From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:50125 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751257Ab2AZXMd (ORCPT ); Thu, 26 Jan 2012 18:12:33 -0500 Message-ID: <4F21DDDF.60804@iki.fi> Date: Fri, 27 Jan 2012 01:12:31 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Jesper Krogh CC: linux-media@vger.kernel.org Subject: Re: Anysee E30 S2 plus References: <4EF04250.9020502@iki.fi> <4EF0A68C.4040201@iki.fi> In-Reply-To: <4EF0A68C.4040201@iki.fi> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 12/20/2011 05:15 PM, Antti Palosaari wrote: > On 12/20/2011 02:10 PM, Jesper Krogh wrote: >> Ok. I had my doubts on whether to include that or not - But here it is >> >> /Jesper >> >> [ 1056.137882] DVB: registering new adapter (Anysee DVB USB2.0) >> [ 1056.141938] anysee: firmware version:1.3 hardware id:11 >> [ 1056.145212] Invalid probe, probably not a CX24116 device >> [ 1056.145231] anysee: Unsupported Anysee version. Please report the >> . > > Check your power supply is connected. It do same here without power > supply since demod is powered using external power supply. > > If not then it is most likely firmware issue. I have very old firmware, > maybe one of the first devel versions. I got today similar bug report and after debugging we found there is different hardware. Whole NIM, that is box containing demodulator and tuner, is different. Instead of old CX24116 there is same NIM than can be found from the E7 serie DVB-S2 receiver. So I have to get this new revision of that device in order to add support for it... Sorry :/ regards Antti -- http://palosaari.fi/