linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, dacohen@gmail.com, snjw23@gmail.com
Subject: Re: [RFC 05/17] v4l: Support s_crop and g_crop through s/g_selection
Date: Sun, 08 Jan 2012 22:54:20 +0200	[thread overview]
Message-ID: <4F0A027C.1090904@maxwell.research.nokia.com> (raw)
In-Reply-To: <201201051713.58513.laurent.pinchart@ideasonboard.com>

Hi Laurent,

Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thanks for the patch.
> 
> On Tuesday 20 December 2011 21:27:57 Sakari Ailus wrote:
>> From: Sakari Ailus <sakari.ailus@iki.fi>
>>
>> Revert to s_selection if s_crop isn't implemented by a driver. Same for
>> g_selection / g_crop.
> 
> Shouldn't this say "Fall back" instead of "Revert" ?

Fixed all issues you mentioned in this e-mail.

>> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
>> ---
>>  drivers/media/video/v4l2-subdev.c |   37
>> +++++++++++++++++++++++++++++++++++-- 1 files changed, 35 insertions(+), 2
>> deletions(-)
>>
>> diff --git a/drivers/media/video/v4l2-subdev.c
>> b/drivers/media/video/v4l2-subdev.c index e8ae098..f8de551 100644
>> --- a/drivers/media/video/v4l2-subdev.c
>> +++ b/drivers/media/video/v4l2-subdev.c
>> @@ -226,6 +226,8 @@ static long subdev_do_ioctl(struct file *file, unsigned
>> int cmd, void *arg)
>>
>>  	case VIDIOC_SUBDEV_G_CROP: {
>>  		struct v4l2_subdev_crop *crop = arg;
>> +		struct v4l2_subdev_selection sel;
>> +		int rval;
>>
>>  		if (crop->which != V4L2_SUBDEV_FORMAT_TRY &&
>>  		    crop->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>> @@ -234,11 +236,27 @@ static long subdev_do_ioctl(struct file *file,
>> unsigned int cmd, void *arg) if (crop->pad >= sd->entity.num_pads)
>>  			return -EINVAL;
>>
>> -		return v4l2_subdev_call(sd, pad, get_crop, subdev_fh, crop);
>> +		rval = v4l2_subdev_call(sd, pad, get_crop, subdev_fh, crop);
>> +		if (rval != -ENOIOCTLCMD)
>> +			return rval;
>> +
>> +		memset(&sel, 0, sizeof(sel));
>> +		sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> 
> Shouldn't sel.which be set to crop->which ?
> 
>> +		sel.pad = crop->pad;
>> +		sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE;
>> +
>> +		rval = v4l2_subdev_call(
>> +			sd, pad, get_selection, subdev_fh, &sel);
>> +
>> +		crop->rect = sel.r;
>> +
>> +		return rval;
>>  	}
>>
>>  	case VIDIOC_SUBDEV_S_CROP: {
>>  		struct v4l2_subdev_crop *crop = arg;
>> +		struct v4l2_subdev_selection sel;
>> +		int rval;
>>
>>  		if (crop->which != V4L2_SUBDEV_FORMAT_TRY &&
>>  		    crop->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>> @@ -247,7 +265,22 @@ static long subdev_do_ioctl(struct file *file,
>> unsigned int cmd, void *arg) if (crop->pad >= sd->entity.num_pads)
>>  			return -EINVAL;
>>
>> -		return v4l2_subdev_call(sd, pad, set_crop, subdev_fh, crop);
>> +		rval = v4l2_subdev_call(sd, pad, set_crop, subdev_fh, crop);
>> +		if (rval != -ENOIOCTLCMD)
>> +			return rval;
>> +
>> +		memset(&sel, 0, sizeof(sel));
>> +		sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> 
> Same here.
> 
>> +		sel.pad = crop->pad;
>> +		sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE;
>> +		sel.r = crop->rect;
>> +
>> +		rval = v4l2_subdev_call(
>> +			sd, pad, set_selection, subdev_fh, &sel);
>> +
>> +		crop->rect = sel.r;
>> +
>> +		return rval;
>>  	}
>>
>>  	case VIDIOC_SUBDEV_ENUM_MBUS_CODE: {
> 


