public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Antti Palosaari <crope@iki.fi>
To: linux-media@vger.kernel.org
Subject: [PATCH 2/3] dvb-usb: multi-frontend support (MFE)
Date: Tue, 26 Jul 2011 03:17:12 +0300	[thread overview]
Message-ID: <4E2E0788.3010507@iki.fi> (raw)

Signed-off-by: Antti Palosaari <crope@iki.fi>
---
  drivers/media/dvb/dvb-usb/dvb-usb-dvb.c  |   85 
+++++++++++++++++++++++-------
  drivers/media/dvb/dvb-usb/dvb-usb-init.c |    4 ++
  drivers/media/dvb/dvb-usb/dvb-usb.h      |   11 +++-
  3 files changed, 78 insertions(+), 22 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c 
b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
index d8c0bd9..5e34df7 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
@@ -162,8 +162,11 @@ static int dvb_usb_fe_wakeup(struct dvb_frontend *fe)

  	dvb_usb_device_power_ctrl(adap->dev, 1);

-	if (adap->fe_init)
-		adap->fe_init(fe);
+	if (adap->props.frontend_ctrl)
+		adap->props.frontend_ctrl(fe, 1);
+
+	if (adap->fe_init[fe->id])
+		adap->fe_init[fe->id](fe);

  	return 0;
  }
@@ -172,45 +175,89 @@ static int dvb_usb_fe_sleep(struct dvb_frontend *fe)
  {
  	struct dvb_usb_adapter *adap = fe->dvb->priv;

-	if (adap->fe_sleep)
-		adap->fe_sleep(fe);
+	if (adap->fe_sleep[fe->id])
+		adap->fe_sleep[fe->id](fe);
+
+	if (adap->props.frontend_ctrl)
+		adap->props.frontend_ctrl(fe, 0);

  	return dvb_usb_device_power_ctrl(adap->dev, 0);
  }

  int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap)
  {
+	int ret, i, x;
+
+	memset(adap->fe, 0, sizeof(adap->fe));
+
  	if (adap->props.frontend_attach == NULL) {
-		err("strange: '%s' #%d doesn't want to attach a 
frontend.",adap->dev->desc->name, adap->id);
+		err("strange: '%s' #%d doesn't want to attach a frontend.",
+			adap->dev->desc->name, adap->id);
+
  		return 0;
  	}

-	/* re-assign sleep and wakeup functions */
-	if (adap->props.frontend_attach(adap) == 0 && adap->fe[0] != NULL) {
-		adap->fe_init  = adap->fe[0]->ops.init;  adap->fe[0]->ops.init  = 
dvb_usb_fe_wakeup;
-		adap->fe_sleep = adap->fe[0]->ops.sleep; adap->fe[0]->ops.sleep = 
dvb_usb_fe_sleep;
+	/* register all given adapter frontends */
+	if (adap->props.num_frontends)
+		x = adap->props.num_frontends - 1;
+	else
+		x = 0;
+
+	for (i = 0; i <= x; i++) {
+		ret = adap->props.frontend_attach(adap);
+		if (ret || adap->fe[i] == NULL) {
+			/* only print error when there is no FE at all */
+			if (i == 0)
+				err("no frontend was attached by '%s'",
+					adap->dev->desc->name);
+
+			return 0;
+		}

-		if (dvb_register_frontend(&adap->dvb_adap, adap->fe[0])) {
-			err("Frontend registration failed.");
-			dvb_frontend_detach(adap->fe[0]);
-			adap->fe[0] = NULL;
-			return -ENODEV;
+		adap->fe[i]->id = i;
+
+		/* re-assign sleep and wakeup functions */
+		adap->fe_init[i] = adap->fe[i]->ops.init;
+		adap->fe[i]->ops.init  = dvb_usb_fe_wakeup;
+		adap->fe_sleep[i] = adap->fe[i]->ops.sleep;
+		adap->fe[i]->ops.sleep = dvb_usb_fe_sleep;
+
+		if (dvb_register_frontend(&adap->dvb_adap, adap->fe[i])) {
+			err("Frontend %d registration failed.", i);
+			dvb_frontend_detach(adap->fe[i]);
+			adap->fe[i] = NULL;
+			/* In error case, do not try register more FEs,
+			 * still leaving already registered FEs alive. */
+			if (i == 0)
+				return -ENODEV;
+			else
+				return 0;
  		}

