From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from casper.infradead.org ([85.118.1.10]:60119 "EHLO casper.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754473Ab1HaNuk (ORCPT ); Wed, 31 Aug 2011 09:50:40 -0400 Message-ID: <4E5E3C2B.6020703@infradead.org> Date: Wed, 31 Aug 2011 10:50:35 -0300 From: Mauro Carvalho Chehab MIME-Version: 1.0 To: Hans Verkuil CC: linux-media@vger.kernel.org, Guennadi Liakhovetski , Hans Verkuil Subject: Re: [RFC PATCH 5/6] V4L menu: move all platform drivers to the bottom of the menu. References: <1314797925-8113-1-git-send-email-hverkuil@xs4all.nl> <99c353d49539e4a2a8f165db612ed6a7e82a57b9.1314797675.git.hans.verkuil@cisco.com> In-Reply-To: <99c353d49539e4a2a8f165db612ed6a7e82a57b9.1314797675.git.hans.verkuil@cisco.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Em 31-08-2011 10:38, Hans Verkuil escreveu: > From: Hans Verkuil IMO, a submenu for those drivers makes sense. > > Signed-off-by: Hans Verkuil > --- > drivers/media/video/Kconfig | 106 ++++++++++++++++++++++--------------------- > 1 files changed, 55 insertions(+), 51 deletions(-) > > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig > index 5beff36..d14da37 100644 > --- a/drivers/media/video/Kconfig > +++ b/drivers/media/video/Kconfig > @@ -630,25 +630,6 @@ config USB_S2255 > > endif # V4L_USB_DRIVERS > > -config VIDEO_SH_VOU > - tristate "SuperH VOU video output driver" > - depends on VIDEO_DEV && ARCH_SHMOBILE > - select VIDEOBUF_DMA_CONTIG > - help > - Support for the Video Output Unit (VOU) on SuperH SoCs. > - > -config VIDEO_VIU > - tristate "Freescale VIU Video Driver" > - depends on VIDEO_V4L2 && PPC_MPC512x > - select VIDEOBUF_DMA_CONTIG > - default y > - ---help--- > - Support for Freescale VIU video driver. This device captures > - video data, or overlays video on DIU frame buffer. > - > - Say Y here if you want to enable VIU device on MPC5121e Rev2+. > - In doubt, say N. > - > config VIDEO_VIVI > tristate "Virtual Video Driver" > depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 > @@ -663,20 +644,8 @@ config VIDEO_VIVI > Say Y here if you want to test video apps or debug V4L devices. > In doubt, say N. > > -source "drivers/media/video/davinci/Kconfig" > - > -source "drivers/media/video/omap/Kconfig" > - > source "drivers/media/video/bt8xx/Kconfig" > > -config VIDEO_VINO > - tristate "SGI Vino Video For Linux" > - depends on I2C && SGI_IP22 && VIDEO_V4L2 > - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO > - help > - Say Y here to build in support for the Vino video input system found > - on SGI Indy machines. > - > source "drivers/media/video/zoran/Kconfig" > > config VIDEO_MEYE > @@ -695,16 +664,6 @@ config VIDEO_MEYE > > source "drivers/media/video/saa7134/Kconfig" > > -config VIDEO_TIMBERDALE > - tristate "Support for timberdale Video In/LogiWIN" > - depends on VIDEO_V4L2 && I2C && DMADEVICES > - select DMA_ENGINE > - select TIMB_DMA > - select VIDEO_ADV7180 > - select VIDEOBUF_DMA_CONTIG > - ---help--- > - Add support for the Video In peripherial of the timberdale FPGA. > - > source "drivers/media/video/cx88/Kconfig" > > source "drivers/media/video/cx23885/Kconfig" > @@ -719,6 +678,61 @@ source "drivers/media/video/saa7164/Kconfig" > > source "drivers/media/video/marvell-ccic/Kconfig" > > +config VIDEO_VIA_CAMERA > + tristate "VIAFB camera controller support" > + depends on FB_VIA > + select VIDEOBUF_DMA_SG > + select VIDEO_OV7670 > + help > + Driver support for the integrated camera controller in VIA > + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems > + with ov7670 sensors. > + > +# > +# Platform multimedia device configuration > +# > + > +source "drivers/media/video/davinci/Kconfig" > + > +source "drivers/media/video/omap/Kconfig" > + > +config VIDEO_SH_VOU > + tristate "SuperH VOU video output driver" > + depends on VIDEO_DEV && ARCH_SHMOBILE > + select VIDEOBUF_DMA_CONTIG > + help > + Support for the Video Output Unit (VOU) on SuperH SoCs. > + > +config VIDEO_VIU > + tristate "Freescale VIU Video Driver" > + depends on VIDEO_V4L2 && PPC_MPC512x > + select VIDEOBUF_DMA_CONTIG > + default y > + ---help--- > + Support for Freescale VIU video driver. This device captures > + video data, or overlays video on DIU frame buffer. > + > + Say Y here if you want to enable VIU device on MPC5121e Rev2+. > + In doubt, say N. > + > +config VIDEO_TIMBERDALE > + tristate "Support for timberdale Video In/LogiWIN" > + depends on VIDEO_V4L2 && I2C && DMADEVICES > + select DMA_ENGINE > + select TIMB_DMA > + select VIDEO_ADV7180 > + select VIDEOBUF_DMA_CONTIG > + ---help--- > + Add support for the Video In peripherial of the timberdale FPGA. > + > +config VIDEO_VINO > + tristate "SGI Vino Video For Linux" > + depends on I2C && SGI_IP22 && VIDEO_V4L2 > + select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO > + help > + Say Y here to build in support for the Vino video input system found > + on SGI Indy machines. > + > config VIDEO_M32R_AR > tristate "AR devices" > depends on M32R && VIDEO_V4L2 > @@ -738,16 +752,6 @@ config VIDEO_M32R_AR_M64278 > To compile this driver as a module, choose M here: the > module will be called arv. > > -config VIDEO_VIA_CAMERA > - tristate "VIAFB camera controller support" > - depends on FB_VIA > - select VIDEOBUF_DMA_SG > - select VIDEO_OV7670 > - help > - Driver support for the integrated camera controller in VIA > - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems > - with ov7670 sensors. > - > config VIDEO_OMAP3 > tristate "OMAP 3 Camera support (EXPERIMENTAL)" > select OMAP_IOMMU