-- 
Sakari Ailus
sakari.ailus@maxwell.research.nokia.com

  reply	other threads:[~2012-01-08 20:54 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-20 20:27 [RFC 0/17] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
2011-12-20 20:27 ` [RFC 01/17] v4l: Introduce integer menu controls Sakari Ailus
2012-01-05 15:53   ` Laurent Pinchart
2012-01-06  9:50     ` Sakari Ailus
2011-12-20 20:27 ` [RFC 02/17] v4l: Document " Sakari Ailus
2012-01-05 15:55   ` Laurent Pinchart
2012-01-06 10:07     ` Sakari Ailus
2011-12-20 20:27 ` [RFC 03/17] vivi: Add an integer menu test control Sakari Ailus
2012-01-05 15:59   ` Laurent Pinchart
2012-01-06 10:19     ` Sakari Ailus
2012-01-06 10:22       ` Sakari Ailus
2012-01-06 10:28         ` Laurent Pinchart
2011-12-20 20:27 ` [RFC 04/17] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs Sakari Ailus
2012-01-05 16:12   ` Laurent Pinchart
2012-01-06 11:27     ` Sakari Ailus
2012-01-06 12:00       ` Laurent Pinchart
2012-01-07  9:09         ` Sakari Ailus
2012-01-07 11:09           ` Sakari Ailus
2012-01-07 15:54             ` Laurent Pinchart
2012-01-07 16:53               ` Sakari Ailus
2011-12-20 20:27 ` [RFC 05/17] v4l: Support s_crop and g_crop through s/g_selection Sakari Ailus
2012-01-05 16:13   ` Laurent Pinchart
2012-01-08 20:54     ` Sakari Ailus [this message]
2011-12-20 20:27 ` [RFC 06/17] v4l: Add selections documentation Sakari Ailus
2012-01-06 11:43   ` Laurent Pinchart
2012-01-09 18:16     ` Sakari Ailus
2012-01-10 11:20       ` Tomasz Stanislawski
2012-01-14 19:04         ` Sakari Ailus
2012-01-15 22:53       ` Laurent Pinchart
2011-12-20 20:27 ` [RFC 07/17] v4l: Add pixelrate to struct v4l2_mbus_framefmt Sakari Ailus
2012-01-06 10:26   ` Laurent Pinchart
2012-01-08 21:16     ` Sakari Ailus
2011-12-20 20:28 ` [RFC 08/17] v4l: Image source control class Sakari Ailus
2012-01-05 16:23   ` Laurent Pinchart
2012-01-14 20:51     ` Sakari Ailus
2012-01-15  1:43       ` Laurent Pinchart
2012-01-15 19:44         ` Sakari Ailus
2012-01-15 20:00           ` Laurent Pinchart
2012-01-15 21:27             ` Sakari Ailus
2012-01-15 16:16       ` Sylwester Nawrocki
2012-01-15 19:30         ` Sakari Ailus
2012-01-15 20:08           ` Sylwester Nawrocki
2011-12-20 20:28 ` [RFC 09/17] v4l: Add pad op for pipeline validation Sakari Ailus
2012-01-06  9:42   ` Laurent Pinchart
2012-01-07 23:28     ` Sakari Ailus
2012-01-08 18:20       ` Laurent Pinchart
2011-12-20 20:28 ` [RFC 10/17] omap3: add definition for CONTROL_CAMERA_PHY_CTRL Sakari Ailus
2011-12-20 20:28 ` [RFC 11/17] omap3isp: Implement validate_pipeline Sakari Ailus
2011-12-20 20:28 ` [RFC 12/17] omap3isp: Add lane configuration to platform data Sakari Ailus
2012-01-06 10:06   ` Laurent Pinchart
2012-01-07 23:39     ` Sakari Ailus
2011-12-20 20:28 ` [RFC 13/17] omap3isp: Configure CSI-2 phy based on " Sakari Ailus
2012-01-06 10:01   ` Laurent Pinchart
2012-01-07 22:51     ` Sakari Ailus
2012-01-08  1:02       ` Laurent Pinchart
2012-01-08 10:26         ` Sakari Ailus
2012-01-08 11:07           ` Sylwester Nawrocki
2012-01-08 11:16             ` Sakari Ailus
2012-01-08 13:09               ` Sylwester Nawrocki
2012-01-11  8:08                 ` Sakari Ailus
2012-01-08 11:15           ` Laurent Pinchart
2011-12-20 20:28 ` [RFC 14/17] omap3isp: Use pixelrate from sensor media bus frameformat Sakari Ailus
2012-01-06 10:14   ` Laurent Pinchart
2012-01-07 23:05     ` Sakari Ailus
2011-12-20 20:28 ` [RFC 15/17] omap3isp: Move definitions required by board code under include/media Sakari Ailus
2011-12-20 20:28 ` [RFC 16/17] smiapp: Add driver Sakari Ailus
2012-01-06 17:12   ` Sylwester Nawrocki
2012-01-07 23:01     ` Sakari Ailus
2012-01-16 21:57       ` Sylwester Nawrocki
2011-12-20 20:28 ` [RFC 17/17] rm680: Add camera init Sakari Ailus
2012-01-06 10:21   ` Laurent Pinchart
2012-01-07 21:30     ` Sakari Ailus
2012-01-06 14:58   ` Sylwester Nawrocki
2012-01-07 22:59     ` Sakari Ailus
2011-12-28  9:47 ` [yavta PATCH 1/1] Support integer menus Sakari Ailus
2012-01-05 16:03   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F0A027C.1090904@maxwell.research.nokia.com \
    --to=sakari.ailus@maxwell.research.nokia.com \
    --cc=dacohen@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=snjw23@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).