  		/* only attach the tuner if the demod is there */
  		if (adap->props.tuner_attach != NULL)
  			adap->props.tuner_attach(adap);
-	} else
-		err("no frontend was attached by '%s'",adap->dev->desc->name);
+	}

  	return 0;
  }

  int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap)
  {
-	if (adap->fe[0] != NULL) {
-		dvb_unregister_frontend(adap->fe[0]);
-		dvb_frontend_detach(adap->fe[0]);
+	int i;
+
+	/* unregister all given adapter frontends */
+	if (adap->props.num_frontends)
+		i = adap->props.num_frontends - 1;
+	else
+		i = 0;
+
+	for (; i >= 0; i--) {
+		if (adap->fe[i] != NULL) {
+			dvb_unregister_frontend(adap->fe[i]);
+			dvb_frontend_detach(adap->fe[i]);
+		}
  	}
+
  	return 0;
  }
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c 
b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index 2e3ea0f..f9af348 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -77,6 +77,10 @@ static int dvb_usb_adapter_init(struct dvb_usb_device 
*d, short *adapter_nrs)
  			return ret;
  		}

+		/* use exclusive FE lock if there is multiple shared FEs */
+		if (adap->fe[1])
+			adap->dvb_adap.mfe_shared = 1;
+
  		d->num_adapters_initialized++;
  		d->state |= DVB_USB_STATE_DVB;
  	}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h 
b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 2e57bff..a3e77b2 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -124,6 +124,8 @@ struct usb_data_stream_properties {
   * @caps: capabilities of the DVB USB device.
   * @pid_filter_count: number of PID filter position in the optional 
hardware
   *  PID-filter.
+ * @num_frontends: number of frontends of the DVB USB adapter.
+ * @frontend_ctrl: called to power on/off active frontend.
   * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
   *  device (not URB submitting/killing).
   * @pid_filter_ctrl: called to en/disable the PID filter, if any.
@@ -141,7 +143,9 @@ struct dvb_usb_adapter_properties {
  #define DVB_USB_ADAP_RECEIVES_204_BYTE_TS         0x08
  	int caps;
  	int pid_filter_count;
+	int num_frontends;

+	int (*frontend_ctrl)   (struct dvb_frontend *, int);
  	int (*streaming_ctrl)  (struct dvb_usb_adapter *, int);
  	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
  	int (*pid_filter)      (struct dvb_usb_adapter *, int, u16, int);
@@ -345,6 +349,7 @@ struct usb_data_stream {
   *
   * @stream: the usb data stream.
   */
+#define MAX_NO_OF_FE_PER_ADAP 2
  struct dvb_usb_adapter {
  	struct dvb_usb_device *dev;
  	struct dvb_usb_adapter_properties props;
@@ -363,11 +368,11 @@ struct dvb_usb_adapter {
  	struct dmxdev        dmxdev;
  	struct dvb_demux     demux;
  	struct dvb_net       dvb_net;
-	struct dvb_frontend *fe[1];
+	struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP];
  	int                  max_feed_count;

-	int (*fe_init)  (struct dvb_frontend *);
-	int (*fe_sleep) (struct dvb_frontend *);
+	int (*fe_init[MAX_NO_OF_FE_PER_ADAP])  (struct dvb_frontend *);
+	int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);

  	struct usb_data_stream stream;

-- 
1.7.6

-- 
http://palosaari.fi/

             reply	other threads:[~2011-07-26  0:17 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-26  0:17 Antti Palosaari [this message]
2011-07-27 19:06 ` [PATCH 2/3] dvb-usb: multi-frontend support (MFE) Mauro Carvalho Chehab
2011-07-27 19:49   ` Antti Palosaari
2011-07-27 20:06     ` Mauro Carvalho Chehab
2011-07-27 20:19       ` Antti Palosaari
2011-08-01  0:46     ` Mauro Carvalho Chehab
2011-08-01  1:22       ` Antti Palosaari
2011-08-01  2:24         ` Mauro Carvalho Chehab
2011-09-07 16:51           ` Antti Palosaari
2011-09-07 17:41             ` Michael Krufky
2011-09-07 17:45               ` Michael Krufky
2011-09-07 18:04                 ` Michael Krufky
2011-09-07 18:20                 ` Antti Palosaari
2011-09-07 18:36                   ` Michael Krufky
2011-09-07 21:10                     ` Antti Palosaari
2011-09-07 21:32                       ` Michael Krufky
2011-07-27 22:07   ` Malcolm Priestley
2011-07-27 22:23     ` Antti Palosaari
2011-07-31 18:28       ` Patrick Boettcher
2011-08-01  1:28         ` Antti Palosaari
  -- strict thread matches above, loose matches on Subject: below --
2011-07-28 21:35 Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E2E0788.3010507@iki.fi \
    --to=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox