public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@iki.fi>
To: Alex Gershgorin <alexg@meprolight.com>
Cc: "laurent.pinchart@ideasonboard.com"
	<laurent.pinchart@ideasonboard.com>,
	"Hiroshi.DOYU@nokia.com" <Hiroshi.DOYU@nokia.com>,
	"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: Re: OMAP3ISP boot problem
Date: Sat, 10 Dec 2011 10:23:39 +0200	[thread overview]
Message-ID: <4EE3170B.7000807@iki.fi> (raw)
In-Reply-To: <4875438356E7CA4A8F2145FCD3E61C0B2C89899243@MEP-EXCH.meprolight.com>

Hi Alex,

Alex Gershgorin wrote:
> Hi All,
>
> I have problem in booting the Kernel.
> Here the problematic part of the boot message.
> As I understand it happens when isp_probe calling and it calls isp->iommu_dev = omap_find_iommu_device("isp");
>
> [    1.976715] Linux media interface: v0.10
> [    1.981781] Linux video capture interface: v2.00
> [    1.989257] omap3isp omap3isp: Revision 2.0 found
> [    1.998138] Unable to handle kernel NULL pointer dereference at virtual address 00000050
> [    2.006683] pgd = c0004000
> [    2.010009] [00000050] *pgd=00000000
> [    2.013793] Internal error: Oops: 5 [#1]
> [    2.017913] Modules linked in:
> [    2.021148] CPU: 0    Tainted: G        W     (3.2.0-rc4-00002-g2d47fa7-dirty #1304)
> [    2.029296] PC is at klist_next+0x10/0xc4
> [    2.033508] LR is at next_device+0x8/0x14
> [    2.037750] pc : [<c03c032c>]    lr : [<c0251e5c>]    psr: 60000013
> [    2.037750] sp : c7425eb0  ip : c05e080c  fp : 00000000
> [    2.049804] r10: c04b2367  r9 : c058b4f8  r8 : 000003ff
> [    2.055297] r7 : 0000000e  r6 : 00000000  r5 : c031827c  r4 : c7425ed0
> [    2.062164] r3 : c031827c  r2 : 00000000  r1 : c7425ed0  r0 : 00000024
> [    2.069000] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> [    2.076690] Control: 10c5387d  Table: 80004019  DAC: 00000015
> [    2.082733] Process swapper (pid: 1, stack limit = 0xc74242f0)
> [    2.088867] Stack: (0xc7425eb0 to 0xc7426000)
> [    2.093444] 5ea0:                                     c031827c c04ae343 c031827c c05d7650
> [    2.102050] 5ec0: 0000000e c0251e5c c031827c c0251ec8 00000024 00000000 c76e8000 000074e0
> [    2.110656] 5ee0: c058b4f0 c030462c 00000000 c01181e4 c058b4f8 c0055f04 00000000 c76e8508
> [    2.119232] 5f00: c74976c0 00000000 c05d4fe4 c058b4f8 c058b52c c05d4fe4 c05d4fe4 00000000
> [    2.127838] 5f20: 00000000 00000000 00000000 c0252784 c0252770 c02515e4 00000000 c058b4f8
> [    2.136444] 5f40: c058b52c c05d4fe4 00000000 c0251708 c05d4fe4 c02516a0 00000000 c0250e20
> [    2.145050] 5f60: c7420058 c7481490 c05d4fe4 c76c9140 c05c45d0 c0250768 c04ae33e 00000000
> [    2.153656] 5f80: c7423340 c05d4fe4 c056e4cc c000dbfc 00000000 00000000 00000000 c0251d20
> [    2.162231] 5fa0: c0583210 c056e4cc c000dbfc 00000000 00000000 c000857c c0582dd0 00003539
> [    2.170837] 5fc0: 00000000 c0000000 00000013 c0583210 c0582dd0 c000dbfc 00000013 00000000
> [    2.179443] 5fe0: 00000000 c0553204 c7423340 00000000 c0553194 c000dbfc bf0285ff fb000400
> [    2.188049] [<c03c032c>] (klist_next+0x10/0xc4) from [<c0251e5c>] (next_device+0x8/0x14)
> [    2.196563] [<c0251e5c>] (next_device+0x8/0x14) from [<c0251ec8>] (driver_find_device+0x60/0x78)
> [    2.205841] [<c0251ec8>] (driver_find_device+0x60/0x78) from [<c030462c>] (isp_probe+0x238/0xa5c)
> [    2.215179] [<c030462c>] (isp_probe+0x238/0xa5c) from [<c0252784>] (platform_drv_probe+0x14/0x18)
> [    2.224517] [<c0252784>] (platform_drv_probe+0x14/0x18) from [<c02515e4>] (driver_probe_device+0xc8/0x184)
> [    2.234680] [<c02515e4>] (driver_probe_device+0xc8/0x184) from [<c0251708>] (__driver_attach+0x68/0x8c)
> [    2.244567] [<c0251708>] (__driver_attach+0x68/0x8c) from [<c0250e20>] (bus_for_each_dev+0x48/0x74)
> [    2.254058] [<c0250e20>] (bus_for_each_dev+0x48/0x74) from [<c0250768>] (bus_add_driver+0xa0/0x21c)
> [    2.263580] [<c0250768>] (bus_add_driver+0xa0/0x21c) from [<c0251d20>] (driver_register+0xa4/0x130)
> [    2.273101] [<c0251d20>] (driver_register+0xa4/0x130) from [<c000857c>] (do_one_initcall+0x98/0x16c)
> [    2.282714] [<c000857c>] (do_one_initcall+0x98/0x16c) from [<c0553204>] (kernel_init+0x70/0x118)
> [    2.291992] [<c0553204>] (kernel_init+0x70/0x118) from [<c000dbfc>] (kernel_thread_exit+0x0/0x8)
> [    2.301208] Code: e92d40f8 e1a04000 e5900000 e5946004 (e590702c)
> [    2.307708] ---[ end trace 1b75b31a2719ed1e ]---
> [    2.312652] Kernel panic - not syncing: Attempted to kill init!
>
> I will appreciate any help.

Just a stupid question... do you have CONFIG_OMAP_IOMMU and 
CONFIG_OMAP_IOVMM enabled? This is a known problem; the real fix 
involves using dmabuf instead of the IOMMU/IOVMM API.

Regards,

-- 
Sakari Ailus
sakari.ailus@iki.fi

  reply	other threads:[~2011-12-10  8:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <4875438356E7CA4A8F2145FCD3E61C0B2C8989923C@MEP-EXCH.meprolight.com>
2011-12-10  8:02 ` OMAP3ISP boot problem Alex Gershgorin
2011-12-10  8:23   ` Sakari Ailus [this message]
2011-12-10  8:53     ` Alex Gershgorin
2011-12-10  9:12       ` Sakari Ailus
2011-12-10 13:36         ` Alex Gershgorin
2011-12-10 14:45           ` Laurent Pinchart
2011-12-10 17:10             ` Alex Gershgorin
2011-12-11 10:56               ` Alex Gershgorin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EE3170B.7000807@iki.fi \
    --to=sakari.ailus@iki.fi \
    --cc=Hiroshi.DOYU@nokia.com \
    --cc=alexg@meprolight.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox