* PVR-2200 error with what I think is tuning
@ 2011-10-18 22:00 Greg Bowyer
2011-10-18 22:03 ` Devin Heitmueller
0 siblings, 1 reply; 3+ messages in thread
From: Greg Bowyer @ 2011-10-18 22:00 UTC (permalink / raw)
To: linux-media
Hi there
You probably get this a lot, with the latest and greatest drivers from
your git repository at Steve Tosh's website I get the following after a
few days
[198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len =
1, i2c_transfer returned: -5
[198934.085310] tda18271_init: [4-0060|S] error -5 on line 831
[198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909
[198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994
[198934.085331] saa7164_cmd_send() No free sequences
[198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc
[198934.085341] tda10048_readreg: readreg error (ret == -5)
[198934.087195] tda10048_readreg: readreg error (ret == -5)
[198934.087209] saa7164_cmd_send() No free sequences
[198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc
[198934.087220] tda10048_readreg: readreg error (ret == -5)
My tuning software is tvheadend (which I would prefer to keep)
I started to look at the sourcecode, but I know too little about I2C to
make any sense of what might be bugging out
Is there anything I can do to avoid this ?
-- Greg
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PVR-2200 error with what I think is tuning
2011-10-18 22:00 PVR-2200 error with what I think is tuning Greg Bowyer
@ 2011-10-18 22:03 ` Devin Heitmueller
2011-10-18 22:05 ` Greg Bowyer
0 siblings, 1 reply; 3+ messages in thread
From: Devin Heitmueller @ 2011-10-18 22:03 UTC (permalink / raw)
To: Greg Bowyer; +Cc: linux-media
On Tue, Oct 18, 2011 at 6:00 PM, Greg Bowyer <gbowyer@fastmail.co.uk> wrote:
> Hi there
>
> You probably get this a lot, with the latest and greatest drivers from your
> git repository at Steve Tosh's website I get the following after a few days
>
> [198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len = 1,
> i2c_transfer returned: -5
> [198934.085310] tda18271_init: [4-0060|S] error -5 on line 831
> [198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909
> [198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994
> [198934.085331] saa7164_cmd_send() No free sequences
> [198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc
> [198934.085341] tda10048_readreg: readreg error (ret == -5)
>
>
> [198934.087195] tda10048_readreg: readreg error (ret == -5)
> [198934.087209] saa7164_cmd_send() No free sequences
> [198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc
> [198934.087220] tda10048_readreg: readreg error (ret == -5)
>
> My tuning software is tvheadend (which I would prefer to keep)
>
> I started to look at the sourcecode, but I know too little about I2C to make
> any sense of what might be bugging out
>
> Is there anything I can do to avoid this ?
Just an FYI: that doesn't actually look like an i2c problem or some
other problem with the tuner or demodulator. It looks like the
saa7164 itself is wedged.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PVR-2200 error with what I think is tuning
2011-10-18 22:03 ` Devin Heitmueller
@ 2011-10-18 22:05 ` Greg Bowyer
0 siblings, 0 replies; 3+ messages in thread
From: Greg Bowyer @ 2011-10-18 22:05 UTC (permalink / raw)
To: Devin Heitmueller; +Cc: linux-media
On 18/10/11 15:03, Devin Heitmueller wrote:
> On Tue, Oct 18, 2011 at 6:00 PM, Greg Bowyer<gbowyer@fastmail.co.uk> wrote:
>> Hi there
>>
>> You probably get this a lot, with the latest and greatest drivers from your
>> git repository at Steve Tosh's website I get the following after a few days
>>
>> [198934.085303] tda18271_write_regs: [4-0060|S] ERROR: idx = 0x5, len = 1,
>> i2c_transfer returned: -5
>> [198934.085310] tda18271_init: [4-0060|S] error -5 on line 831
>> [198934.085317] tda18271_tune: [4-0060|S] error -5 on line 909
>> [198934.085324] tda18271_set_params: [4-0060|S] error -5 on line 994
>> [198934.085331] saa7164_cmd_send() No free sequences
>> [198934.085336] saa7164_api_i2c_read() error, ret(1) = 0xc
>> [198934.085341] tda10048_readreg: readreg error (ret == -5)
>>
>>
>> [198934.087195] tda10048_readreg: readreg error (ret == -5)
>> [198934.087209] saa7164_cmd_send() No free sequences
>> [198934.087214] saa7164_api_i2c_read() error, ret(1) = 0xc
>> [198934.087220] tda10048_readreg: readreg error (ret == -5)
>>
>> My tuning software is tvheadend (which I would prefer to keep)
>>
>> I started to look at the sourcecode, but I know too little about I2C to make
>> any sense of what might be bugging out
>>
>> Is there anything I can do to avoid this ?
> Just an FYI: that doesn't actually look like an i2c problem or some
> other problem with the tuner or demodulator. It looks like the
> saa7164 itself is wedged.
... The driver or the chip itself ?, would it help if I posted the lspci
-vv for the card ?
> Devin
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-10-18 22:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-18 22:00 PVR-2200 error with what I think is tuning Greg Bowyer
2011-10-18 22:03 ` Devin Heitmueller
2011-10-18 22:05 ` Greg Bowyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).