From: James <bjlockie@lockie.ca>
To: linux-media Mailing List <linux-media@vger.kernel.org>
Subject: Re: recent cx23385?
Date: Thu, 13 Oct 2011 14:01:48 -0400 [thread overview]
Message-ID: <4E97278C.109@lockie.ca> (raw)
In-Reply-To: <4E9713F5.1060308@lockie.ca>
On 10/13/11 12:38, James wrote:
> On 10/13/11 12:31, James wrote:
>> On 10/13/11 08:48, Devin Heitmueller wrote:
>>> On Thu, Oct 13, 2011 at 1:59 AM, James<bjlockie@lockie.ca> wrote:
>>>> Is there a newer cx23385 driver than the one in kernel-3.0.4?
>>>> I bought
>>>> ahttp://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1250 and it
>>>> shows video for about 5 seconds and then locks up the system.
>>> You cannot install individual drivers (Linux doesn't work like Windows
>>> in this regards). You have to either install the latest kernel or you
>>> can swap out the whole media subsystem with a later version.
>>>
>>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
>>>
>>>
>>> Devin
>> Where do I see the date/version of the media subsystem?
>>
>> It is not video related, w_scan works sometimes but freezes the
>> kernel sometimes.
>> This is booting right to a console.
>> Is there a program to do a stress test on the hardware and print lots
>> of messages as it's working?
>>
>>
>> $ modinfo cx23885
>> filename:
>> /lib/modules/3.0.4/kernel/drivers/media/video/cx23885/cx23885.ko
>> license: GPL
>> author: Steven Toth <stoth@linuxtv.org>
>> description: v4l2 driver module for cx23885 based TV cards
>> license: GPL
>> author: Steven Toth <stoth@linuxtv.org>
>> description: Driver for cx23885 based TV cards
>> alias: pci:v000014F1d00008880sv*sd*bc*sc*i*
>> alias: pci:v000014F1d00008852sv*sd*bc*sc*i*
>> depends:
>> videobuf-core,videobuf-dma-sg,stv0367,lnbp21,cx2341x,tveeprom,lgdt330x,videobuf-dvb,stv0900,zl10353,mt2131,ds3000,dib7000p,btcx-risc,tda10048,cx24116,s5h1411,s5h1409,stv6110
>> vermagic: 3.0.4 SMP mod_unload
>> parm: ci_dbg:Enable CI debugging (int)
>> parm: ci_irq_enable:Enable IRQ from CAM (int)
>> parm: ir_888_debug:enable debug messages [CX23888 IR
>> controller] (int)
>> parm: mpegbufs:number of mpeg buffers, range 2-32 (int)
>> parm: mpeglines:number of lines in an MPEG buffer, range
>> 2-32 (int)
>> parm: mpeglinesize:number of bytes in each line of an MPEG
>> buffer, range 512-1024 (int)
>> parm: v4l_debug:enable V4L debug messages (int)
>> parm: alt_tuner:Enable alternate tuner configuration (int)
>> parm: adapter_nr:DVB adapter numbers (array of short)
>> parm: i2c_debug:enable debug messages [i2c] (int)
>> parm: i2c_scan:scan i2c bus at insmod time (int)
>> parm: debug:enable debug messages (int)
>> parm: card:card type (array of int)
>> parm: vbibufs:number of vbi buffers, range 2-32 (int)
>> parm: vbi_debug:enable debug messages [vbi] (int)
>> parm: video_nr:video device numbers (array of int)
>> parm: vbi_nr:vbi device numbers (array of int)
>> parm: radio_nr:radio device numbers (array of int)
>> parm: video_debug:enable debug messages [video] (int)
>> parm: irq_debug:enable debug messages [IRQ handler] (int)
>> parm: vid_limit:capture memory limit in megabytes (int)
>> parm: enable_885_ir:Enable integrated IR controller for
>> supported
>> CX2388[57] boards that are wired for it:
>> HVR-1250 (reported safe)
>> TeVii S470 (reported unsafe)
>> This can cause an interrupt storm with some cards.
>> Default: 0 [Disabled] (int)
>>
>> I did:
>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
>>
>> /bin/sh: /sbin/lsmod: No such file or directory
>> Lot's of pr_fmt redefined errors.
>>
>> I put the build log at: lockie.ca/test/v4l_build.txt.bz2
>>
>> Something is not right though. :-(
>> $ modprobe cx23885
>> WARNING: Deprecated config file /etc/modprobe.conf, all config files
>> belong into /etc/modprobe.d/.
>> WARNING: Error inserting altera_ci
>> (/lib/modules/3.0.4/kernel/drivers/media/video/cx23885/altera-ci.ko):
>> Invalid module format
>> WARNING: Error inserting media
>> (/lib/modules/3.0.4/kernel/drivers/media/media.ko): Invalid module
>> format
>> WARNING: Error inserting videodev
>> (/lib/modules/3.0.4/kernel/drivers/media/video/videodev.ko): Invalid
>> module format
>> WARNING: Error inserting v4l2_common
>> (/lib/modules/3.0.4/kernel/drivers/media/video/v4l2-common.ko):
>> Invalid module format
>> WARNING: Error inserting videobuf_core
>> (/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-core.ko):
>> Invalid module format
>> WARNING: Error inserting videobuf_dvb
>> (/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-dvb.ko):
>> Invalid module format
>> WARNING: Error inserting videobuf_dma_sg
>> (/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-dma-sg.ko):
>> Invalid module format
>> WARNING: Error inserting cx2341x
>> (/lib/modules/3.0.4/kernel/drivers/media/video/cx2341x.ko): Invalid
>> module format
>> WARNING: Error inserting altera_stapl
>> (/lib/modules/3.0.4/kernel/drivers/linux/drivers/misc/altera-stapl/altera-stapl.ko):
>> Invalid module format
>> WARNING: Error inserting rc_core
>> (/lib/modules/3.0.4/kernel/drivers/media/rc/rc-core.ko): Invalid
>> module format
>> FATAL: Error inserting cx23885
>> (/lib/modules/3.0.4/kernel/drivers/media/video/cx23885/cx23885.ko):
>> Invalid module format
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> dmesg:
> dvb_core: exports duplicate symbol dvb_ca_en50221_camchange_irq (owned
> by kernel)
Compiled, I unchecked Multimedia and recompiled the kernel.
It still crashes though. :-(
next prev parent reply other threads:[~2011-10-13 18:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 5:59 recent cx23385? James
2011-10-13 12:48 ` Devin Heitmueller
2011-10-13 16:31 ` James
2011-10-13 16:38 ` James
2011-10-13 18:01 ` James [this message]
2011-10-13 17:52 ` Devin Heitmueller
2011-10-13 18:05 ` /bin/lsmod James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E97278C.109@lockie.ca \
--to=bjlockie@lockie.ca \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox