From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mailout-eu.gmx.com ([213.165.64.43]:54569 "HELO mailout-eu.gmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753351Ab1ITLtZ (ORCPT ); Tue, 20 Sep 2011 07:49:25 -0400 Message-ID: <4E787C1B.8050304@gmx.com> Date: Tue, 20 Sep 2011 21:42:19 +1000 From: David Shepherd MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Leadtek DTV 2000DS Not Working in Mythbuntu 11.04 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: I'm running Mythbuntu 11.04 (2.6.38-11 kernel) and recently bought a Leadtek Winfast DTV2000DS PCI dual tuner card. It's supposed to work out-of-the-box but mine just doesn't... I've tried the card in a Windows 7 Media PC and it worked sweet as, so I know there's nothing wrong with the hardware... So the relevant section from lsusb is $lsusb / Bus 006 Device 002: ID 0413:6a04 Leadtek Research, Inc./ and with more detail $sudo lsusb -v -s 006:002 /Bus 006 Device 002: ID 0413:6a04 Leadtek Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0413 Leadtek Research, Inc. idProduct 0x6a04 bcdDevice 2.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) / The relevant section from dmesg is $dmesg /[ 84.230061] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 99.085019] IR NEC protocol handler initialized [ 99.100323] IR RC5(x) protocol handler initialized [ 99.104296] IR RC6 protocol handler initialized [ 99.107529] IR JVC protocol handler initialized [ 99.110847] IR Sony protocol handler initialized [ 99.119084] lirc_dev: IR Remote Control driver registered, major 250 [ 99.133810] IR LIRC bridge handler initialized [ 104.704513] af9015: bulk message failed:-110 (8/0) [ 104.704524] af9015: eeprom read failed:-110 [ 104.704547] dvb_usb_af9015: probe of 6-1:1.0 failed with error -110 [ 104.706480] usbcore: registered new interface driver dvb_usb_af9015 / if i try and manually load the driver i get $sudo modprobe dvb-usb-af9015 $ dmesg /[ 6163.061092] usb 6-1: usbfs: USBDEVFS_CONTROL failed cmd lsusb rqt 128 rq 6 len 255 ret -110/ I've messed around a lot, different versions of the firmware etc, i chucked in an empty HDD and tried a clean install of 11.04, and tried to install 11.10 Beta 1 (that doesn't work - it freezes after the Remote Control Setup page as someone reported here https://bugs.launchpad.net/bugs/854426), and nothing has worked besides using it in a Windows machine. Any ideas? cheers Shep