From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from cmsout02.mbox.net ([165.212.64.32]:52436 "EHLO cmsout02.mbox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754362Ab1FNLQC (ORCPT ); Tue, 14 Jun 2011 07:16:02 -0400 Message-ID: <4DF742D7.5020606@usa.net> Date: Tue, 14 Jun 2011 13:15:35 +0200 From: Issa Gorissen MIME-Version: 1.0 To: Bart Coninckx CC: linux-media@vger.kernel.org Subject: Re: "dvb_ca adaptor 0: PC card did not respond :(" with Technotrend S2-3200 References: <4DF53E1F.7010903@telenet.be> <4DF73B45.7000900@usa.net> <4DF73C94.7010003@telenet.be> In-Reply-To: <4DF73C94.7010003@telenet.be> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit List-ID: Sender: On 14/06/2011 12:48, Bart Coninckx wrote: > > I will try your suggestion though. Off topic, but would you advice > 11.4 in favor of 11.3? As a secondary route, I was thinking about > using sasc-ng (softcamming, legal in this case) and the code seems not > to want to compile on 11.4. Also 11.4 broke after updating the kernel. Except from the different kernel version, you can go for 11.3, as far as you're concerned only by TV related stuff. You might want to recompile the kernel with a newer version to get all the patches related to the S2 3200. Also, do not hesitate to try out different versions of the kernel if you stumble upon problem with the S2 3200; I had some trouble with it and some recent patches do not suit my setup (dish, cable length, diseqc switch, etc ...) For the sasc-ng matter, I did play with it last year but figured it is a time black hole when it does not work. I guess you have a legal subscription card. Then unless you like to play around, just drop softcams. And CAMs are not that expensive. -- Issa