From: Oliver Schinagl <oliverlist@schinagl.nl>
To: Jan Prunk <janprunk@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: Re: ASUS U3100 Mini
Date: Sat, 07 Apr 2012 22:15:41 +0200 [thread overview]
Message-ID: <4F80A06D.8080504@schinagl.nl> (raw)
In-Reply-To: <CALnoPX4UJuzC9svAVPAs56YfDE7Ex92c1kpj+2X5shWRVQ4JxQ@mail.gmail.com>
Hi Jan,
That page is probably not supported by linux-media and shows support
(currently not working afaik) forthe U3100 mini PLUS. yes, minor
difference in name, huge difference inside. The non-plus is a dib0700
based device, whereas the Plus is a af9035 based device. The non-plus
should work out of the box on most distro's.
Oliver
On 07-04-12 20:21, Jan Prunk wrote:
> Hi !
>
> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
> TV streams with it on Debian. The dongle when its plugged in lights with
> the green light. Performing "(dvb)scan" segfaults.
>
> I (partially) followed these guides:
>
> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
>
> I am using debian testing and it seems the device gets somehow recognised:
>
> [15120.976095] usb 3-1: USB disconnect, device number 2
> [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
> [15124.848958] usb 1-3: New USB device found, idVendor=0b05, idProduct=173f
> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner
> [15124.848974] usb 1-3: Manufacturer: ASUSTeK
> [15124.848977] usb 1-3: SerialNumber: 8500500875
> [15125.344564] IR NEC protocol handler initialized
> [15125.370992] IR RC5(x) protocol handler initialized
> [15125.409376] dib0700: loaded with support for 21 different device-types
> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
> in cold state, will try to load a firmware
> [15125.412893] IR RC6 protocol handler initialized
> [15125.440888] IR JVC protocol handler initialized
> [15125.463698] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
> [15125.465236] IR Sony protocol handler initialized
> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized
> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249
> [15125.474883] IR LIRC bridge handler initialized
> [15125.671203] dib0700: firmware started successfully.
> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
> in warm state.
> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
> to the software demuxer.
> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
> DVBT Tuner)
> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
> [15126.607078] DiB0070: successfully identified
> [15126.708031] Registered IR keymap rc-dib0700-rc5
> [15126.708271] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
> successfully initialized and connected.
> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
> 4 in libc-2.13.so[b75e2000+156000]
> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
> 4 in libc-2.13.so[b7631000+156000]
>
> After this I used the guide at:
> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
>
> Which resulted into:
> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana> ~/.tzap/channels.conf
> scanning /usr/share/dvb/dvb-t/si-Ljubljana
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 602000000 0 2 9 3 1 3 0
> initial transponder 514000000 0 2 9 3 1 2 0
>>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> WARNING:>>> tuning failed!!!
>>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
> WARNING:>>> tuning failed!!!
>>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> WARNING:>>> tuning failed!!!
>>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
> WARNING:>>> tuning failed!!!
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> So I seem to be stuck here.
>
> I please for some guidance here, thank you !
>
> Kind regards,
> Jan Prunk
next prev parent reply other threads:[~2012-04-07 20:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-07 18:21 ASUS U3100 Mini Jan Prunk
2012-04-07 20:15 ` Oliver Schinagl [this message]
2012-04-07 21:32 ` Jan Prunk
2012-04-10 9:32 ` Oliver Schinagl
2012-04-14 14:43 ` Jan Prunk
2012-04-15 8:26 ` Jan Prunk
2012-04-15 18:43 ` Oliver Schinagl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F80A06D.8080504@schinagl.nl \
--to=oliverlist@schinagl.nl \
--cc=janprunk@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox