From: LD <loycfd@tin.it>
To: linux-media@vger.kernel.org
Subject: RE.request information
Date: Wed, 05 Oct 2011 12:27:21 +0200 [thread overview]
Message-ID: <4E8C3109.7020709@tin.it> (raw)
Thanks for the reply.
As suggested in the possible numbers of cards, I found the number (card
= 174) which allows the card to scan for TV frequencies.
Unfortunately the scan does not finish successfully, because it also
needs the identification of the tuner. Have suggestions for the number
of tuners.
Waiting for your suggestion for the number of tuners to try, I would
like to write for confirmation of ASUSTeK (Device [1043:8188]) have an
address where I can write.
Thank you for the answer
LD
Il 03/10/2011 20:50, Charlie X. Liu ha scritto:
> Checking in the CARDLIST.saa7134 (
> http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134
> ),
> sounds, it (Device [1043:8188]) is not in the CARDLIST yet. Then, you may
> check with ASUSTeK and see which one in the CARDLIST is closer to it.
> Like:
>
> 78 -> ASUSTeK P7131 Dual [1043:4862]
> 112 -> ASUSTeK P7131 Hybrid [1043:4876]
> 146 -> ASUSTeK P7131 Analog
> ..
> ..
> 174 -> Asus Europa Hybrid OEM [1043:4847]
>
>
> -----Original Message-----
> From: linux-media-owner@vger.kernel.org
> [mailto:linux-media-owner@vger.kernel.org] On Behalf Of LD
> Sent: Sunday, October 02, 2011 7:47 AM
> To: linux-media@vger.kernel.org
> Subject: request information
>
> I would like to know which firmware and drivers are helpful to install
> and set this type of card:
>
> Multimedia controller [0480]: Philips Semiconductors
> SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d0)
> Subsystem: ASUSTeK Computer Inc. Device [1043:8188]
> Control: I/O- Mem + BusMaster +
> SpecCycle-MemWINV-VGASnoop-ParErr-Stepping-SERR-FastB2B-DisINTx-
> Status: Cap + 66MHz-UDF-FastB2B + ParErr-DEVSEL = medium>
> TAbort-<TAbort-<MAbort-> SERR-<PERR-intX-
> Latency: 64 (21000ns min, 8000ns max)
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at dbedb800 (32-bit, non-prefetchable) [size = 2K]
> Capabilities:<access denied>
> Kernel driver in use: saa7134
> Kernel modules: saa7134
>
> Thank you for the answer
>
> LD
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next reply other threads:[~2011-10-05 10:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 10:27 LD [this message]
2011-10-05 18:51 ` request information Charlie X. Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8C3109.7020709@tin.it \
--to=loycfd@tin.it \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox