From: Michael Krufky <mkrufky@linuxtv.org>
To: linux-media@vger.kernel.org
Subject: Re: [git:v4l-dvb/for_v3.3] [media] DVB: dib0700, add support for Nova-TD LEDs
Date: Wed, 18 Jan 2012 08:18:48 -0500 [thread overview]
Message-ID: <4F16C6B8.8000402@linuxtv.org> (raw)
In-Reply-To: <E1RnU5E-0000Vf-T9@www.linuxtv.org>
Mauro,
Why was my sign-off changed to an Ack?
As you can see, I worked *with* Jiri to help him create this patchset.
During review, I noticed a poorly named function, which I renamed before
pusging it into my own tree. Patrick saw this, and merged my changes
into into his tree.
Why did I go through this effort to help another developer add value to
one of our drivers, and additional effort to make a small cleanup, push
the changes into my own tree and issue a pull request? I was thanked by
Patrick. Everybody's signature is on the patch, but you then go and
remove my signature, and add a forged "ack"? I don't understand this,
Mauro.
Why didn't you just take my pull request? Instead, you have changed my
signature? What is the point of a signature if it will become mangled?
Please don't do this. Or, if you have *some* legitimate reason to
change my signature, you should at LEAST check with me before committing
it into kernel history.
-Mike
On 01/17/2012 08:02 PM, Mauro Carvalho Chehab wrote:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/media_tree.git tree:
>
> Subject: [media] DVB: dib0700, add support for Nova-TD LEDs
> Author: Jiri Slaby<jslaby@suse.cz>
> Date: Tue Jan 10 14:11:25 2012 -0300
>
> Add an override of read_status to intercept lock status. This allows
> us to switch LEDs appropriately on and off with signal un/locked.
>
> The second phase is to override sleep to properly turn off both.
>
> This is a hackish way to achieve that.
>
> Thanks to Mike Krufky for his help.
>
> Signed-off-by: Jiri Slaby<jslaby@suse.cz>
> Acked-by: Michael Krufky<mkrufky@linuxtv.org>
> Signed-off-by: Patrick Boettcher<pboettcher@kernellabs.com>
> Signed-off-by: Mauro Carvalho Chehab<mchehab@redhat.com>
>
> drivers/media/dvb/dvb-usb/dib0700.h | 2 +
> drivers/media/dvb/dvb-usb/dib0700_devices.c | 41 ++++++++++++++++++++++++++-
> 2 files changed, 42 insertions(+), 1 deletions(-)
>
> ---
>
> http://git.linuxtv.org/media_tree.git?a=commitdiff;h=d43272a4e898a1e43e5ac351ab625b7a40b39e88
>
> diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
> index 9bd6d51..7de125c 100644
> --- a/drivers/media/dvb/dvb-usb/dib0700.h
> +++ b/drivers/media/dvb/dvb-usb/dib0700.h
> @@ -48,6 +48,8 @@ struct dib0700_state {
> u8 disable_streaming_master_mode;
> u32 fw_version;
> u32 nb_packet_buffer_size;
> + int (*read_status)(struct dvb_frontend *, fe_status_t *);
> + int (*sleep)(struct dvb_frontend* fe);
> u8 buf[255];
> };
>
> diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
> index 3ab45ae..f9e966a 100644
> --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
> +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
> @@ -3105,6 +3105,35 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
> return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
> }
>
> +static int novatd_read_status_override(struct dvb_frontend *fe,
> + fe_status_t *stat)
> +{
> + struct dvb_usb_adapter *adap = fe->dvb->priv;
> + struct dvb_usb_device *dev = adap->dev;
> + struct dib0700_state *state = dev->priv;
> + int ret;
> +
> + ret = state->read_status(fe, stat);
> +
> + if (!ret)
> + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
> + !!(*stat& FE_HAS_LOCK));
> +
> + return ret;
> +}
> +
> +static int novatd_sleep_override(struct dvb_frontend* fe)
> +{
> + struct dvb_usb_adapter *adap = fe->dvb->priv;
> + struct dvb_usb_device *dev = adap->dev;
> + struct dib0700_state *state = dev->priv;
> +
> + /* turn off LED */
> + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
> +
> + return state->sleep(fe);
> +}
> +
> /**
> * novatd_frontend_attach - Nova-TD specific attach
> *
> @@ -3114,6 +3143,7 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
> static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
> {
> struct dvb_usb_device *dev = adap->dev;
> + struct dib0700_state *st = dev->priv;
>
> if (adap->id == 0) {
> stk7070pd_init(dev);
> @@ -3134,7 +3164,16 @@ static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
> adap->fe_adap[0].fe = dvb_attach(dib7000p_attach,&dev->i2c_adap,
> adap->id == 0 ? 0x80 : 0x82,
> &stk7070pd_dib7000p_config[adap->id]);
> - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
> +
> + if (adap->fe_adap[0].fe == NULL)
> + return -ENODEV;
> +
> + st->read_status = adap->fe_adap[0].fe->ops.read_status;
> + adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
> + st->sleep = adap->fe_adap[0].fe->ops.sleep;
> + adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
> +
> + return 0;
> }
>
> /* S5H1411 */
next parent reply other threads:[~2012-01-18 13:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1RnU5E-0000Vf-T9@www.linuxtv.org>
2012-01-18 13:18 ` Michael Krufky [this message]
2012-01-18 13:54 ` [git:v4l-dvb/for_v3.3] [media] DVB: dib0700, add support for Nova-TD LEDs Patrick Boettcher
2012-01-18 14:38 ` Michael Krufky
2012-01-18 15:20 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F16C6B8.8000402@linuxtv.org \
--to=mkrufky@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox