }
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+ u32 static_vrfb_allocation)
+ { return 0; }
+void omap_vout_release_vrfb(struct omap_vout_device *vout) { }
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+ unsigned int *count, unsigned int startindex)
+ { return 0; }
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+ struct videobuf_buffer *vb)
+ { return 0; }
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) { }
+#endif
+
+#endif
diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h
index 31e6261..26e2b63 100644
--- a/drivers/media/video/omap/omap_voutdef.h
+++ b/drivers/media/video/omap/omap_voutdef.h
@@ -12,6 +12,7 @@
#define OMAP_VOUTDEF_H
#include <video/omapdss.h>
+#include <plat/vrfb.h>
#define YUYV_BPP 2
#define RGB565_BPP 2
@@ -62,6 +63,18 @@ enum dss_rotation {
dss_rotation_180_degree = 2,
dss_rotation_270_degree = 3,
};
+
+/* Enum for choosing rotation type for vout
+ * DSS2 doesn't understand no rotation as an
+ * option while V4L2 driver doesn't support
+ * rotation in the case where VRFB is not built in
+ * the kernel
+ */
+enum vout_rotaion_type {
+ VOUT_ROT_NONE = 0,
+ VOUT_ROT_VRFB = 1,
+};
+
/*
* This structure is used to store the DMA transfer parameters
* for VRFB hidden buffer
@@ -78,6 +91,7 @@ struct omapvideo_info {
int id;
int num_overlays;
struct omap_overlay *overlays[MAX_OVLS];
+ enum vout_rotaion_type rotation_type;
};
struct omap2video_device {
@@ -206,4 +220,6 @@ static inline int calc_rotation(const struct omap_vout_device *vout)
return dss_rotation_180_degree;
}
}
+
+void omap_vout_free_buffers(struct omap_vout_device *vout);
#endif /* ifndef OMAP_VOUTDEF_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread