From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>, josh.wu@atmel.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock
Date: Mon, 28 Nov 2011 16:01:00 +0100 [thread overview]
Message-ID: <4ED3A22C.1010701@atmel.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1111281448440.13013@axis700.grange>
On 11/28/2011 02:50 PM, Guennadi Liakhovetski :
> Hi Nicolas
>
> On Mon, 28 Nov 2011, Nicolas Ferre wrote:
>
>> From: Josh Wu <josh.wu@atmel.com>
>>
>> This patch
>> - add ISI_MCK clock enable/disable code.
>> - change field name in isi_platform_data structure
>>
>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>> [g.liakhovetski@gmx.de: fix label names]
>> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>
> Thanks for the ack. All patches, affecting drivers/media & include/media
> should go via the media tree, I'll push this one along with others for 3.3
> as appropriate.
That is just great!
On my side, I will take care of the device/board code through
at91/arm-soc trees...
Thanks, best regards,
>> ---
>> Guennadi,
>>
>> Here is the pach form Josh and yourself about the Atmel ISI driver
>> modifications. I have rebased it on top of 3.2-rc3 (and tested it on
>> linux-next also).
>> I plan to submit the board/device related patches (2-3/3 of this series) to
>> the arm-soc tree real soon. Do you whant me to include this one or can you
>> schedulle an inclusion in mainline for 3.3?
>>
>> Best regards,
>>
>> drivers/media/video/atmel-isi.c | 31 +++++++++++++++++++++++++++++--
>> include/media/atmel-isi.h | 4 +++-
>> 2 files changed, 32 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
>> index 8c775c5..5a7ab84 100644
>> --- a/drivers/media/video/atmel-isi.c
>> +++ b/drivers/media/video/atmel-isi.c
>> @@ -90,7 +90,10 @@ struct atmel_isi {
>> struct isi_dma_desc dma_desc[MAX_BUFFER_NUM];
>>
>> struct completion complete;
>> + /* ISI peripherial clock */
>> struct clk *pclk;
>> + /* ISI_MCK, feed to camera sensor to generate pixel clock */
>> + struct clk *mck;
>> unsigned int irq;
>>
>> struct isi_platform_data *pdata;
>> @@ -766,6 +769,12 @@ static int isi_camera_add_device(struct soc_camera_device *icd)
>> if (ret)
>> return ret;
>>
>> + ret = clk_enable(isi->mck);
>> + if (ret) {
>> + clk_disable(isi->pclk);
>> + return ret;
>> + }
>> +
>> isi->icd = icd;
>> dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
>> icd->devnum);
>> @@ -779,6 +788,7 @@ static void isi_camera_remove_device(struct soc_camera_device *icd)
>>
>> BUG_ON(icd != isi->icd);
>>
>> + clk_disable(isi->mck);
>> clk_disable(isi->pclk);
>> isi->icd = NULL;
>>
>> @@ -874,7 +884,7 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
>>
>> if (isi->pdata->has_emb_sync)
>> cfg1 |= ISI_CFG1_EMB_SYNC;
>> - if (isi->pdata->isi_full_mode)
>> + if (isi->pdata->full_mode)
>> cfg1 |= ISI_CFG1_FULL_MODE;
>>
>> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
>> @@ -912,6 +922,7 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev)
>> isi->fb_descriptors_phys);
>>
>> iounmap(isi->regs);
>> + clk_put(isi->mck);
>> clk_put(isi->pclk);
>> kfree(isi);
>>
>> @@ -930,7 +941,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
>> struct isi_platform_data *pdata;
>>
>> pdata = dev->platform_data;
>> - if (!pdata || !pdata->data_width_flags) {
>> + if (!pdata || !pdata->data_width_flags || !pdata->mck_hz) {
>> dev_err(&pdev->dev,
>> "No config available for Atmel ISI\n");
>> return -EINVAL;
>> @@ -959,6 +970,19 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
>> INIT_LIST_HEAD(&isi->video_buffer_list);
>> INIT_LIST_HEAD(&isi->dma_desc_head);
>>
>> + /* Get ISI_MCK, provided by programmable clock or external clock */
>> + isi->mck = clk_get(dev, "isi_mck");
>> + if (IS_ERR_OR_NULL(isi->mck)) {
>> + dev_err(dev, "Failed to get isi_mck\n");
>> + ret = isi->mck ? PTR_ERR(isi->mck) : -EINVAL;
>> + goto err_clk_get;
>> + }
>> +
>> + /* Set ISI_MCK's frequency, it should be faster than pixel clock */
>> + ret = clk_set_rate(isi->mck, pdata->mck_hz);
>> + if (ret < 0)
>> + goto err_set_mck_rate;
>> +
>> isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
>> sizeof(struct fbd) * MAX_BUFFER_NUM,
>> &isi->fb_descriptors_phys,
>> @@ -1034,6 +1058,9 @@ err_alloc_ctx:
>> isi->p_fb_descriptors,
>> isi->fb_descriptors_phys);
>> err_alloc_descriptors:
>> +err_set_mck_rate:
>> + clk_put(isi->mck);
>> +err_clk_get:
>> kfree(isi);
>> err_alloc_isi:
>> clk_put(isi->pclk);
>> diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
>> index 26cece5..6568230 100644
>> --- a/include/media/atmel-isi.h
>> +++ b/include/media/atmel-isi.h
>> @@ -110,10 +110,12 @@ struct isi_platform_data {
>> u8 hsync_act_low;
>> u8 vsync_act_low;
>> u8 pclk_act_falling;
>> - u8 isi_full_mode;
>> + u8 full_mode;
>> u32 data_width_flags;
>> /* Using for ISI_CFG1 */
>> u32 frate;
>> + /* Using for ISI_MCK */
>> + u32 mck_hz;
>> };
>>
>> #endif /* __ATMEL_ISI_H__ */
>> --
>> 1.7.5.4
>>
>
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
>
--
Nicolas Ferre
next prev parent reply other threads:[~2011-11-28 15:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 13:34 [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock Nicolas Ferre
2011-11-28 13:50 ` Guennadi Liakhovetski
2011-11-28 15:01 ` Nicolas Ferre [this message]
2011-11-28 16:00 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ED3A22C.1010701@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=g.liakhovetski@gmx.de \
--cc=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox