From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f46.google.com ([209.85.161.46]:49272 "EHLO mail-fx0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754664Ab1KZNbW (ORCPT ); Sat, 26 Nov 2011 08:31:22 -0500 Received: by faas1 with SMTP id s1so2460120faa.19 for ; Sat, 26 Nov 2011 05:31:20 -0800 (PST) Message-ID: <4ED0EA25.1020901@gmail.com> Date: Sat, 26 Nov 2011 14:31:17 +0100 From: Fredrik Lingvall MIME-Version: 1.0 To: Devin Heitmueller CC: linux-media@vger.kernel.org Subject: Re: Hauppauge HVR-900 HD References: <4ED00072.7070702@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 11/25/11 23:14, Devin Heitmueller wrote: > On Fri, Nov 25, 2011 at 3:54 PM, Fredrik Lingvall > wrote: >> Hi All, >> >> I have a Hauppauge HVR-900 HD with ID 2040:b138. Is this device supported, >> and if so, which driver and firmware do I need? > Hi Frank, > > It's not currently supported under Linux as it uses a demodulator that > there is currently no driver for. As far as I know, nobody's working > on it. > > Regards, > > Devin > Thanks for the info Devin. I had some hope since I found this page: http://forum.ubuntu-it.org/index.php/topic,423395.5/wap2.html The dmesg output at least shows much more than I have been able to get (I use 3.2.0-rc3 from the linuxtv git rep). They seem to be able to at least load firmware into the device. It's in Italian so I don't understand much of what they are discussing though. /Fredrik