From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:38632 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754613Ab1JFNKj (ORCPT ); Thu, 6 Oct 2011 09:10:39 -0400 Message-ID: <4E8DA8CC.5080903@iki.fi> Date: Thu, 06 Oct 2011 16:10:36 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Johannes Stezenbach CC: linux-media@vger.kernel.org Subject: Re: Cypress EZ-USB FX2 firmware development References: <4E8B61FF.8000505@iki.fi> <20111004212901.GA20648@linuxtv.org> <20111006124717.GA9110@linuxtv.org> In-Reply-To: <20111006124717.GA9110@linuxtv.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 10/06/2011 03:47 PM, Johannes Stezenbach wrote: > On Tue, Oct 04, 2011 at 11:29:01PM +0200, Johannes Stezenbach wrote: >> On Tue, Oct 04, 2011 at 10:43:59PM +0300, Antti Palosaari wrote: >>> I would like to made own firmware for Cypress FX2 based DVB device. >>> Is there any sample to look example? >> >> http://linuxtv.org/cgi-bin/viewvc.cgi/dvb-hw/dvbusb-fx2/termini/ > > PS: If you haven't found it already, there is also fx2lib: > https://github.com/mulicheng/fx2lib > http://sourceforge.net/projects/fx2lib/ > > Johannes Thank you! I already looked those termini project files and it was kinda jackpot. Much more than I ever imagined. I will try to compile it next weekend and upload to my FX2 device to see if I can get at least control for I2C-bus. regards Antti -- http://palosaari.fi/