From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Antti Palosaari <crope@iki.fi>
Cc: linux-media@vger.kernel.org, Michael Krufky <mkrufky@kernellabs.com>
Subject: Re: [GIT PULL FOR 3.2] misc small changes, mostly get/set IF related
Date: Thu, 24 Nov 2011 17:58:33 -0200 [thread overview]
Message-ID: <4ECEA1E9.2000107@redhat.com> (raw)
In-Reply-To: <4EC01892.3090307@iki.fi>
Em 13-11-2011 17:20, Antti Palosaari escreveu:
> Mauro,
> and these too for 3.3. Sorry about mistakes.
In fact, those 3 patches seemed to be good for 3.2:
576b849 [media] mxl5007t: fix reg read
d7d89dc [media] tda18218: fix 6 MHz default IF frequency
ff83bd8 [media] af9015: limit I2C access to keep FW happy
So, I've backported d7d89dc to 3.2, and applied there. the others,
I've added for 3.3.
>
> regards
> Antti
>
> On 11/13/2011 09:12 PM, Antti Palosaari wrote:
>> Moro
>>
>> These patches are rather small enchantments and should not have any
>> visible effect.
>>
>> mxl5007t change is that register read fix I have mentioned earlier. Reg
>> read is used only for checking chip ID and even if ID is not detected
>> correctly it will still work. So no functional changes.
>>
>> Antti
>>
>> The following changes since commit
>> df5f76dfef9bfaec1ff27d0a60a57a773bf87f0f:
>>
>> af9015: limit I2C access to keep FW happy (2011-11-13 03:33:30 +0200)
>>
>> are available in the git repository at:
>> git://linuxtv.org/anttip/media_tree.git af9015
>>
>> Antti Palosaari (12):
>> tda18218: implement .get_if_frequency()
>> tda18218: fix 6 MHz default IF frequency
>> af9013: use .get_if_frequency() when possible
>> mt2060: implement .get_if_frequency()
>> qt1010: implement .get_if_frequency()
>> tda18212: implement .get_if_frequency()
>> tda18212: round IF frequency to close hardware value
>> cxd2820r: switch to .get_if_frequency()
>> cxd2820r: check bandwidth earlier for DVB-T/T2
>> mxl5007t: fix reg read
>> ce6230: remove experimental from Kconfig
>> ce168: remove experimental from Kconfig
>>
>> drivers/media/common/tuners/mt2060.c | 9 +++-
>> drivers/media/common/tuners/mxl5007t.c | 3 +-
>> drivers/media/common/tuners/qt1010.c | 9 +++-
>> drivers/media/common/tuners/tda18212.c | 17 +++++++-
>> drivers/media/common/tuners/tda18218.c | 18 ++++++-
>> drivers/media/common/tuners/tda18218_priv.h | 2 +
>> drivers/media/dvb/dvb-usb/Kconfig | 4 +-
>> drivers/media/dvb/dvb-usb/anysee.c | 7 ---
>> drivers/media/dvb/frontends/af9013.c | 43 ++++--------------
>> drivers/media/dvb/frontends/cxd2820r.h | 13 ------
>> drivers/media/dvb/frontends/cxd2820r_c.c | 13 +++++-
>> drivers/media/dvb/frontends/cxd2820r_t.c | 55 +++++++++++++----------
>> drivers/media/dvb/frontends/cxd2820r_t2.c | 62 +++++++++++++++------------
>> drivers/media/video/em28xx/em28xx-dvb.c | 7 ---
>> 14 files changed, 140 insertions(+), 122 deletions(-)
>>
>>
>
>
next prev parent reply other threads:[~2011-11-24 19:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-13 19:12 [GIT PULL FOR 3.2] misc small changes, mostly get/set IF related Antti Palosaari
2011-11-13 19:20 ` Antti Palosaari
2011-11-24 19:58 ` Mauro Carvalho Chehab [this message]
2011-11-24 23:11 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ECEA1E9.2000107@redhat.com \
--to=mchehab@redhat.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mkrufky@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).