From: Fredrik Lingvall <fredrik.lingvall@gmail.com>
To: Andy Walls <awalls@md.metrocast.net>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>,
linux-media@vger.kernel.org
Subject: Re: Hauppauge HVR-900 HD
Date: Mon, 28 Nov 2011 10:34:26 +0100 [thread overview]
Message-ID: <4ED355A2.9090000@gmail.com> (raw)
In-Reply-To: <0ef2dae0-a014-4bcb-85c8-09c67fed156f@email.android.com>
On 11/26/11 15:20, Andy Walls wrote:
> Fredrik Lingvall<fredrik.lingvall@gmail.com> wrote:
>
>> On 11/25/11 23:14, Devin Heitmueller wrote:
>>> On Fri, Nov 25, 2011 at 3:54 PM, Fredrik Lingvall
>>> <fredrik.lingvall@gmail.com> wrote:
>>>> Hi All,
>>>>
>>>> I have a Hauppauge HVR-900 HD with ID 2040:b138. Is this device
>> supported,
>>>> and if so, which driver and firmware do I need?
>>> Hi Frank,
>>>
>>> It's not currently supported under Linux as it uses a demodulator
>> that
>>> there is currently no driver for. As far as I know, nobody's working
>>> on it.
>>>
>>> Regards,
>>>
>>> Devin
>>>
>> Thanks for the info Devin. I had some hope since I found this page:
>>
>> http://forum.ubuntu-it.org/index.php/topic,423395.5/wap2.html
>>
>> The dmesg output at least shows much more than I have been able to get
>> (I use 3.2.0-rc3 from the linuxtv git rep). They seem to be able to at
>> least load firmware into the device. It's in Italian so I don't
>> understand much of what they are discussing though.
>>
>> /Fredrik
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media"
>> in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> On that page they seem to have the unit recognized and a configuration for the analog side of the unit. They also mention a Silabs SI2165 DVB-T/-C demodulator which is obviously not supported.
>
> Regards,
> Andy
They had a link to the code on the page:
http://misterox.altervista.org/cx231xx_drivers/newversion_cx231xx.tar.gz
I did a (quick) comparison with that code and the code that's in
3.2.0-rc3. From what I could see it was not a quick fix to port it to
3.2.0-rc3. I will look at it a bit more to see if I can get analog to
work too (with 3.2.0-rc3).
/Fredrik
prev parent reply other threads:[~2011-11-28 9:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 20:54 Hauppauge HVR-900 HD Fredrik Lingvall
2011-11-25 22:14 ` Devin Heitmueller
2011-11-26 13:31 ` Fredrik Lingvall
2011-11-26 14:20 ` Andy Walls
2011-11-28 9:34 ` Fredrik Lingvall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ED355A2.9090000@gmail.com \
--to=fredrik.lingvall@gmail.com \
--cc=awalls@md.metrocast.net \
--cc=dheitmueller@kernellabs.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox